I already decided for Saljan and thought i search the UA-cam to see if anyone else used it and if it works and your video showed me that it is a good buy. Thanks for uploading the video :)
Bro wtf i never knew u only had 31 subs super underrated thank you so much for this amazing video 🌹, i subbed to ur channel can't wait to see what u post next :)
I’m thinking about getting that one abs I believe it’s actually 98 inches. Is it too big? And do you think it’ll work with just legs? I’m hoping maybe a 5th leg will stabilize it.
Great video! I've been looking for a cheaper option as well from the Karlby. I'm curious, after a year and 2 months, have you noticed any bending from the Saljan?
Thanks, I just copied your style, bought the exact same materials from IKEA and Ebay. i really like what u did there, simple and beautiful. Did you painted the Cable Raceways?? if yes, how? because i want them to be black as yours.
Hey man, your aio is bad installed. You need to have rad above your pump becouse air always rise up. You can even put your rad tubes down to get lower noise.
Hi Isaac thanks for the video you have inspired me to make my own IKEA desk with saljan 72inch / 183x3.8 but did you do any cutting to the table top cause I recently measured it in my room and it is quite big
Hey, great build! How's the table holding up now? Any curve or sagging? I am thinking of making something similar. Would you recommend I do this or something different?
Where did you get your old desk? That looks like a good size for me. Also, does the Alex drawer on that one sit right up against the bottom of the desk to support it?
@@IsaacSetupConceptsyeah thats what im gonna try doing! i saw online some alex drawers with a 30 inch deep top with some overhang and it still looked good and felt more roomy. thanks!
Hey i was wondering how strong and durable this table top is cus i am thinking about making a desk set-up of my own but idk much about materials and what not
Hey man, hope you alive and well. I have a laminated oak tree effect Saljan kitchen island butcher block 70in by 42 in. Say again, you were able to stain that thing? Laminates dont absorb stain, no? What did you exactly do?
thanks for response :) I got a oak effect. I guess you picked the maple effect? I did not know I could of had this option. But its okay, I'll do with it, I carried that slab all by myself, into a SUV, lmaoo you should have seen me, a real ant. I'll do a mix of oak effect and black colors I guess. As for the Alex drawers, what height does it gives from floor to bottom part of your countertop? @@IsaacSetupConcepts
About 27 1/4, I got the oak effect too, but I wish my alex drawers are white instead of black, I think looks better on camera, anyways you choose the color that you like.
Hello! I honestly wish the gerton was just 5 inches longer! because in depth it is perfect! you can put whatever you want on the table and you still have room to put anything else. However, the saljan is fine! it has a good depth. Everything seems to be tighter but with enough room to fully move my arm when I'm playing Apex without hitting the keyboard or the PC case.
Clean setup, dude! I think I'll get the same saljan table. Do you think 4 legs will be enough in term of stability or I should get more? And what are the sizes of your monitors? TY
hey! sorry for the late response! I really recommend you to get at least 1 drawer system if you want a really stable desk. The saljan is pretty long desk! don't put only 4 legs, put 5 with 1 in the middle. If you put only 4 the desk can bend with time.😀
Thanks for this! How is the build quality on the top? I'm looking at getting 2 to build an L shaped desk, as i want better than the linnmon but can't quite afford the Karbly.
@@IsaacSetupConcepts awesome! Thanks for being literally the only youtuber to have something about this counter top, i wish more would look at it instead of advising to go either Linnmon if any form of budget or Karbly/gertron(or how ever the later is spelt) if you can afford them
Is there any wobble ? I have the same desk but not with Alex drawer and it wobbles :( thinking about replacing 2 legs for the drawer. Also did you just set the countertop on the drawer or screwed or Velcro it on etc? If not screwed or attached does it move around ? Thanks.
Hey whats up i was wondering how much weight does it hold because i am getting this and installing it as a floating desk, i would use it for 2 monitors and playing keyboard and mouse
hey! I'm not sure about the weight capacity! but 2 monitors, keyboard and mouse is not going to stress the table at all. I'm actually planning to put another 27" plus all the stuff that I already have. What I recommend you is somehow hidden put a support in the middle! 😀
Hi, yes can be a little wobbly with 2 legs on one side but not that crazy as 4 or 5 legs (I always recomend to put one more leg in the middle). But, what I did is that I put one Ikea Alex on each side and one leg in the middle and it desn't wobble anymore.
