HOW TO TEST YOUR OWN WELDS AT HOME // PIPE WELDING PRACTICE (I broke my vise!!!😳)
Вставка
- Опубліковано 19 бер 2020
- HOW TO INSPECT YOUR OWN WELDS AT HOME? A pipe weld bend test is common but you can also nic the straps to make it easier to do it yourself as your practice for pipeline downhill welding and any b31.3 welding test or api 1104 weld test. I’m Austin Ross a pipeline welder and on this channel, I like to share my experience pipeline welding to help others. Pipe weld test aren’t something you have to take under inspection to know if you could pass or not. X ray weld test are common but they also use visual inspection which you too can utilize. Testing of welding joints via welding visual inspection is what I’m coving in this video.
If you are new to pipeline welding test or wonder what you would need to pass on pipeline welding test day then watch this video on how to test welds at home. Make sure to subscribe for more pipe welding videos.
AROSSWELDING SHOP: www.arosswelding.com/shop
Winter workwear - • WELDING APPAREL (FOR P...
Workwear & Gear playlist: • EMPYRE SOUTH PANCAKE W...
Busted weld test - • PIPELINE WELDING TEST ...
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
JOIN THE INNER CIRCLE: arosswelding.mn.co/landing/pl...
Details about the Inner Circle: arosswelding.mn.co
Subscribe:
www.arosswelding.com/subscribe
Industrial Tradition:
industrialtradition.com/colle...
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Social Media links - come hang out after hours.
My Instagram: / arosswelding
My Facebook that I never use: / arosswelding
Our company links: Industrial Tradition
www.industrialtradition.com
Facebook: / industrialtr. .
Instagram: / industrial_. .
Pinterest: / industrialt. .
UA-cam: / industrialtradition
Our vlog channel: / austinandkayla
My wife's instagram: / thekaylaross
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Other stuff
Shop Amazon: amzn.to/2vwHqVv
My favorite products + things I trust and use:
kit.com/arosswelding
man that bench vice scene was funny
wasnt expecting it
Kyle Pitre check out my UA-cam channel
I bought a vise about that size for my personal use in our shop. I let one guy use it and he managed to break the vise off like that by putting a ten foot cheater on a piece of round bar to bend it. No bend but it did snap the vise off.
Now you can make a video welding that vice, it would be awsome learn how to weld cast iron or steel
it will break again. Even if you silicon "cool" it and V bevel the entire break, it will break again. Cast is extremely dirty and the mixture isn't consistent, so you have a lot of dirty spots or high iron deposits in it. Sure, you can weld it, but it's eventually going to break right at the toe of your weld.
@@michaelalmeida8790 not if you weld it with the right rods. Too many guys try to lohy it because cast rods are $11 per rod
Mig weld it or tig
Thanks for the great video, I'm going to start nick testing some of my welds - and thanks for including the broken vise clip, it's nice to see that those kinds of things happen to the best of us ...
There must be something unusual about me. Everyone else seems to have laughed heartily at your breaking vise. I was probably more upset than you were.
Really enjoy the actual welding videos .
I'm hoping to start the apprentice program for UA430 here in Tulsa and I've been watching your videos for the last two weeks. Your videos are filled with a lot of great information. I really appreciate this videos. I hope I get into the program and do a great job. Thank you Austin for making these videos
I'm glad to know I'm not the only one too brake a vice like that, I've actually broke two it was funny to see someone else do it
Love this channel thanks ross. Its my days off and ill probably watch every video you got.👊👊👊👊👊
Man, that's the prettiest, nicest, amazing weld I've ever seen. Shiny and in order. Great job !!!!
Good job Austin, , thanks for sharing with us 👍👍
I hope all is well and that you’ll get back on the ROW soon brother
Well dang!! I wasn’t expecting that vice to break! Glad you didn’t break the umbrella holder! Enjoyed the video and be safe.
Haha I know. I didn’t either lol 🤦♂️
They dont make tools like they used to . Love your passion . If we're not passionate then theres no integrity. Equals DCM . Love your work bro.
I guess the fact that you were able to break your vice before your test strap shows how good of a welder you are.
Please more welding videos! Keep up the great work... look forward to every Friday wish you had a video everyday lol
That part where you broke that vice was priceless.
