OK, so im not exactly ripping, and my equipment sucks big time, but I hope you can still tell how bad ass these mufflers sound. They might be my new favorites.
We had 18" Porters on the ol' '48 Plymouth Coupe...Eveyone always asked what mufflers we was runnin... and they do get better...others burn out, these burn in...🫠🎃
I think the exhaust system looks great and it sounds great but honestly I feel any kind of muffler would sound good because of your engine. I always ran just the long tube headers and short mufflers with the dumps. Now that I'm older I Still like my exhaust loud! 😂🤣😂
Sounds great, to me it's like splitting hairs, I really like the round dynomax ultraflo and the race bullets. It would be nice if you could do a run down of the engine, size, compression, cam specs, cylinder heads, etc. And also the transmission and rear gear. Most of the guys watching this already know but for the newbies or younger guys who don't just simply putting these on a V8 doesn't mean it will sound exactly like this, The more "built" an engine is especially something with high or higher compression will always make your exhaust note sound better. The best sounding cars IMHO are the ones with higher compression.
@@sneakypete129Thanks for the specs, yes tight LSA is where it's at, also helps with low speed power. I noticed your California plate, is E85 readily available out there? Here in Indiana E85 is everywhere, obviously there is corn everywhere. Some guys around here regularly run as high as 14:1 on their hot rod, sounds amazing too. I saw some E85 yesterday for $2.87 a gallon. Right now in Brown County, 'War in the Woods' is happening, if you don't know about it, google it. Fun times!
I'm running true dual exhaust on my 82 Dodge d150 short bed truck with cherry bomb Vortex mufflers with turn downs just infront of the rear tires . sounds so much better then pipe out the back to the bumper. it got rid of the glass pack popping cackling sound under acceleration . did the same with Slowmaster 40 series . Your sounds awsome
Hey buddy, been watching videos, thanks for alll the advice on mufflers cause it’s helped me. Do you have a hanger on the end of the mufflers too? I don’t see one. Do you have any issues putting the muffler on the end without a hanger to help support it? I change mufflers often so I’m looking for a way to hang exhaust and be able to change mufflers fairly quickly. I also plan on running dumps so that’s not a big deal.
I left a comment on your last video where you tried the tailpipes and forgot to say that I made a plate perforated with holes inside the pipe right after the hollowed out mufflers that hold several stainless steel scouring pads. Nice sounding and I can add a couple more to quite it down if I wanted to.
Strangely the system makes the engine sound like a very small cube car. I thought this was a 265 or a 283 at best until I read its a 355... not many base notes here. Your dumped exhaust video sounded more aggressive and 'basey'. Anyway I like the car and the channel. Subbed.
That is one of the baddest '57 Chevy's I've seen recently. I love it! The Porter's do sound great too! I have heard a lot of good about them but haven't ran them on anything yet. I just bought a pair of Brockman Mellotone steel packs for my shoebox Ford with a stock flathead. Really excited to hear how they sound! Have you ever ran just Purple Hornies straight from the collector? I am debating on doing that with my '55 once I have the 408 Cleveland in it for longer street drives.
@@danielsavedra4358 I think the pipe diameter plays a bigger role than the muffler to be honest. A 3" system with the oval ultraflows, or a msgnaflow produces a very nice deep rumble, and offers the best overall performance.
@@nickshores166 I think I like them both about the same, they both sound amazing, but I think the Porters have a sound that fits this particular car a little bit better. I think the overall idle sound goes to the round ultraflows though.
Hated it love the dumps but those mufflers give it a european v6 the first uphill shot ,but a vw low end grunt note when it starts coming at camera on last one Purple hornie's or flowmasters for chevy for me
You can probably get away with all of that noise on a smog exempt vehicle. I don’t want to draw too much attention to all of the stuff that may be missing on my 1980.
Hey buddy, been watching videos, thanks for alll the advice on mufflers cause it’s helped me. Do you have a hanger on the end of the mufflers too? I don’t see one. Do you have any issues putting the muffler on the end without a hanger to help support it? I change mufflers often so I’m looking for a way to hang exhaust and be able to change mufflers fairly quickly. I also plan on running dumps so that’s not a big deal.
