This is a killer build! What a lot of people fail to realize that the e game is in its infancy. Automobiles weren't very good 10 years after they were invented either compared to what they are now. I'm just hoping for a breakthrough on battery tech that eventually becomes affordable I think battery weight is holding us back. I absolutely love me a V8 but electric going to be far superior after the growing pains.
I just skimmed through all your videos, very awesome to see your progression of different builds. Does it get any better than this though? This one looks like the dream!
YOOOOOO That is crazy! I've been hunting for a mondraker summum to do this exact setup but with the stealth gen 3. I'm glad to see someone put that battery in that frame I wanted to know how it would look and fit. Unfortunately I just can't find one my size on the used market and don't have the budget for a new one. Maybe one will come along!
👾1. If you use pedaling at what speed does it no longer make sense to pedal due to the speed of the motor? 2. On average, how long do cassettes and chains last before being damaged by stress for which they were not designed?
1. Depending on your set up you most likely won’t pedal at all. 2. Because it’s a mid drive it utilises all the gears on your bike but because it’s so powerful you can have problems with larger cassettes if you don’t use the gears properly but if your gears are tuned properly you should be fine
Just put the gen4 on my old iron horse sgs downhill bike last night!, upgraded from bafang with bac855. Didn't realize how jenky the bbshd is until I put the cyc on. the Bac 855 with bafang would cut out all the time. Like if I was going to the store which is a 1/2 mile away I would have to reboot the 855 6 times in a one mile stretch. The cyc can do full throttle and then let off completely and still doesn't cut out. I fucking love this motor! I'm using the stock x12 controller with dual batteries so I'm only getting peaks of 6000 watts. Even on the best day my bafang would only pull 2800.
Can you ride like this everyday without destroying the bike and motor. I run at 4.5kw and for my feeling more power would destroy the bike and the motor in the longterm. For this high power stuff i use my surron but this bike might be even faster than my stock sur ron
I put a thump throttle on the left hand side so I can still shift quick with my right thump without letting off. that have a shift sensor on cabel? Just curious. that thing looks crazy fun! even with dirt Ike background tje left hand thumb throttle wasn't hard to get used to
Bad ass I want that 😊 Was it cutting out from overheating? Wasn't sure where I wanted to place my throttle but after watching you. I think I'll put it right by the shifter.
Hi mate deadly build I would like to build my own version. Has the mid drive motor got controller built into it ?? I'm looking at at bike I might buy. 2017/2018 GT All mountain bike 27.5 would that suit this build??
Nice vid mate! First time Ive seen someone riding one of these that can actually ride!!! Have you had any problems with the CYC? I mostly just see videos of people having problems. You were really ripping on that thing, that was great!!
What chain and gears are you using? I have been looking at going single speed and BMX chain because anything over 3KW is just chewing up the gearset. Had to really lower the bottom end torque to stop it skipping constantly when trying to get any drive out of corners or from standing. Any tips?
I had loads of problems with chains dureallar and cassette in the beginning but now I found the right set up that won't destroy my chain and cassette I'm currently using cheap chain and cassette believe it or not but the trick here are to use good strong dureallar with clutch and chain tensioner I will do a follow up video soon and go through everything on this bike
@@Jack77169 Hi there, would a shimano xt deore derailleur with a clutch work fine with a 72v Cyc x1 pro gen 3 build in your opinion ? I see people everywhere complaining about that high of wattage snapping chains off and destroying casettes. Will that derailleur save me from that hastle ? My casette is shimano slx 11 speed. Also, can I ask you what throttle you're using ? Looks like a domino throttle.
Can the transmission hold up over time despite this phenomenal power? What can you say? How many Kilometers did you do without changing the transmission?
Hi , in the beginning I had alot of problems with the chains and dureallar and cassette I have found the right set up and now I have zero problem I can ride as hard as I want, I will do follow up video soon about my drive train
Hey man, is there anyway I can get your contact information? I’d like to know the right bike to purchase for battery frame space I just built a QS 138 v3 kx 100 but I’m bout to sell it and I’m gonna buy a CYC kit just want to know the right bike or how to get started on this type of build ur shit rocks man
Hello ! Your configuration is monstrous congratulations! I dream of going on the same project, frame and same battery to make you some videos of my weeling of death =D . Is it possible to know the price of the battery and the assembly approximately? I am French so sorry for the poor translation! Merci
I like the build but it's a shame you needed to lie about it's power output being 7200W. The motor is limited to 5000W and throughout the video it will never peak above 4996W on the display.