My goodness, I haven't laughed so hard at a video in quite a while. Glad you were rolling when the vice gave up, what a riot.
Pipeline welder for 20 years. Now Inspector. Just remember slag can’t stand heat and a worm can’t live in a bottle of tequila!
That's right. Run so hot nothing will live in it.
Really in joy your Videos
Thanks man
I have years of welding experience but I didn't have a clue of how to test my stuff.
that bench vise breaking had me laughing so hard
Anthony Nadeau check out my UA-cam channel
@@Fonvilles I checked it out. It’s trash
@@TheClamy8911 😂😂 your face is trash
What's up from Odessa Texas. Great videos man keep it up hill buddy
Those good pliers. Thanks for the videos.
Oh my goodness, I don't laugh at much but when that vise broke I couldn't help it. I don't care who you are, that shit was funny!
Bonjour brade,je sui ravie de vous avoir vu votre expérience professionnel de bon conseil et courage force 👍
Never seen a test like that but that's cool. If you bought the vise 7 years ago you got your money's worth at least the weld held!
Awesome video mr Austin
Thanks, that was awesome.
This is a badass video man
Great material show how to professionally weld such a vice as much as possible :)
love the videos! keep up the entertainment!
Great video, thank you.
That vice breaking busted my gut laughing. Lol. Funny stuff.
Lmao the silence after that vice broke priceless
Man this is all greek to me. Love both of yalls videos though. Keep them coming! God bless yall!
Austin's next video, how to repair cast iron vice using Nickel 99 rods 😬😬 just kiddin austin, you know youtube subscribers love ya 👍👍
Awesome vid and thanks for the advice. Going to have to try bending one now lol
Lookin sharp sir
S/B once in once out as told from an old flame cutter i worked under in my younger years
That moment you realize, “ I just broke a vice with a weld “🤔😎
Laughed way to hard and loud at the vice breaking. Love your videos keep it up.
Great video! The vise incident made me laugh (sorry) ,time for a Wilton vise. Great info. Stay healthy thru these virus times
Lol ya that’s right. I’ve been needin to get a good one anyway.
That what happens when your a good welder, U brake your vise, 😆GREAT VIDEO Thanks William Orange county, ca. I think it's time to Make your own vise !!
Damn Bro...It's a first time for everything!
14:02 sounds like Matthew McConaughey in Dazed and Confused..alright alright alright!
A small car jack inside a H beam works better for bending & break test!!!!!!!! We always used a hacksaw to cut the grove for a break test!!!!!!
New Vise time. YESSSSSS
Now we need a video welding that vice!!!
That's what I thought as well right when it broke.
repairman worker just don’t say a bad word when it broke-
Saw that vise coming to an end fast
Hi Austin, Are you going to do a video on welding up a vice? It would be great to see that.
Nice break
When the vise broke, "you've got to be kidding me" .... Hilarious!!!
Eric Turner I’m trying not to say a bad word when something like that happens. My wife says I shouldn’t. So- after 34 years lm trying to listen to her. #$&@
A Clean tip is the key to cutting Clean.
Dang, dawg! You are one tough mutha' and so are your welds! Your vise broke before your welds did! LOL!
A piece of 3/32” soapstone that small in your holder is a low key flex change my mind 😂 lol
Do a bend test vid!
the bead hand from the promise land!
Just bought my first welding tailer, i love it and im about to build 600 feet of pipe fence
My girls tablet started blaring at the end when you were giving advise for the day I told her to turn it down and she said I was impatient I told her God was talking and she interrupted Him🤣
I laughed so hard witnessing that broken vise. That's hard steel it shouldn't break lol good vid.
Not hard steel. Cast Iron.
@@bradtucker8362 oh. Well hope Ross makes a video repairing Ald welding cast iron. 👍
Damn. I say your strong Austin. But thats crazy how it just broke
Have you ever thought about getting into tig, and checking out refinery rig welding? I just started welding, I bought a 300 and got set up for tig and stick. I live two blocks from a Sinclair refinery. Your videos have been great! Keep em coming
Matt Fritz check out my UA-cam channel
When your off work for a year you think about doing a lot of differant things. thats good being near refinery but you dont have a job there and might not ever work there. Might be a good place to work though. . Im thinking the refinery has a contractor and that contractor hires rig welders. best bet be a shutdown temporary. it could happen but have a backup plan
Fxnville ok.