Can the 2nd monitor arm linked in description handle a vertical 27inch monitor and a 32 horizontal curve monitor if so is this the monitor arm for me ? I’ll appreciate it if you let me know 🙏💯I’m also planning on using this counter top with two Alexas drawers on each side and one stick in the middle for support like yours would it be okay ?
hi! yes true! I had ones! you can see my older video! hehehe! but I don't wanted to nail it in the back of the new table! ... that's why I changed to these that have a strong double contact tape.😀
hello, are you still using this countertop? how is the monitor arm? did it damage the table in any way? i really hope not, im planning on getting this countertop soon, and i have 2 clamp arms, one for the monitor and one for the laptop, so im quite skeptical when it comes to getting a tabletop
sorry for the very late reply ... I'm not using the saljan anymore. I'm using the gerton instead because is solid wood and doesn't need a middle leg. But the monitor arm doesn't damage the countertop, just don't tighten it too much.
hey man! huge fan of your content I'm looking into getting this desk but the space I have is a little small I'm thinking of cutting it down to maybe 70 to 68 inches is this desk cuttable
Hey! 😀 Not too much, I mean, I put a leg in the middle back and the drawer system on the right side, maybe that is why is not shaking like crazy! ... With adils legs only can be a bit unstable.
Isaac I need your help!😂😁. I was going to get gerton which is out of stock in my state, and the nearest ikea that has gerton is like a 15 hour drive. Maybe more. What tabletop do you recommend that is at least 55+ inches length and 28+ inches depth that is NOT paper
Hey! ok! you can get the saljan or the karlby (both particleboard) and cut it to makes it shorter, they come with extra laminate that you can glue in the end of the table, or you can get the MÅLSKYTT (particleboard) is 55" but just 23" depth. Also the ANFALLARE (bamboo). Do your research, I'm sure there is more. 😀
Hi! the brand is husky mounts! ... Here is the link (non affiliate link): www.amazon.com/gp/product/B0797HR1BW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 ... actually I think this item is discontinued! I bought it in 2018. Thanks!
Hey there, have you had any issues with the desk collapsing because of the monitor clamp? My current Ikea desks have collapsed from the pressure the monitor clamps put on the edges. I'm hoping this brand is a little thicker.
With the ikea saljan, the gerton and the ekbacken no issues at all. But I used to have a ikea linnmon and yes the desk started to collapse because is pretty much hollow inside. If you want an ikea desk, do not buy the linnmom buy something else.
@@IsaacSetupConcepts Thanks for your response. I ende dup calling Ikea and they had little cross-sections of the desks so i was able to see what's inside the Saljan and the Ekbacken. Those 2 were solid. I ended up getting the Ekbacken my self. Thanks again for the help.
There are a lot of same questions about this in the comments, he said it held up fine til this point and is as good as new. No bending or damage to the desk even with a monitor mount as long as you don’t tighten it too much. Hope this helped.
Hi, does the table mover at since its not drilled to the cabinets? did you add anything to it for it not to move? or is it just sitting on top of the cabinets?
Hi, I just stick furniture pads on top of the drawer system and the table is just sitting on it. It doesn't move at all because the countertop is heavy.
Hey! well I have only 2 weeks using the Saljan, I would say yes it is durable, is a particleboard very well done, I mean is not hollow by inside like the linnmon, this table is actually made for kitchen countertops and the laminate is very thick.
Hi, great video, are you still using this configuration with ikea saljan? Did it bend in the middle? Is it durable over time? Sorry for all this questions but i would like to buy it and i have lots of doubts
Is very durable, I've been using it for more than 2 years and is like new. Yes I actually install one legg in the middle for support, so It does not going to bents with time
I already decided for Saljan and thought i search the UA-cam to see if anyone else used it and if it works and your video showed me that it is a good buy. Thanks for uploading the video :)
no way 252 subscribers with this good of content.. algorithm brought me here, soon it will be 100,000 subs
thanks! I hope so too! 😃
Bruh 546
this is the best way to build a desk.
Can't thank you enough for the step by step instructions setting this up
THE MOST UNDERRATED CHANNEL
After my first failed attempt at making my own desk I thank you a lot for this video I'm basically gonna copy/paste it
Thanks for sharing and you have got a great setup there to kickstart the year of 2021. Happy New Year!