He's actually right, He's not using the X6, or the x12. He's using the old ASI BAC2000 Controller. , He is. also using the Gen2 motor , I have a friend that have the same setup up. I'm on his bike. And he is capable of doing 7000W
it aint 7200w bro. CYC X1 pro gen2 wont generate so much, 5000w is generated in CYC X1 Gen4 and it was released recently, btw your battery isnt generating so much power
What are you talking about? I custom made this battery myself it’s 72v with 100amps bms 72x100 = 7200w In this video I use bac2000 and I turn the power up to 7200w And for the gen 4 it actually pulll well over 6000w
How did you get 7200w out of the BAC2000? I ended up getting a nucular kit because I was under the impression you can't tune a BAC unless you buy straight from ASI
You can download cyc motor app for asi bac and get login from cyc. It's not that great because it only work on old phone. But you can play around power and setting
@@Jack77169 For sure. 👍 I'm not able to download it with a newer android and the cutout is an issue.. Sick setup though! Hope to see more videos like this. Once I finish my DH bike I want to start posting as well. Currently just running a beater DJ bike and an under spec'd 3kw peak battery lol
Looks like too much fun! Awesome build!
This is a killer build! What a lot of people fail to realize that the e game is in its infancy. Automobiles weren't very good 10 years after they were invented either compared to what they are now. I'm just hoping for a breakthrough on battery tech that eventually becomes affordable I think battery weight is holding us back. I absolutely love me a V8 but electric going to be far superior after the growing pains.
I just skimmed through all your videos, very awesome to see your progression of different builds. Does it get any better than this though? This one looks like the dream!
Haha yeah I love this bike , might have new projects on the way 🤫
YOOOOOO That is crazy! I've been hunting for a mondraker summum to do this exact setup but with the stealth gen 3. I'm glad to see someone put that battery in that frame I wanted to know how it would look and fit. Unfortunately I just can't find one my size on the used market and don't have the budget for a new one. Maybe one will come along!
Thanks man and yeah its hard to fine battery for this frame. So I had to build them myself
@@Jack77169 hi can u please give me the info on what kit you installed ❤❤❤❤❤❤❤❤❤❤
👾1. If you use pedaling at what speed does it no longer make sense to pedal due to the speed of the motor? 2. On average, how long do cassettes and chains last before being damaged by stress for which they were not designed?
1. Depending on your set up you most likely won’t pedal at all.
2. Because it’s a mid drive it utilises all the gears on your bike but because it’s so powerful you can have problems with larger cassettes if you don’t use the gears properly but if your gears are tuned properly you should be fine
Chain and casette killer
Gotta pay to play.
Chains and cassettes are cheap and easy to fix. Just have extras on hand.
@@A_A_Ron_Glol, they add up quickly
I have a 1x10 I imagine it will get destroyed but I will replace it if that happens with something much more durable....
Shimano LINKGLIDE 9 speed more durable for ebike
Just put the gen4 on my old iron horse sgs downhill bike last night!, upgraded from bafang with bac855. Didn't realize how jenky the bbshd is until I put the cyc on. the Bac 855 with bafang would cut out all the time. Like if I was going to the store which is a 1/2 mile away I would have to reboot the 855 6 times in a one mile stretch. The cyc can do full throttle and then let off completely and still doesn't cut out. I fucking love this motor! I'm using the stock x12 controller with dual batteries so I'm only getting peaks of 6000 watts. Even on the best day my bafang would only pull 2800.
Hi mate what gearing and kit is on this beast ❤❤❤❤❤❤❤❤
put your shifter on the left handlebar upside down works sweet with my BBSHD on 4.2kw
I'll give it a try thanks
Nice build man, could you let me know what model / amp rating BMS you used in the custom battery?
It's 72v 100a bms from ebay nothing special
got the 72 volt cyc kit would a 52 volt battery 20 amp work?
Amazing video bruv please post more your complete and utter legend 👍👍👍👍
total beast of a bike im selling my stealth bomber now and going mid drive
Can you ride like this everyday without destroying the bike and motor. I run at 4.5kw and for my feeling more power would destroy the bike and the motor in the longterm. For this high power stuff i use my surron but this bike might be even faster than my stock sur ron
Did you do any modifications to the drivetrain? Or can it just handle 7kw
How many batteries can be installed when a 52v battery (14s) is installed in the Mondraker bicycle battery location?
good power, but how long does the battery last ? 15 minutes or 20
I put a thump throttle on the left hand side so I can still shift quick with my right thump without letting off. that have a shift sensor on cabel? Just curious. that thing looks crazy fun! even with dirt Ike background tje left hand thumb throttle wasn't hard to get used to
How is it so fast?
