Programming an LED to flash with micro:bit and the Keyestudio Sensor Shield.
Вставка
- Опубліковано 17 лис 2021
- A basic tutorial explaining how you can use the Keyestudio Sensor Shield V2 and a micro:bit to control an LED.
You will need a micro:bit and a Keyestudio 37 in 1 Starter Kit.
Full details of the 37 in 1 Starter Kit, as well as the project description and a schematic diagram can be found at the link below:
wiki.keyestudio.com/KS0361(KS...
The specific project is "7.2 Project 2: LED Blink".
You can purchase the 37 in 1 starter kit here:
www.keyestudio.com/products/n...
You may want to watch these videos too:
Programming an LED to 'breathe' with micro bit and the Keyestudio Sensor Shield: • Programming an LED to ...
Programming a Digital Buzzer with micro:bit and the Keyestudio Sensor Shield: • Programming a Digital ...
Programming a Passive Buzzer to play music with micro:bit and the Keyestudio Sensor Shield:
• Programming a Passive ...
Programming a RGB LED to flash different colours on a loop using the Keyestudio Sensor Shield:
• Programming a Passive ...
Programming your micro:bit to switch image when a Digital Push Button is pressed.
• Programming your micro...
Using a Capacitive Touch Sensor with your Micro:bit:
• Using a Capacitive Tou... - Фільми й анімація