Thanks, you too!
extremely clean set up
Bro wtf i never knew u only had 31 subs super underrated thank you so much for this amazing video 🌹, i subbed to ur channel can't wait to see what u post next :)
Hey! thank you so much! I really appreciate that.😀
Good work. It’s basic and simple. Great way to create a new space for your pc set up…. I’m inspired! Thanks
What a nice video, just what I needed to make up my mind and go for the SALJAN when I do my own build :)
Hi, I am thinking of buying the Saljan. Do u like it?
@@LoranMaes it speaks for itself when you see it. Only gets better in person.
@@douglasascencio9140 What do you mean? Is it not good to use it as a desk?
@@LoranMaes sorry I wasn't clear. It's a great choice for a desk top. Feels great and makes being in the computer charmer. I recommend it as a desk :)
Wow that's way cheaper than the Karlby, nice alternative.
Indeed!😀
@@IsaacSetupConcepts thx was looking exactly like this one with 180cm x 60cm too bad there is no solid black color.
bro im thinking about getting this desk now, looks great. good job
really under rated channel! great videos man, :)
Awesome video. 43k views and not even 1k like.. why ??
It take only 1 second for 1 click to appreciate any video.
Screens look Beautiful 🤩 PC looks powerful. cool that you can see the inside of the case. 🖥🙂
Great job i picked up the sanjan marble 96x1/2 $69 on sale building my desk this week. Thanks for sharing.
That is awesome! Make a video! =) hehe! thanks!
I’m thinking about getting that one abs I believe it’s actually 98 inches. Is it too big? And do you think it’ll work with just legs? I’m hoping maybe a 5th leg will stabilize it.
@@alexangell903 to big dont do it
@@thenerdcomicbookco.est.1966 oh , you didn’t like it?
@@thenerdcomicbookco.est.1966 what issues did you have?
What a gamer with the LG and Dell monitors loll
LG monitors are fine. The one he's using has everything you'd want from a gaming monitor.
I love this. I'm trying to become a pro game streamer and I'm rebuilding my setup soon so this is helping a lot thank you! 😊
200th sub!
Great video mate
Thanks 👍😀
Awesome set up! Glad to see another DT 770 Pro user :)
Thanks! 👍 oh yes! great headphones! hehehe!
Great build
7:23 lol. So it's not just me putting the outlet switch upside down for power extender cable to go up to the desk not through the floor.
Nice desk setup!
hey! Thanks!😀
very cool video
Thanks for posting
just clean
Hello, thanks for showing us your set up, I wanted to know if with the time the desk bended
Your screen so beautiful 🤩.
Great video! I've been looking for a cheaper option as well from the Karlby. I'm curious, after a year and 2 months, have you noticed any bending from the Saljan?
I have 3 of these tables for a U shaped desk. You will need a leg in the center to keep it from bending because the inside is particle board.
@@stevecn70 I assumed that myself. I want to get it but have been debating.
Keep up the good work!
Thanks, will do!😃
nice video
Looks great! So The legs you put in were the same height as the set of draws?
hey! thanks! Yes they are the same height! Ikea make everything to fit perfectly! 😀
@@IsaacSetupConcepts thats so cool
Nice little build... where did that monitor mount come from?
Support should be at least 1/3 away from the back
what ploles did you use? Thanks great video!
You mean legs ?
IsaacTR
3 months ago
"hey! I used the ADILS legs from IKEA!😀
"
but isnt it 25 inches wide and alex drawers 27.5 inches wide?
What drill bit for pilot holes did ya use?
Thanks, I just copied your style, bought the exact same materials from IKEA and Ebay. i really like what u did there, simple and beautiful.
Did you painted the Cable Raceways?? if yes, how? because i want them to be black as yours.
you can get those cable raceways in black in amazon.
@@IsaacSetupConcepts yeap, ive got them
How did you make the Saljan stick on top of the Alex drawer? did you use some sort of adhesive?
thats a nice duo monitor table mount. where did you find that? thats nice
Hey man, your aio is bad installed. You need to have rad above your pump becouse air always rise up. You can even put your rad tubes down to get lower noise.
someone else told me that, I already fix it! thank you!
what are my options if i don't have enough room for such a wide counter top?