Bad ass I want that 😊 Was it cutting out from overheating? Wasn't sure where I wanted to place my throttle but after watching you. I think I'll put it right by the shifter.
I have the same set up. What rear sprocket set up are you using?
How's the bike holding up? I just ordered the x1 pro gen 4. After watching this I have no regrets only buying a 50 amp battery 😄
Hey I wanted to know what you think of the mid drive. I am considering getting the same one next one for a mtb
How many metres does the chain and cassette last for? 😅
awesome build, how's the cassette/chain handling all this power?
Not great haha I have gone though many chains and cassettes but it’s part of the game they’re cheap anyway
What is the best chain you recommend?
you controller overheating ? maybe causing cut off?
Dónde lo compraste?😮
Hi mate deadly build I would like to build my own version. Has the mid drive motor got controller built into it ??
I'm looking at at bike I might buy. 2017/2018 GT All mountain bike 27.5 would that suit this build??
Would you get a sram axs setup on your incredible ebike?
top speed 80mph?
What are you using for controller and transmission?
Nice vid mate! First time Ive seen someone riding one of these that can actually ride!!! Have you had any problems with the CYC? I mostly just see videos of people having problems. You were really ripping on that thing, that was great!!
What chain and gears are you using? I have been looking at going single speed and BMX chain because anything over 3KW is just chewing up the gearset. Had to really lower the bottom end torque to stop it skipping constantly when trying to get any drive out of corners or from standing.
Any tips?
I had loads of problems with chains dureallar and cassette in the beginning but now I found the right set up that won't destroy my chain and cassette
I'm currently using cheap chain and cassette believe it or not but the trick here are to use good strong dureallar with clutch and chain tensioner
I will do a follow up video soon and go through everything on this bike
@@Jack77169 I will be watching out for it, might be the answer I need to save these cogs, if not I will be going BMX chain and fixie.
@@Jack77169 Hi there, would a shimano xt deore derailleur with a clutch work fine with a 72v Cyc x1 pro gen 3 build in your opinion ? I see people everywhere complaining about that high of wattage snapping chains off and destroying casettes. Will that derailleur save me from that hastle ? My casette is shimano slx 11 speed. Also, can I ask you what throttle you're using ? Looks like a domino throttle.
How u make it to 7200
100 amps through that thing! How's the motor doing?
What size are your Crank tooth on the ebike, both drivetrain and motor Crank teeth?
What chain did u use?
How fast would this bike go, insane build!
Im guessing 50+ mph
I might be missing it, but how did you get it to be 7200 watts
Where can I get a battery from I have the gen 2 cyc x1 pro 5000w please I'm in the uk and struggling.
I build the battery myself
what cells for the battery did you use and bms? I might want to do a build like this in the future.
I'm guessing samsung 40T in a 20S3P as that'll give you 105 continuous amps, or maybe molicel p42a for 90 continuous amps.
how many km you can do with aggresive ride?
Not many ill bet
Hey, Is it better to get the gen2 with the bac2000 instead of gen 3?
Hi , I don't think the bac2000 come with gen3 kit they only sell x6 controller with gen 3 I think
the constant shifting really grinds me gears...
any suggestions for a high end battery 72 volt? don’t want one that’s gonna shoot up in flames lol
Only custom. Everything else is varying degree of crap. Not only flame wise
beast bro !gimme full specs please add ons too inc hear shift cutoff thing .ill sell my stealth bomber amnd build one
Can the transmission hold up over time despite this phenomenal power? What can you say? How many Kilometers did you do without changing the transmission?
Hi , in the beginning I had alot of problems with the chains and dureallar and cassette
I have found the right set up and now I have zero problem I can ride as hard as I want, I will do follow up video soon about my drive train
@@Jack77169 Can you give us your secret? It might save us from making the same mistakes
Awsome mate love it
Dude, can u link all the stuff needed for this? I have got to build me one.
Had no Idea that they were this wicked haha
range?
What display is that
750c display
@@Jack771697000w going to kill this motor
Brilliant build....1 question, where did you buy the battery from.
