Tilling Our Garden w/ Earthquake Pioneer Tiller

Поділитися
Вставка
  • Опубліковано 22 тра 2021
  • Please Like 👍, Comment, & SUBSCRIBE! ✔️
    My wife's channel - / thissweetsouthernlife
    Camera Tripod. amzn.to/2I0cQP2
    Phone Mount for Tripod. amzn.to/2I8XkQw
    The best sun hat ever. amzn.to/3gv5AX9
    Minnow Trap. amzn.to/3lbjalr
    WORX Trivac 3-in-1. amzn.to/2I9J3n5
    Irwin Quick Grip Clamps. amzn.to/2IaklTh
    **Purchasing through these amazon affiliate links won’t cost you any extra but it might put a little change in our pocket.
    Thanks for your support!
  • Розваги

КОМЕНТАРІ • 34

  • @danpatrick5414
    @danpatrick5414 4 місяці тому +2

    Check the air filter and make sure its not leaking air around the filter (most popular cause of engine rev). Then could be a bad fuel to air mix problem so you might want to check and make sure your choke is adjusted right for what the engine needs to run smooth. There is a mechanism in the crank case area that makes minor adjustments to carburetor air flow to actually prevent surges but if something is blocking it from working correctly (bad oil or debris in the crank case can cause it to not function properly. Normally not an issue with new motors). When you start the engine you want to set the accelerator mid way with full choke. As soon as the engine starts running, reduce choke for smooth running. Once the engine has been running for a while you make want to check the choke is fully off so it won't burn fuel so fast. With the small tank on this tiller it will run out of fuel pretty quick. Hope this helps.

  • @ourgardeningadventure
    @ourgardeningadventure Рік тому +2

    Enjoyed your video. Sounded like Dale Jr. Doing a gardening show. I just got this same tiller and looking forward to getting it running.

  • @billybradyjr6008
    @billybradyjr6008 Рік тому +1

    Those tines look like there spinning way faster than my Troybilt crt.

  • @dennisdelk4298
    @dennisdelk4298 3 роки тому +7

    Thanks for the video. I really enjoyed it. Sounds like the carburetor needs a small adjustment. On some of the new stuff there isn't an adjustment screw. If it has one I'd adjust it in small turns.

    • @LifeOnTheRidge
      @LifeOnTheRidge  3 роки тому +2

      Appreciate the tip! I’ll check into it. Thanks for watching

  • @chrisyerp174
    @chrisyerp174 Рік тому +1

    That surging is the is most likely the the throttle body flap opening and closing few causes cap for tank vacume breaker issue , second is air ratio to Fuel mixture on the carb need adjustment I don't own this model but all engines work on this principal great video brother your little guy ready to work with his dad good stuff bud 👍

  • @ToddAnderson-wy3yc
    @ToddAnderson-wy3yc 3 місяці тому +1

    i think the surge is in the design my dads troy built was the same way is the govener on the carb thats making the surge

  • @mikeharris2985
    @mikeharris2985 4 місяці тому +1

    Sometimes there’s a fuel jet that may causes surging. Look up what causes an engine to surge more likely they will say it’s a jet that needs cleaning.

  • @kimmiles3071
    @kimmiles3071 4 місяці тому +1

    Id say new plug and always premium gas I want one of these so bad I like it I like it

  • @donnastormer9652
    @donnastormer9652 8 місяців тому +1

    I loved my earthquake pioneer until the carburetor went bad three years after I bought it. I’m in Florida so I use my tiller all season all year. I’ve been waiting for six months for a new carburetor. The company said they’re from China and they can’t get them. They also said the carburetor on that motor doesn’t last that long which I can attest to only three years and I serviced it well did everything right. The carburetors only gonna be $23 when they come in and I’ll buy three extra ones but the problem is my $900 tiller has been sitting here for six months not being usable which makes it useless so I’m looking for a common motor on a common tiller, no more weird named motors for me anymore!

  • @billybass6419
    @billybass6419 3 місяці тому

    I think the float is sticking. Mine did that and I tapped it with a screw driver handle.

  • @YourLocalCountryBoy23
    @YourLocalCountryBoy23 9 місяців тому +1

    When I was using 1 I was like hmm lil different but I cranked it about as many times as you did and it started up bout died so I reved it a bit and it sounded better than that one smoother anyway but I tilled up some black berry vines it did pretty good a 2nd trip would've fixed it probably

  • @sbri733
    @sbri733 3 роки тому +2

    Is very good

  • @calebarcher9974
    @calebarcher9974 3 роки тому +1

    I’ve had one since March and I’ve used it a ton only real issue I’ve fond it at this point both belts have stretched so much it isn’t really useable I’m probably going to have to get ahold of earthquake to get new belts. Otherwise it’s done a decent job. Didn’t break ground as good as I wanted so I had it plowed and disked up first but other than that does pretty dang good.

  • @kennethlowe6337
    @kennethlowe6337 Рік тому

    Put about a cup of Berryman's B 12 in every tank of gas it'll cleanup the fuel system. 👍🇺🇸

  • @rickmatz4456
    @rickmatz4456 Рік тому

    If it has a load needle with a spring. Adjust until it smooths our.

  • @robnremtp
    @robnremtp 3 роки тому

    My troybilt did the same thing with the surging and it had a issue with the float in the carb. Had trash or something in it.

    • @LifeOnTheRidge
      @LifeOnTheRidge  3 роки тому

      Glad to know I'm not the only one that's had this issue. Appreciate you watching!

  • @mdj1990
    @mdj1990 3 роки тому +1

    I got lazy and didn’t use stabil in one of my mowers before putting it away for the winter last year, same issue. Old gas maybe?

    • @LifeOnTheRidge
      @LifeOnTheRidge  3 роки тому +1

      It’s brand new but I could have gotten some bad gas. Some have suggested tinkering with carb adjustments. I may try that and see if that works

  • @donniecrawford4755
    @donniecrawford4755 2 роки тому +3

    its the governo needs ajusted it will stop the surging

  • @user-yp1bu8jm7n
    @user-yp1bu8jm7n 11 місяців тому

    I had a tiller like that a few years ago, and it work like a champ and one day the engine blew up right there on the spot and it still sitting on the very spot it died I just work around it

    • @LifeOnTheRidge
      @LifeOnTheRidge  11 місяців тому

      Hate yours blew up! I’m hoping I’ll have a little better luck…time will tell. Thanks for watching!!

  • @JoseLuna-gc9fn
    @JoseLuna-gc9fn Рік тому

    Se ve muy bien me gusta pero esta muy cara

  • @thisismyrifl3346
    @thisismyrifl3346 2 роки тому +1

    your not working the engine hard enough that's why it's surging. also when your cutting fresh ground you should be in counter rotation mode.

  • @pbryant1360
    @pbryant1360 Рік тому

    Consider a bcs.

  • @BruceSommers
    @BruceSommers 3 роки тому

    It’s probably a carburetor issue

  • @cashncoffee
    @cashncoffee 2 роки тому +1

    Adjust Governer

  • @williamgalloway7262
    @williamgalloway7262 2 роки тому

    caburetor is dirty but seems to do a good job. Stay away from ethenol in this thing

    • @LifeOnTheRidge
      @LifeOnTheRidge  2 роки тому

      Ethanol free is the way to go for sure!! Appreciate you watching