You can cut it and makes it fit into you room or you can se other options in the ikea website, there are plenty options.
Hi Isaac thanks for the video you have inspired me to make my own IKEA desk with saljan 72inch / 183x3.8 but did you do any cutting to the table top cause I recently measured it in my room and it is quite big
Thanks to you! ... yes it is big but, no I didn't cut the tabletop.
@@IsaacSetupConcepts also when you attached the legs did you use the IKEA drill bit or what size was the drill bit to put in the legs
Yes I used the Ikea drill bit, I think is 3mm.
Hey, great build!
How's the table holding up now? Any curve or sagging?
I am thinking of making something similar. Would you recommend I do this or something different?
its holding up very well, no sagging so far! ... if you can do a butcher block instead of the saljan, do it. Its much better.
Which size is this? Also planning a dual monitor setup with the SALJAN
Hi, nice build!! What's the name of the drawer that you are using? Thanks!
Ikea Alex😀
Where did you get your old desk? That looks like a good size for me. Also, does the Alex drawer on that one sit right up against the bottom of the desk to support it?
i kind of want to set up a combo desk/drawer like this but idk i want a bigger screen and 25 inch depth doesnt seem enough you know
25" Is not enough to be honest! Hehe! I would like to have a desk with more depth! ... get a desk with 30" at least you won't regret it.
@@IsaacSetupConceptsyeah thats what im gonna try doing! i saw online some alex drawers with a 30 inch deep top with some overhang and it still looked good and felt more roomy. thanks!
What kind of wood is it? As good as hardwood?
This is sick!! I like how you used the legs for support instead of 2 Alex drawers. What size drill bit did you use to drill the holes?
the drill bit that I used came with the IKEA Fixa, the size is 3mm.😀
Hey i was wondering how strong and durable this table top is cus i am thinking about making a desk set-up of my own but idk much about materials and what not
Neat
Hey cool video. How far do you drill into the table? Cheers
Hey thanks! Mmmmm About 1 inch or less!
Hos much depth did the previous table top have?
Can I put the pc above the IKEA ADILS legs instead of putting it above the drawer unit
Hey man, hope you alive and well. I have a laminated oak tree effect Saljan kitchen island butcher block 70in by 42 in. Say again, you were able to stain that thing? Laminates dont absorb stain, no? What did you exactly do?
Haha, I'm alive! ... no, laminate countertops don't absorb the stain. I didn't do anything, I'm using the saljan as it came.
thanks for response :) I got a oak effect. I guess you picked the maple effect? I did not know I could of had this option. But its okay, I'll do with it, I carried that slab all by myself, into a SUV, lmaoo you should have seen me, a real ant. I'll do a mix of oak effect and black colors I guess. As for the Alex drawers, what height does it gives from floor to bottom part of your countertop?
@@IsaacSetupConcepts
About 27 1/4, I got the oak effect too, but I wish my alex drawers are white instead of black, I think looks better on camera, anyways you choose the color that you like.
@@IsaacSetupConcepts turns out there are.transparebt tinted vinyls!
Did it bend bro ?
Hi, thanks for the helpful video. How do you like the 63 cm compared to 75 cm depth for the desk?
Hello! I honestly wish the gerton was just 5 inches longer! because in depth it is perfect! you can put whatever you want on the table and you still have room to put anything else. However, the saljan is fine! it has a good depth. Everything seems to be tighter but with enough room to fully move my arm when I'm playing Apex without hitting the keyboard or the PC case.
@@IsaacSetupConcepts ok thanks for reply 😊
Clean setup, dude! I think I'll get the same saljan table. Do you think 4 legs will be enough in term of stability or I should get more? And what are the sizes of your monitors? TY
what kind of legs are u getting , i am getting the same desk. Bummer they are out of drawers near me what about u?
hey! sorry for the late response! I really recommend you to get at least 1 drawer system if you want a really stable desk. The saljan is pretty long desk! don't put only 4 legs, put 5 with 1 in the middle. If you put only 4 the desk can bend with time.😀
@@IsaacSetupConcepts do I need to put 1 in the middle if I'm only putting my laptop on the table?
Wow nice vid. Btw whats the differences between the Saljan and Karlby?? Im about to buy one of those 2🥲
Thanks for this! How is the build quality on the top? I'm looking at getting 2 to build an L shaped desk, as i want better than the linnmon but can't quite afford the Karbly.
