I've tried all 7 methods and none of them solved my problem. After all I solve my problem using method #8. Method 8: Purchase a new USB flash drive and get a sledgehammer and beat the crap out of the old one. Quite satisfying after all.
Hi Dear I have Tried all the methods described by you in the video and none of them is worked for my Card, But one thing i would like to say that your efforts are appreciable.Thanks...
It simply means your SD card is damaged.... However your computer is still able to read what's inside it....I had an SD card which was completely damage to such a point where none of any device was able to even read it...It kept on saying disk corrupted...
Dude, why don't you make a video that works? you should rename the video as "7 Ways of "Unable" to Remove Write Protection from Pen Drive or SD"... Whadda waste of time!
There is only one way of solving this problem which is, when inserting the adaptor to the pot of the system, push it to the direction that has cut on the adaptor(push it to the lift side of the adaptor pot) as u finally insert it. That's all
@6:10 the value should be 0 not 1. I changed it to 0 and it fixed the issue. If you think about it, it’s a bit, so by setting it to 1, you are write protecting it.
I've tried other you tube videos on how to fix write protect they all explained it the same procedure which is not as complete as you've d explained it. Sometimes small details are important just like the one you showed to type exit after setting up cmd which is very important because it worked for me. Thank you so much for explaining it properly. I've liked your video and subscribed! Thanks again!
Thanks man. I was reading comments while completing instruction. After reading a few comments I actually got a heart break BUT the third one worked for me. Now here comes the fun part i.e you got a new subscriber!
Omg I did all the steps and when you got to the samsung SD adapter part. I was like omg I got the same one ! And then you showed that switch on and off and I was like *face palm* 😭 I shouldve watch the video through first lol haha
Amazing! thanx alot its really such a helpful video to fix this problem. through this video i have fixed the problem around 10 mins in one go. grateful buddy. Regards
I feel the same way. I tried the first two and was like F@#$ this. Then looked at the lock switch and the mother effer was locked. I just got rid of the adapter and it worked!! 😂🤣😂🤣
First method worked perfectly fine, although it was a micro sd, but somehow it was stuck with that attribute even if it doesn't have a physical button unlike the normal SD. I think the micro sd card got screwed by those adapters and even if i used the adapter with the button switched off, the protection wouldn't go away. That first method worked perfectly! Thanks!
It's very sad that none of your method works for me my usb is not showing in my computer while formatting it is showing i/o device error diskpart is also unable to format
None of your fixes worked for me I have a write protected sd card and I went to the folder with the files I wanted to delete and right clicked went to properties and in the general tab went down to read only and clicked on the box for read only to unselect it and hit apply it then came up with a box that said disk is write protected and I clicked on ignore seems to be working. Hope this helps.
The 4th step worked for me, i opened the app did the same as him but checked the box with quick format than hit the format button after it was done i went to the disk managment formated the usb to fat 32 and than clicked on changed the drive letter and paths then clicked on add: and then hit okay and apply and the usb is working again for me Thank you it worked for me😊
Hurray !!!! Thanks you sooo much sir.. THE THIRD METHOD WORKS REALLY. I thought that was the switch for preventing the card falling down. But Its not. Thanks again sir.. You got a new subscriber...
My sd card is same as you say, then i search how to fix protected sd card, i saw this. I try the 1st way, then settled my issue, thank for help and useful video for me 😊
Hello Tech Zaada, i am Francis from Malaysia. I would like to thank you for sharing this tips. It is really work! I follow the step on that regedit. Now my protected disk issue settled. As my appreciation, i already subscribe to your channel and like this video. I am not a tech guy, but you tutorial is clear and easy to follow and i made it finally. You really made my day. I can’t thank you enough. Please continue share informative tech tutorial and God Bless. ☺️
The easiest way to remove write protection from pen drive or SD card → bit.ly/3ybFQxa
I've tried all 7 methods and none of them solved my problem. After all I solve my problem using method #8. Method 8: Purchase a new USB flash drive and get a sledgehammer and beat the crap out of the old one. Quite satisfying after all.
you use the third one it works for every sd card .i too was worried but this 3 method help me out
@@Sasmitadas19750
Method 8 is much more satisfying though. You *must* try it try it sometime.