OK, so im not exactly ripping, and my equipment sucks big time, but I hope you can still tell how bad ass these mufflers sound. They might be my new favorites.
The Porter is it for the authentic sound. You have it sounding just like I remember them as a kid .
I had not heard of these mufflers before. I was surprised at how much I enjoy the way they sound. Great video.
I have the 3" Porter's, the more you run them the better they sound.
Hey just subbed youve got a bad ass 210! It will be a few years till i work on my 57 210 but your videos give some great inspiration
@@V8N8T Right on man, thanks!. Inspiration is a main goal with this channel.
I'm really liking the sound of those!
Love everything about that car. Kudos brother.
those mufflers sound great, never heard of them. nice clean work under the car by the way.
I like the sound of the porters
Well Tbh they sound great behind that motor of yours, sounds real good nice and healthy!! 😎
We had 18" Porters on the ol' '48 Plymouth Coupe...Eveyone always asked what mufflers we was runnin... and they do get better...others burn out, these burn in...🫠🎃
Yep my faves so far 👍🏻
I don't like to tell pipes.I love the dumps
I like the dumping prohibited sign...
Even the city don't like the dumps 😂
This sound is amazing...damn sweet
I love it!! I just got my self 150 57 2 door post😎 Nice to see some inspiration👉👌
Bring back the Original Thrush straight through. Those sounded badass!
Never heard of them..
But boy do i like the sound...btw like dumps also. 3" spin tech,s dump at axel.
Bloody beautiful mate.
I think the exhaust system looks great and it sounds great but honestly I feel any kind of muffler would sound good because of your engine. I always ran just the long tube headers and short mufflers with the dumps. Now that I'm older I Still like my exhaust loud! 😂🤣😂
I run thise on my 67 Deville, with 429 caddy big block, very nice
Don't worry about what others say. You do you!
Sounds great, to me it's like splitting hairs, I really like the round dynomax ultraflo and the race bullets. It would be nice if you could do a run down of the engine, size, compression, cam specs, cylinder heads, etc. And also the transmission and rear gear. Most of the guys watching this already know but for the newbies or younger guys who don't just simply putting these on a V8 doesn't mean it will sound exactly like this, The more "built" an engine is especially something with high or higher compression will always make your exhaust note sound better. The best sounding cars IMHO are the ones with higher compression.
The engine specs are in the video description but I will add the trans and gears to it. That's a good call.
@@sneakypete129Thanks for the specs, yes tight LSA is where it's at, also helps with low speed power. I noticed your California plate, is E85 readily available out there? Here in Indiana E85 is everywhere, obviously there is corn everywhere. Some guys around here regularly run as high as 14:1 on their hot rod, sounds amazing too. I saw some E85 yesterday for $2.87 a gallon. Right now in Brown County, 'War in the Woods' is happening, if you don't know about it, google it. Fun times!
My favorite car on UA-cam.
My 77 firebird had turn downs ...I loved it ....for a few weeks. Then after a few months I took them out lol. They sound great on other peoples car.
The sound the car it’s all Badassery
Sounds fantastic
I liked the turn downs when I was younger. I'm almost old ,so I like a little more quite now.
I'm running true dual exhaust on my 82 Dodge d150 short bed truck with cherry bomb Vortex mufflers with turn downs just infront of the rear tires . sounds so much better then pipe out the back to the bumper. it got rid of the glass pack popping cackling sound under acceleration . did the same with Slowmaster 40 series . Your sounds awsome
They sound pretty good, and that car would be really cool with a matching hood.
@@terrypikaart4394 I have the hood I just haven't got around to cutting it yet.
Thanks a lot for getting me addicted to these videos. Sheesh. 😂
I love that car, Bro
Yeah. That works.
Sounds like a marching band snare line coming through the tunnel
What’s the rear wheel and tire size looks awsome
I have 3 inch one chamber Flowmaster race mufflers on my 55 and my nova they're badass
Sounds great...
