It worked. I don't know about you guys but we just did this in school and it worked. Our turbine spun. Wait for the fire to heat up the can until the surface is burnt. The steam will come out. Now, for the turbine, you need to have a nice looking turbine, and make sure that the bended parts are facing the steam. Then, use a glue gun to make the turbine stationary on the steel wire. *The one that will spun is actually not the turbine, but the steel wire.* We did this on one go.
Ok soo i looked into this and yes you can make this work BUT you would need a valve and a thin pipe and let it boild the water to make steam so this video is fake but if you add a valve it would work
@@itisinteresting8339 It's okay. Some people don't know what steam is I guess. Can I ask you though, wouldn't a paddle wheel design be more efficient than the fan blade design? I'm asking because I don't know if you tried that and found some issue with it that I might no be considering. Thank you
@@sumrando9203 I take it you were unaware that steam is an invisible gas. What you see when you see "steam" is actually condensed water vapor. In this case the rotation of the mechanism is causing too much turbulence for the tiny amount of condensed vapor to hang around in amounts large enough to be seen easily. It's perfectly reasonable for you to think that the visible stuff you see is the steam. Almost every time there is steam around we see it so that makes sense. An easy test that you can do at home... Put on a kettle of water and get it going really hot. Once the kettle gets to steaming really well take a closer look. There will be an invisible gap between the kettle outlet and where the "steam" can be seen.
@@goodcitizen3780 I know steam is an invisible gas, I build steam engines for a hobby. This model is bullshit, any steam would rapidly condense into visible water vapor, especially with this model being exposed to the air and a (supposed) self-cooling driver. There is no safety valve on the boiler (if it even works, I would be at a careful distance so that I wouldn't get hurt from the explosion), there is no emergency blowout valve, you need far more heat than a single candle to even generate a reliable source of steam, and I'm sure you didn't miss the absence of any "whistling" noise from the engine. It is a fake powered by a weak motor hot-glued to the back.
Thank you for watching !!!
Support me with your like and subscribe! ✔
I try to do my best for you!
Wtf bro its not working and spinning
I am sorry for the languidge, but this isn't steam engine.
It worked. I don't know about you guys but we just did this in school and it worked. Our turbine spun. Wait for the fire to heat up the can until the surface is burnt. The steam will come out. Now, for the turbine, you need to have a nice looking turbine, and make sure that the bended parts are facing the steam. Then, use a glue gun to make the turbine stationary on the steel wire. *The one that will spun is actually not the turbine, but the steel wire.* We did this on one go.
Could u please write the materials you used ?
I feel that would only last as long as there is a supply of fresh air feeding into the bottom of the other side of the can
The most difficult part is about hiding the batteries
You along with the people who liked your comment are the dumbest people on the planet earth
But wait, even to blow pressure the soda can's seal is not broke fully so how?
Make a steam seperator addition.
Can you give an explanations for this experiment?
Like how it works or..?
Thanks a lot..
Ok soo i looked into this and yes you can make this work BUT you would need a valve and a thin pipe and let it boild the water to make steam so this video is fake but if you add a valve it would work
I will subscribe just for your music, We'll make one of these today thank you my friend
did it work?
Was there even water in it ,oh and there was no hole up front
It’s a model, gonna work, but I think he’s blowing it
Challenge 2: MAKE IT GENERATE 0.5V OF POWER AHHHHHHHH
btw: the hardest thing was to hide the baterries
Make a geothermal energy working model
thank you
It is not working
Where is the steam?
He is not visible.
@@itisinteresting8339 Oh okay. That makes so much sense.
*"Sarcasm self test; Complete."*
@@itisinteresting8339
It's okay. Some people don't know what steam is I guess. Can I ask you though, wouldn't a paddle wheel design be more efficient than the fan blade design? I'm asking because I don't know if you tried that and found some issue with it that I might no be considering. Thank you
@@sumrando9203
I take it you were unaware that steam is an invisible gas.
What you see when you see "steam" is actually condensed water vapor. In this case the rotation of the mechanism is causing too much turbulence for the tiny amount of condensed vapor to hang around in amounts large enough to be seen easily. It's perfectly reasonable for you to think that the visible stuff you see is the steam. Almost every time there is steam around we see it so that makes sense. An easy test that you can do at home...
Put on a kettle of water and get it going really hot. Once the kettle gets to steaming really well take a closer look. There will be an invisible gap between the kettle outlet and where the "steam" can be seen.
@@goodcitizen3780 I know steam is an invisible gas, I build steam engines for a hobby. This model is bullshit, any steam would rapidly condense into visible water vapor, especially with this model being exposed to the air and a (supposed) self-cooling driver. There is no safety valve on the boiler (if it even works, I would be at a careful distance so that I wouldn't get hurt from the explosion), there is no emergency blowout valve, you need far more heat than a single candle to even generate a reliable source of steam, and I'm sure you didn't miss the absence of any "whistling" noise from the engine. It is a fake powered by a weak motor hot-glued to the back.
Doesn’t work
Phly bottle ko NACA la phir video start kana boring videos
Fake doesn't work do not try waste of time what the hell ☹️
Fake video
Whattttttttttt
ı think some fake video
Looks like that's not fake.
(Have you heard about science?)
Or maybe fake idk.
Not sure..
It's fake.
Doesn't work!!!
Why don't you try it yourself bitch?