Duh
I would do that but I don’t have the money for a new one
🤣🤣 yeah 100% true . this video uploader said all the things available in other website
I read the comments before watching the video and that was my smartest save-time action
Fact
To mai kya karu
Nice bruh,your comment on the top
So am not wasting my time
Same here...😄😄
I've learnt to do the same with anything computer related.
this video should be called "7 ways of how I tried and failed to remove write protection from my drive, so if you have another way please tell me."
😂😂😂😂😂exactly
I am also 😢😢
Me too
True 🤣🤣🤣
absolutly
thank you sir the 2nd method worked and i can use my sd card once again.
OMG it worked ❤️❤️❤️❤️❤️❤️❤️ I love you
Hi Dear I have Tried all the methods described by you in the video and none of them is worked for my Card, But one thing i would like to say that your efforts are appreciable.Thanks...
It simply means your SD card is damaged.... However your computer is still able to read what's inside it....I had an SD card which was completely damage to such a point where none of any device was able to even read it...It kept on saying disk corrupted...
he couIdn't even remove write protection from his own pendrive then what is the sense of this video?
none of these methods are working for me.
any solutions? i got the same problem...
The first one worked for me
Same bro
3rd one you try it worked for me
truth is SD cards just fail eventually
Dude, why don't you make a video that works? you should rename the video as "7 Ways of "Unable" to Remove Write Protection from Pen Drive or SD"...
Whadda waste of time!
😂😂🤣🤣🤣
Lol right 😆
😆😅😂
I have to buy new one.. Nothing works.
Hahahahaha
I watched tons of videos trying to figure out how to do this. This is the only one that worked, thankyou!
Glad to hear that the video was helpful to you 😀
Which software helped you
I wasted my whole day trying your 7 ways.I put that memory on the stone and broke in to Atoms😁
😅😂😂😂🤣😂
There is only one way of solving this problem which is, when inserting the adaptor to the pot of the system, push it to the direction that has cut on the adaptor(push it to the lift side of the adaptor pot) as u finally insert it. That's all
same
@6:10 the value should be 0 not 1. I changed it to 0 and it fixed the issue. If you think about it, it’s a bit, so by setting it to 1, you are write protecting it.
Thanks for information
Hahaha, you watched too much porn sir. 12:44
hahaahahha
😂😂
I also noticed that 😂
hahahahahahhahahahahahhahahahhahaha............... ahahahahhahahahha
Right bro...
Bro u couldn't do it urself and even made a video out of it..i need this confidence
It worked.... It really did.. the 1st method worked for me... Thanks bro.. keep the good work 👍👍❤️❤️😍😍
The best video on the matter, I've watched over 10 different ones this worked
I've tried other you tube videos on how to fix write protect they all explained it the same procedure which is not as complete as you've d explained it. Sometimes small details are important just like the one you showed to type exit after setting up cmd which is very important because it worked for me. Thank you so much for explaining it properly. I've liked your video and subscribed! Thanks again!
second method worked for me. but the value should be '0" not "1". Thanks bro
people Try to set to 1 then save . and then change back to 0 . work for me.
@@asutoshgaud7240 not necessary
good job bro...keep it up but we r same still didn't found how to format it 😂😂
Same
1st method and it worked perfectly.thank you bro.keep going🥳
thank you.. it works for me...3rd method. GODBLESS
Thanks man. I was reading comments while completing instruction. After reading a few comments I actually got a heart break BUT the third one worked for me. Now here comes the fun part i.e you got a new subscriber!