For the price! the saljan is excellent! sturdy, smooth surface, ready to used😀
@@IsaacSetupConcepts awesome! Thanks for being literally the only youtuber to have something about this counter top, i wish more would look at it instead of advising to go either Linnmon if any form of budget or Karbly/gertron(or how ever the later is spelt) if you can afford them
@@TheAverageNerd idk if you are still looking for any feedback. But I’ve ordered the 78in Lagkapten table top. I’ll let you know how it is 🙌🏾
Is there any wobble ? I have the same desk but not with Alex drawer and it wobbles :( thinking about replacing 2 legs for the drawer. Also did you just set the countertop on the drawer or screwed or Velcro it on etc? If not screwed or attached does it move around ? Thanks.
With the drawers the desk is pretty sturdy and I just put a piece of cloth between the desk and the drawer. 😀
Did you just let the countertop loose on the cabinet?
Yes, I put a cloth between, just to protect the cabinet from scratches!😃
i want to put a leg in the middle were you put the drillhole what are the measurements
What’s the name of you’re old table nice video btw!
The name is IKEA GERTON but unfortunately is discontinued.
@@IsaacSetupConcepts thanks!
Hey whats up i was wondering how much weight does it hold because i am getting this and installing it as a floating desk, i would use it for 2 monitors and playing keyboard and mouse
hey! I'm not sure about the weight capacity! but 2 monitors, keyboard and mouse is not going to stress the table at all. I'm actually planning to put another 27" plus all the stuff that I already have. What I recommend you is somehow hidden put a support in the middle! 😀
love you
holding well? im debating between getting this or the one of the more expensive ones.
hey! yes this tabletop is doing the job pretty well.
Is this real wood or carboard too like lagkapten?
Is particleboard, is not real wood but is solid, not hollow inside.
is that 3rd leg really necessary I just purchased this same setup but they only had 2 legs available .. would it hold?
hey! I would say YES! the saljan can sag with time without that middle support, I recommend you that you put a a leg in the middle! 🙂
Is it sturdy enough with with those 2 legs on the side, people say it’s wobbly on the legs side but not in the drawer, how’s is your?
Hi, yes can be a little wobbly with 2 legs on one side but not that crazy as 4 or 5 legs (I always recomend to put one more leg in the middle). But, what I did is that I put one Ikea Alex on each side and one leg in the middle and it desn't wobble anymore.
You think I can fé fine just with 3 adil legs and one Alex drawer. 2 on the side one in the middle (for the sag) and one Alex drawer
Hi! What drill bit did you use for the pilot holes in the countertop?
Hi, I used a 3mm drill bit.
@@IsaacSetupConcepts thanks dude!
4:54 howd you do that like mount the surge protector on under the desk?
Can the 2nd monitor arm linked in description handle a vertical 27inch monitor and a 32 horizontal curve monitor if so is this the monitor arm for me ? I’ll appreciate it if you let me know 🙏💯I’m also planning on using this counter top with two Alexas drawers on each side and one stick in the middle for support like yours would it be okay ?
I cheked on Amazon and yes can handle up to 32" monitor. And yes, with 2 Alex Drawers is excellent.😀
You could've used some J-shaped cable raceways. That way you don't need zip ties, to keep the cable raceways closed
hi! yes true! I had ones! you can see my older video! hehehe! but I don't wanted to nail it in the back of the new table! ... that's why I changed to these that have a strong double contact tape.😀
@@IsaacSetupConcepts They usually are attachable via adhesive tape ;)
Does it just go on is there any screws that put it on the desk?
hi what's the name of the discontinued 1st monitor arm?
What case is that? Btw you just saved me over $200 thank you
Thanks to you! Glad I could help!😀 The case is the Thermaltake Core P3
Hey man, any idea how much weight one of these can hold? Looking at the same thing.
Hey new to your YT I was just wondering about your table legs where did you get them? and what's it called. Thank you in advance :))
Hey! the legs are the ADILS from IKEA!😀
@@IsaacSetupConcepts thanks you!
@@IsaacSetupConcepts Are those legs adjustable? Cause the ones I see are 27" but the desk on top of Alex Drawers would make it taller.
hi...after 2 years, is it get bend without the leg at the center?