Jeff Y I do work out here. Have for ten years. I’m fairly connected. The refinery managers, contractor owners. All go to my church. I’m already set to be broke out soon as I can pass the test.
Com'on... You been in the oil field on the pipe side for a very long time Sir.
I'm really wanting to start welding school. The only thing stopping me me from starting is that I'm on suboxone right not, I'm going to be tapering off for the next 2-3 months. But I'm having bad sleep patterns and it's like hell waking up in the morning. I feel I'm not at my best. I'm stuck with the decision of starting next month while I'm still taking suboxone and not at my best but push through it. Or wait till I'm totally off of it which will be some time.
I busted out laughing from a personal experience breaking the ol vice in the same spot.
oxy-acetylene vs. plasma, why do you run/prefer one over the other?
You can also buy coupon benders online
Next video.... vice comparisons... quality cost sizes and capabilities... 😅🤙🏼👊🏼
Practical demo please, prep & weld cast iron vise.
60k subs congratulations!
Thanks
Have you tried hooking up an Ln25 to the welder on the back of your truck
I tested for an inspector who hated bends, he says that you can leave so much slag in there and still pass, but you cant hade from a knick
How long did it take you to get your pipeline Cert? I'm looking to weld as a career when I'm out of highschool. I'm hoping to become a pipeline welder, and I'm trying to get an idea about the certs and how long it takes to get them.
The bench vice left the chat 😂
I am NOT a professional welder, just a DIY’r with a bit of exposure and experience. I was always told if a rod or Mig wire flux core weld uphill to keep flux from over running and interring with the filler material, tie in and porosity. Yet I see you welding downhill on the pipe. I’m sure different rods, material thickness, prep, weld machine amp settings and welder skills running downhill flux electrode can be accomplished. But is it actually something that would be generally accepted if a QA person were witnessing your weld on a critical weld.
Quick question Austin ross...where do you buy your caps?
Btw if your intentional dirty weld holds that well I would trust you any day!
Quick question don’t mean to b a bother but do you think taking a OSHA 10 or 30 is Beneficial for a welder starting off?
you have to repair that vice it put you where you are today use a brass rod to repair it oxy acetylene process then retire the vice on a table for light fabricating projects i love my vice and respect it
Got any ideas for a position pivotal pipe holder?
Were did you get your umbrella
What volumetric NDT I carried out on your test welds ? Surely by carrying out bend coupons only the areas specified for bending are known to be defect free
You need a Big Wilton on back that truck. They do not break. 👍
jf we just knew a guy that could weld that vice back together we would be good to go lol
Nice presentation.
When you get done making all the money in the world consider a teaching job.
👍
keep em coming :)
That looked an awful lot like a Harbor Freight pipe vise. And if you are telling me you got almost 9 years out of it doing pipeline and rig work you are well ahead. I bought the 6in Harbor Freight vise probably around the same time and am happily surprised it has survived and I haven't abused it anywhere near what yours has probably seen. Also for the HF vises, from what I have seen that mode of failure is the most common. You cant expect much more from a Chinese junk cast vise that only costs $80..
Were did you learn how to weld?
School ? Family? Self taught?
What kind of welding cap do you have on?
Can we see how you weld that vice? I also broke one a while ago, and would be a video about that
If it were possible to film, is there anyway you could show the difference between a dirty puddle in a clean puddle?
What cuttin nozzle is that please ?
What rod do you use
I got a question. Do welders have small heads or do i just have a huge head? Every time i look for a cap everything I find is to small.
Lol idk. I wear a 7 1-8”
6G do you have salute Lee have to learn how to weld left-handed or if Right handed you have to learn left-handed come on, keep them videos coming bro
Sometimes I think I weld pretty good, then I watch this man and realize I can’t weld at all
I wanna see you fix that vice. Can you weld cast?
06:48 - somebody should make a gif out of this part :D great music - what is it?
If you put high corrent on your welding machine ,,,,never have failure on your test