Hey buddy, been watching videos, thanks for alll the advice on mufflers cause it’s helped me. Do you have a hanger on the end of the mufflers too? I don’t see one. Do you have any issues putting the muffler on the end without a hanger to help support it? I change mufflers often so I’m looking for a way to hang exhaust and be able to change mufflers fairly quickly. I also plan on running dumps so that’s not a big deal.
Sounds good 👍🏻
Awesome car!
I left a comment on your last video where you tried the tailpipes and forgot to say that I made a plate perforated with holes inside the pipe right after the hollowed out mufflers that hold several stainless steel scouring pads. Nice sounding and I can add a couple more to quite it down if I wanted to.
Strangely the system makes the engine sound like a very small cube car. I thought this was a 265 or a 283 at best until I read its a 355... not many base notes here. Your dumped exhaust video sounded more aggressive and 'basey'. Anyway I like the car and the channel. Subbed.
Rowdy AF
That is one of the baddest '57 Chevy's I've seen recently. I love it! The Porter's do sound great too! I have heard a lot of good about them but haven't ran them on anything yet. I just bought a pair of Brockman Mellotone steel packs for my shoebox Ford with a stock flathead. Really excited to hear how they sound!
Have you ever ran just Purple Hornies straight from the collector? I am debating on doing that with my '55 once I have the 408 Cleveland in it for longer street drives.
@@FordMaverickFanatic I've never ran the purple hornies but shoot they might end up on this car for a test at some point.
It sounds great with the Porters, but with as much cam and compression that thing has, anything’s gonna sound good 👍
Ohhh crap! Original Purple Hornies were the S..t back in my day. They sounded So good! " Loud" 😂
What are the specs on this cam. I couldn't find a 30129017 on the Lunati website. Your 355 sounds awesome!
It was a typo, my bad, the number is 30120917. Thanks for catching that, I will fix it in all the vids.
@sneakypete129 Wow, instant reply! Thanks! Man this thing sounds and looks great. You need a tag on it with head knocker, Foreigner song.
Hey i have a big street cam big block in my 1975 nova I race with cut offs ,,but witch mufflers make the deepest tone to sound deepest??👌
@@danielsavedra4358 I think the pipe diameter plays a bigger role than the muffler to be honest. A 3" system with the oval ultraflows, or a msgnaflow produces a very nice deep rumble, and offers the best overall performance.
Did you feel any power loss up top? Cause the specs say from the 2 1/4 muffler to 3" are all 2'' internally.
Nothing noticeable no.
@@sneakypete129 Right on!
Sounds great to me but I am an older mechanic
Do you like these more than the round ultra flo's you had in the tail pipe video?
@@nickshores166 I think I like them both about the same, they both sound amazing, but I think the Porters have a sound that fits this particular car a little bit better. I think the overall idle sound goes to the round ultraflows though.
Hated it love the dumps but those mufflers give it a european v6 the first uphill shot ,but a vw low end grunt note when it starts coming at camera on last one
Purple hornie's or flowmasters for chevy for me
I really need for you to drive it on the jack stands to tell🎉😂
Not near as loud as i thought it'd be, not a fan of super loud obnoxious street cars, they sound pretty good!👍😁👍💯
Sounds just like open headers only different 😂
Are the Porter’s as load as Dynomax Race Bullets?
@@MrsSunshine75 They are quieter then bullets. Bullets are just a touch quieter than running straight pipe with no muffler at all.
sounds like a h pipe 🔥🔥🔥
You can probably get away with all of that noise on a smog exempt vehicle. I don’t want to draw too much attention to all of the stuff that may be missing on my 1980.
Hey buddy, been watching videos, thanks for alll the advice on mufflers cause it’s helped me. Do you have a hanger on the end of the mufflers too? I don’t see one. Do you have any issues putting the muffler on the end without a hanger to help support it? I change mufflers often so I’m looking for a way to hang exhaust and be able to change mufflers fairly quickly. I also plan on running dumps so that’s not a big deal.
@@westonbyng1314 I run a hanger to the pipe just before the muffler. Hangers are Walker Exhaust 36516. Very rigid, the mufflers do not move at all.