Did u have put anything on the Alex drawer before placing the saljan tabletop?
Hey! I Did yes! I put a cloth because that was the only thing that I had at the moment! but you can put some rubber pads.😀
hello, are you still using this countertop? how is the monitor arm? did it damage the table in any way?
i really hope not, im planning on getting this countertop soon, and i have 2 clamp arms, one for the monitor and one for the laptop, so im quite skeptical when it comes to getting a tabletop
sorry for the very late reply ... I'm not using the saljan anymore. I'm using the gerton instead because is solid wood and doesn't need a middle leg. But the monitor arm doesn't damage the countertop, just don't tighten it too much.
hey man! huge fan of your content I'm looking into getting this desk but the space I have is a little small I'm thinking of cutting it down to maybe 70 to 68 inches is this desk cuttable
Yes you can! The countertop actually comes with a piece of laminate for the ends of the table in case of you cut it! 😀
@@IsaacSetupConcepts oh sweet! Thanks for the info keep up the great work
Hi there, I wanna buy this table. Since you used Adil legs and Alex drawer unit, did you experience any sagging in this table yet?
Hey! 😀 Not too much, I mean, I put a leg in the middle back and the drawer system on the right side, maybe that is why is not shaking like crazy! ... With adils legs only can be a bit unstable.
@@IsaacSetupConcepts Alright, I see. Thanks for the help! I really like your videos, keep doing them
Isaac I need your help!😂😁. I was going to get gerton which is out of stock in my state, and the nearest ikea that has gerton is like a 15 hour drive. Maybe more. What tabletop do you recommend that is at least 55+ inches length and 28+ inches depth that is NOT paper
Hey! ok! you can get the saljan or the karlby (both particleboard) and cut it to makes it shorter, they come with extra laminate that you can glue in the end of the table, or you can get the MÅLSKYTT (particleboard) is 55" but just 23" depth. Also the ANFALLARE (bamboo). Do your research, I'm sure there is more. 😀
OK! Thank you.
What brand monitor mount is the first monitor mount you had? Link?
Hi! the brand is husky mounts! ... Here is the link (non affiliate link): www.amazon.com/gp/product/B0797HR1BW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 ... actually I think this item is discontinued! I bought it in 2018. Thanks!
Hey there, have you had any issues with the desk collapsing because of the monitor clamp? My current Ikea desks have collapsed from the pressure the monitor clamps put on the edges. I'm hoping this brand is a little thicker.
With the ikea saljan, the gerton and the ekbacken no issues at all. But I used to have a ikea linnmon and yes the desk started to collapse because is pretty much hollow inside. If you want an ikea desk, do not buy the linnmom buy something else.
@@IsaacSetupConcepts Thanks for your response. I ende dup calling Ikea and they had little cross-sections of the desks so i was able to see what's inside the Saljan and the Ekbacken. Those 2 were solid. I ended up getting the Ekbacken my self. Thanks again for the help.
How is it longterm any desk sag or anything?
There are a lot of same questions about this in the comments, he said it held up fine til this point and is as good as new. No bending or damage to the desk even with a monitor mount as long as you don’t tighten it too much. Hope this helped.
What is the wall board you originally had?
Will it work with just 4 legs and not one in the middle? And do you think it could be stained a darker color?
Yes! 4 legs works just fine, the only problem you may have is that can be very wobbly.
Hi, what size did you use in the video?
Hi, does the table mover at since its not drilled to the cabinets? did you add anything to it for it not to move? or is it just sitting on top of the cabinets?
Hi, I just stick furniture pads on top of the drawer system and the table is just sitting on it. It doesn't move at all because the countertop is heavy.
Can I replace Alex with Micke?
They are 72$ now
is this the saljan durable?
Hey! well I have only 2 weeks using the Saljan, I would say yes it is durable, is a particleboard very well done, I mean is not hollow by inside like the linnmon, this table is actually made for kitchen countertops and the laminate is very thick.
Hi, great video, are you still using this configuration with ikea saljan? Did it bend in the middle? Is it durable over time?
Sorry for all this questions but i would like to buy it and i have lots of doubts
Is very durable, I've been using it for more than 2 years and is like new. Yes I actually install one legg in the middle for support, so It does not going to bents with time
Do they have these countertops longer
Yes, they have one that is 98 inches.