I build them myself
@@Jack77169 Ahhh, well there's your next video then, how to build your battery 😆...
That looks like a lot of fun.
Hi there, your bike looks crazy fun! Was wondering if you could lend a hand with what bms you got for your battery (I’m new to this e-bike game)
Sorry for late reply, the bms was 72v 100amps I found on ebay nothing special. I will make another video and go through everything on this bike soon
@@Jack77169where is the video, I am patiently waiting! Love the ebike!!
We need more content 🔥
maybe childish but how is it to wheelie that thing
hell no thats what were after..... I want to do that!
All that torque is making the front tire kick up during acceleration,
Hey man, is there anyway I can get your contact information? I’d like to know the right bike to purchase for battery frame space I just built a QS 138 v3 kx 100 but I’m bout to sell it and I’m gonna buy a CYC kit just want to know the right bike or how to get started on this type of build ur shit rocks man
This machine comes fron the hell. Wow. Strong as f. It looks very funny
That would beat a stock surron any day!
Hello ! Your configuration is monstrous congratulations! I dream of going on the same project, frame and same battery to make you some videos of my weeling of death =D . Is it possible to know the price of the battery and the assembly approximately? I am French so sorry for the poor translation! Merci
Hi I build the battery myself, I can't remember exact price but all in all includes spot welder and nickle strip and bms I would say around £500
hello! from where did you got that acceleration? i have now a thumb throttle and i want to change it with full twist throttle
Hi its surron throttle from ebay
@@Jack77169ok thanks so much
@@Jack77169 one more question, how did you connect the wires? (what color to 5v, what color to ground and what color to signal)
pmsl downhill where, thats a fire road that looks near flat, fast bike though.
It's downhill bike , didn't say I was going downhill
lol, I just noticed no comma😁
Sounds like a drone haha.
i`m lovin it
Surron kill@r 😆😆🙆🏻♂️👍🏻💪🏻
fierce!
I like the build but it's a shame you needed to lie about it's power output being 7200W. The motor is limited to 5000W and throughout the video it will never peak above 4996W on the display.
He's actually right, He's not using the X6, or the x12. He's using the old ASI BAC2000 Controller.
, He is. also using the Gen2 motor , I have a friend that have the same setup up. I'm on his bike. And he is capable of doing 7000W
it aint 7200w bro. CYC X1 pro gen2 wont generate so much, 5000w is generated in CYC X1 Gen4 and it was released recently, btw your battery isnt generating so much power
What are you talking about?
I custom made this battery myself it’s 72v with 100amps bms
72x100 = 7200w
In this video I use bac2000 and I turn the power up to 7200w
And for the gen 4 it actually pulll well over 6000w
@@Jack77169so now remove bms it will become 20505W. (no)
I challenge your bike to a race ...
👍
You need a bigger battery bro
I’ve already build myself another battery, watch my latest video
How did you get 7200w out of the BAC2000? I ended up getting a nucular kit because I was under the impression you can't tune a BAC unless you buy straight from ASI
You can download cyc motor app for asi bac and get login from cyc. It's not that great because it only work on old phone. But you can play around power and setting
And also annoying cut out from bac2000. I wish I had different controller
@@Jack77169 For sure. 👍 I'm not able to download it with a newer android and the cutout is an issue.. Sick setup though! Hope to see more videos like this. Once I finish my DH bike I want to start posting as well. Currently just running a beater DJ bike and an under spec'd 3kw peak battery lol
Now riding tracks get dangerous! No more calm an fun!
That's not 7200 watts with that set up 😂😂😂😂😂😂
He is using a bac 2000 which pushes up to 8000w.
Get the x6 control upgrade no cutting out mate
That's not a bike. It's an electric motor cycle. Is it legal for those trails?
nice joke bro. nobody cares about legality
@@albertmonsieur7832You’ll find quite the opposite, actually. _A LOT_ of people care about legality. The majority of people, even.
@@babybirdhome nope. No one cares. It’s an electric toy
Get a life..
🥱🥱🫡
Buzz and half
Could you convert my bike please I'm serious and I'll pay
Where about are you ?
@Jack77169 London but travel anywhere
Or can I buy your bike or another one if you got any more
@@kcAnimeGamingBoxing I’m thinking about selling it mate once I pass my motorcycle test
I’m only about 1hour half away from London
Surron bike 😂
battery voltage and capacity?