Omg I did all the steps and when you got to the samsung SD adapter part. I was like omg I got the same one ! And then you showed that switch on and off and I was like *face palm* 😭 I shouldve watch the video through first lol haha
This is a really good tutorial even though it didnt work for me it was fun following your instructions. :)
6:52 it was actuaaaaaaly that easy thanaaaak u soo much
It worked, in the 2nd method, may Allah bless you 😊! Salaam from Uzbekistan 🇺🇿 💞
I watching failing to fix this problem like 7 times! Waste of time.
Tech Zaada is stupid ,, he just make money
Best guiding video . I tried the ways . It works for me . Also I appreciate your honesty and clarity regarding affiliate link.Thanks.
Great video bro, but you killed me @8:30 when you say 'This software suppose to format my files but it hasn't' i can feel anger there
lmao
Amazing! thanx alot its really such a helpful video to fix this problem. through this video i have fixed the problem around 10 mins in one go. grateful buddy.
Regards
Thanks bro finding solution from 3hrs now it completely 🙏🙏🙏❤
8:10 it already show format error occurred so why you were waiting for.
No matter I try it still not removing the write protect
I appreciate the help very much. Although I feel you should have started with the physical switch first hahaha
I feel the same way. I tried the first two and was like F@#$ this. Then looked at the lock switch and the mother effer was locked. I just got rid of the adapter and it worked!! 😂🤣😂🤣
This is a really good video but none of the methods worked for me😭
me toooo
Me three
Me four
Waste
Yes not working
Tq sir.. this video really help to solved my problem...my sd card can formated with the second method .. Thumbs up 👍🏻👍🏻👍🏻
It really worked ...
Thank you very much 😀
"I dont care about my files"
Cries on the inside
"you dont care"!
so why you have post your video?
thanks man ,did the first one and it worked like a bomb :)
also , you show your method perfectly
None not working for mi
it was the damn switch the whole time lol thank you for the video, actually really helped
thanks man number 2 did work for me keep the good content up
Thank you Tech Zaada. Third method worked for me
Well, the first one worked for me
You should include "That still doesn't work at all" in the title of this video as you displayed while using every single one of these ways.
I think the I/O problem means there is something broken inside the disk/drive it self (could be physical components inside)
yeah but how to fix it?
The data still can be play but can't delete it.
The 1st one worked for me, thanks Bhai!! BTW the wall paper is awesome 😎
The write protection button on the device worked for me. Thanks for the video.
13min 39sec of my daily routine gone.. Just like that! 😭😭😭
*Proceeds to do Step 1 & 2*
Sees Step 3
😤🤬
not any single method work
XD
then how on earth we can get rid of this write protection?
You might have performed something wrong... It worked in mine
the 1st one has worked to me
observe third method carefully and try
Physical method on SD card worked for me- Thanks for this video
it worked for me for an SD card. thank you, i almost lost my mind lol
I don't get this
@@musambonani9379 what dont you get, the guy in the video explains it simple...
none of them working for me
now what?
me to i try them all not working. wtf
Dont worry,next step hahaha
@RUSTY i bought two usbs and again is not working
Buy a new Flash Drive/ SD Card hahahahaha
First method worked perfectly fine, although it was a micro sd, but somehow it was stuck with that attribute even if it doesn't have a physical button unlike the normal SD.
I think the micro sd card got screwed by those adapters and even if i used the adapter with the button switched off, the protection wouldn't go away. That first method worked perfectly! Thanks!
