SiriMoto W Brace Install - 10th Gen Civic - 2016 2017 2018 2019 2020 2021 Honda Civic
Вставка
- Опубліковано 6 лют 2025
- It's here, the suspension part all you 10th Gen owners have been waiting for! For more detailed information on this SiriMoto W Brace and/or to purchase one, check out our product page here: www.procivic.co...
This video goes through the steps needed to install a SiriMoto Phase 2 W-Brace on a 10th Generation 2017 Honda Civic Si.
Key Features of this SiriMoto Phase 2 Subframe Brace:
Signature W-Brace Design.
Made from lightweight extruded aluminum clamshell bars for maximum strength.
Improves the rigidity and stiffness of your vehicle's subframe.
Includes necessary hardware for installation.
Tested for improved handling characteristics.
Promotes greater suspension performance.
Furthers handling precision and road feel.
Fits:
10th Gen Honda Civics
Site: www.procivic.com
Reviews: trustpilot.com...
Videos: / procivicvideo
Instagram: / procivic
Facebook: / goprocivic
IMPORTANT SAFETY DISCLAIMER: When working on your car, always follow proper safety procedures. This includes, but is not limited to, letting your car cool down, using the correct tools and protection, jacking/lifting your car correctly, and in general being careful about what you are doing. If you do not feel confident doing something, do not attempt it! Instead, have someone else with more experience try or hire a professional. PRO Car Studio cannot be held responsible for any incidental or direct damages, injuries, or additional costs caused by installing any of the parts featured in our videos.
For more detailed information on this SiriMoto Phase 2 Subframe Brace and/or to purchase one, check out our product page here: www.procivic.com/p/m/civic/sirimoto-phase-2-subframe-brace.html?+phase+2+subframe+brace
For everyone in the comment section that dont know where the hardware goes (I didn’t know till I spent 10 min figuring it out)
The head of the supplied bolt goes through the small hole underneath the under tray, you then mock the w brace up and apply some horizontal pressure so that you can start threading the supplied nut on without the bolt just spinning. Once you got them on the bolt (don’t tighten yet) you then reinstall the subframe bolt that was already on your car. Tighten everything down and your done. Should’ve been an easy 15 min job that took me about 30😅🥲
The nut was a 15mm
The oem subframe bolt was a 17mm
@b__tr _ if you have any questions
P.s I agree that this video didn’t help much
I was so lost lmfao
I'm somewhat interested in this but worried about how low it hangs underneath. Most all other braces go under the splash shield. How often does it hit things? Speed bumps or curbs etc
Honda Civic channel! Awesome and precise vids
Dude I love this product but I can’t go over bumps anymore or else I’ll scrape bad, or bottom out on it lol definitely works on cornering tho. Think I might just put it on when I hit the track and take it off for daily use
Does this really that low? Or did you lower you car already? Now I’m worried, I’m stock car of course
@@chengzhong5342 I’m pretty low but the subframe brace does sit a little low. But if you’re stock height you should be fine. Just don’t go over bumps hard lol
I’d like those, but roads in my area usually suck all season
+Taro McArthur If your car isn't too low, you shouldn't have too much of an issue with clearance. But if the roads are that bad, it would be best to be cautious.
How do u install supply hardware???
How do you install the supplied hardware??
I have the front siri moto strut 10th gen I ordered from pro civic. I was thingking if this rear strut would also fit in 2018 honda civic sport hatch.
The brace shown in this video is for the front lower. We current;y don't have a rear strut bar, but do have sub-frame links to help. See the link provided for details: www.procivic.com/p/ym/2018/civic/sirimoto-phase-2-subframe-brace.html?ctid=3776&+phase+2+subframe+brace+alvin&app_selected=41875
Thoroughly lost ... there are only 2 bolts ? Do I have to take off the bottom cover like I am changing oil? If I am using the 2 bolts already on the car, where do the other 2 bolts go that comes with. This install video seems pretty worthless because it's to incomplete.
will this fit on coupes also?
Yes, this part will fit the coupe.
and this fits the 2017 hatchback sport correct?
+Anttillo Yes, this part will also fit the Hatchback models. Please see our site for other parts that fit your civic: www.procivic.com/c/ym/2017/civic/suspension.html?ctid=3224
Can you not do this install on a lift ? Since you suggest to use a jack to support the weight when you remove the subframe bolts ?I have a 2 piston garage jack and 2 stands... I'm not sure how to do this with what I have
+Josh Kessler The equipment you have is more than enough to do this job. The lift we have is a floor lift, which will simulate the car lifted on 4 jack stands. In your case, simply lift the front as much as you can safely and put the jack stands to hold it up. You'll have enough room to work with at this point and the jack should be free to help you hold the subframe while you do the work.
OK great! I'll give it a shot this weekend, I already bought the part, but was just waiting to go use a lift. Thanks for your support! Your videos are amazing!
So it worked out , as far as getting under the car.. However, I drilled the holes and placed the W brace under to mark the places to cut and realized that the part I had doesn't fit my car. I have contacted procivic.com to see what my next steps are. Hoping that I just got a wrong part :\ But the holes definitely didn't line up, about an inch off. I have a 2018 civic sport hatchback touring. Are the W brace's different sizes for hatchback vs sedan vs coupe ? Expecting to hear back from procivic on Monday.
So yeah the part fits, procivic.com explained to me that the hole you use for the bolt is underneath the tray, so you can't see it until you cut it out.
+Josh Kessler Glad to hear our customer service was able to help you get it installed!
Did you guys test it at the track? any before and after?
We have definitely taken it to the track! However, we do not have before and after videos or times. Sorry about that!
Did you notice any significant change on the stiffness?
Any suspension for the 2017 si?
+jfm041789 Unfortunately, not as of yet. The suspension is a bit different on the si due to the auto shock adjustment. Due to this, we are not sure when or if something will be released soon.
PRO Car Studio there is a company called "scale" that it's working on them.
Could you make a video about this topic?
+jfm041789 Unfortunately, we are not familiar with nor do we carry this brand. I cannot confirm if we can make a video on the subject, but I will still bring it up to the crew.
Does it need to be removed to access service points?
+hondatrix It'll depend on what needs to be serviced, but for standard maintenance (such as oil changes), it does not need to be removed.