Wolverine MTW Inferno - chrono & test fire

Wolverine MTW Inferno Gen 2 10.5" with stock barrel, hopup chamber & bucking. Dwell is set for ~1.7 J with BLS 0.36g with hopup turned off.
Redline SFR reg at 90 PSI. 1000 PSI left in the tank after the test.
Hopup is at position 5.
The target is torso size mannequin at 53 meters / ~175 feet.
Outside temp: 8° C / 46° F
#WolverineMTW #InfernoGen2 #ShootingTest

[@joshturner9766]

nice editing on the scope

[@airsoftsniper9191]

For those temperatures change your hop up bucking (stock mtw bucking is inconsistent at low temps) , a good combo is maple leaf macaron 70° with maple leaf flat hop nub, stock barrel is fine, you should hit the torso at 53 meters every shot easy with 0.36g and 1.7j

[@NikolayDimitrovFisher]

70° is not so good in cold either. It's stiff. 50° or 60° with hard concave nub would be better.
I played with ML Super Macaron 70° in 4-5°C / 40°F - ua-cam.com/video/IpT6stVd5Ns/v-deo.html ... mediocre result...

[@butters2160]

What reg are you using I found my p* micro reg to be a little more consistent in fps

[@NikolayDimitrovFisher]

Redline SFR and MiniSFR. Rock solid operation even when you have less than 850 PSI left in tank (balanced reg) with very fast refresh ate.

[@sandrorenatomonteiro6092]

Are you still getting the same behavior? mine have the same behavior..some bbs goes too high.

[@NikolayDimitrovFisher]

No. It's much better now in terms of consistency and accuracy after I replaced the stock barrel with IR-hopped Lambda 6.05 and M-nub - ua-cam.com/video/Dm0EhwTvI_A/v-deo.html

[@BorelessAirsoft]

What have you done to improve accuracy?

[@NikolayDimitrovFisher]

Switched to Maple Leaf 6.01 GBB barrel + their hybrid 60° bucking and Omega concave nub. I'll post a new video as soon as I have a chance to test it. I expect similar accuracy - ua-cam.com/video/Pqunym9DIxQ/v-deo.html