First method its worked for me (Using CMD Command to Remove Write Protected from SD Card)
thanks alot
Bro u are the greatest life hacker man 😂😘😘 it actually worked...❤️❤️ Thank you man
It's very sad that none of your method works for me my usb is not showing in my computer while formatting it is showing i/o device error diskpart is also unable to format
Same here, the solution is we need to buy the new one 😁
@@argoismoyoaji6934 yes😂😂😂😂
finaly malvastyle solve my problem .... My Card Formate Successfully
i love that wallpaper!!!
vaibhav k no
Thanks!! MalvaStyle saved my drive!! I tried everything and this did the job!! :)
You are welcome!
the third method worked.. i felt so stupid for not knowing what the key on the adapter is used for. thanks alot
first you learn how to format then make video for others
U need to respect his efforts not fucking give your decisions
None of your fixes worked for me I have a write protected sd card and I went to the folder with the files I wanted to delete and right clicked went to properties and in the general tab went down to read only and clicked on the box for read only to unselect it and hit apply it then came up with a box that said disk is write protected and I clicked on ignore seems to be working. Hope this helps.
Did this procedure, but files still write protected.
Live tutorials of some failing to do wat they said they will accomplish! 🤣🤣🤣
The 4th step worked for me, i opened the app did the same as him but checked the box with quick format than hit the format button after it was done i went to the disk managment formated the usb to fat 32 and than clicked on changed the drive letter and paths then clicked on add: and then hit okay and apply and the usb is working again for me
Thank you it worked for me😊
Non of software doesn't works...But that button works for me.. Thanks bro..
He just showed his porn files 12:43
🤣🤣🤣🤣
Shay Sights Lmaooooo 12:44
just wanna say tq.... done sub
MalvaStyle USB Repair - worked in my case!
Very high quality and clear tutorial.
Thanks!)
THANKS BROTHER FINALLY YOU THE BOSS. 🥰🥰
Thank you brother, Being the Idiot I am I had the Switch on the SD card Switched to Lock.
Thanks Dude U Help me same problem face to me 2 lol
Hurray !!!! Thanks you sooo much sir.. THE THIRD METHOD WORKS REALLY. I thought that was the switch for preventing the card falling down. But Its not. Thanks again sir.. You got a new subscriber...
The first one worked for me. Thank you very much.
My sd card is same as you say, then i search how to fix protected sd card, i saw this. I try the 1st way, then settled my issue, thank for help and useful video for me 😊
Thanks so Much dude, Method 2 Worked Perfectly for me. I have Subscribed
Awesome video .
The 1st method worked.
Keep up
can't thank you enough the fourth one worked for me😍😍😍😍
The first one just solved my problem, thank you
Thanks a lot first method is enough for this problem.... thanks a lot brother
Thank you bro.Malva style helped in a second
Thank you very dude❤️ I just fixed my SD card from the first step❤️
The Method 3 worked for me. Thank You
Thank you. First method worked for me.
first method work perfectly thank god.and you ❤
Thank you so much, the 3rd option worked. Changing the physical bottom on my SD card.
I am definitely going to share it 😊
4th method was effective ,thanks man!
Finally that lock system had worked , thanks for your knowledge sharing
Thanks man. I was reading the comments while completing instruction. After reading a few comments I actually got it, it works blessed, up innit
This actually worked for me “registry editor” thank you so much
Hello Tech Zaada, i am Francis from Malaysia. I would like to thank you for sharing this tips. It is really work! I follow the step on that regedit. Now my protected disk issue settled. As my appreciation, i already subscribe to your channel and like this video. I am not a tech guy, but you tutorial is clear and easy to follow and i made it finally. You really made my day. I can’t thank you enough. Please continue share informative tech tutorial and God Bless. ☺️
Belle vidéo tu m'as sauvé mon disque dur de 20to un très grand merci
Physical switch worked for me! Thank you :)
First method worked
Thanks bro 👍
Thank you very much, first step worked like a charm.
My cmd didn't work.....I've 6 other ways to go. Pray for me guys. 😉
Thanks very much my brother the third one works for me, I really appreciate, I have subscribed already, thanks
Thanks Sir by using these Method I am able to format my pd thanks again
Thank you. The first method works for me!
The first and 2nd method worked. Thanks a lot dude!
Thank you soooooo much option 2 worked for me.. i'm really grateful
Dear Sir,
I found You Video Very Helpful, Thank You.
Glad to hear that 🤗