🏆 How to Recover a Crashed RAID 5EE After Controller Failure or Multiple Disk Failure 🏆

Поділитися
Вставка
  • Опубліковано 30 вер 2024

КОМЕНТАРІ • 5

  • @HetmanRecovery
    @HetmanRecovery  3 роки тому +1

    👍 Watch this video to find out how to recover data from a RAID array after a controller failure.
    00:00​ - Intro
    01:25​ - How to create a RAID 5EE
    03:06​ - Replacing a failed disk and backing up
    05:29​ - How to recover data from a RAID array with a dead controller
    08:28​ - SATA expansion cards
    09:30​ - Recovering data in a case of dead controller and one hard disk
    10:28​ - Recovering data in a case of dead controller and two hard disks
    13:01​ - Conclusion

  • @aiakam80
    @aiakam80 2 роки тому

    I have an issue in PowerEdge R720 server with 11 SAS 300GB physical disks (2 RAID1 300 GB, 3 RAID5 600 GB, 5 RAID5 1.2TB, 1 GLOBAL HOTSPARE) both RAID 5 were degraded, I replaced physical disks and restored second RAID then during rebuilding the third RAID a drive failed (3 physical drives were predicted to fail) and RAID changed from degraded to Failed, all the data lost on this virtual drive and I had about 800 GB data, I tried to backup it before rebuilding but no use
    what shall i do to restore the data ?

  • @roganthoerson1909
    @roganthoerson1909 2 роки тому

    does this software runs on encrypted Red5 arrays in AES 256 bit ?
    Is it possible to plug the drives via USB docks?

  • @sgpood1026
    @sgpood1026 Рік тому

    can it recover equallogic raid?

    • @HetmanRecovery
      @HetmanRecovery  Рік тому

      Yes, Hetman RAID Recovery can recover data from EqualLogic RAID arrays. It supports various RAID configurations, including RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, and more. It can recover data from different RAID controller brands, including Dell, which is the manufacturer of EqualLogic RAID systems.