Spray Foam Insulation in my 30x40 Shop!
Вставка
- Опубліковано 13 тра 2020
- Finally had to do it. 6" Open Cell Spray Foam Insulation added to the shop. Will for sure help out with sound, and air conditioning. Ended up waiting a year or so to make sure everything was in its place and now I can get to finishing it.
Thank you guys for the support and watching! - Авто та транспорт
It’s looking good, definitely the way to good .
That’s the way to go, looks great !
You didn’t mention the cost!?
Wish we could build buildings like that one on the coast. That would blow away in my area.
Looks great!! Now u can make more videos!!!
I would paint the foam walls to try and stop moisture from reaching the metal. Disregard if you are in a climate that doesn’t freeze.
Actually those roll up doors are made in uninsulated & insulated models ....You can up-grade at construction time & anytime after construction . Also, they make inexpensive automatics door openers for them too that are user /owner install friendly ...👍
New to this spray foam stuff I have a shop 30x40 vented soffit and the roof has a 2” vent how do you spray that? Tin roof
Thanks for the video. How much did this set u back?
$3,200 for the Foam and Ceiling Paint
Did you use a moisture barrier behind the spray foam?
If you don’t mind sharing, who was it that you used to do your spray foam? I’m in Groesbeck Texas
What was cost of the building? I'm located in Ben Wheeler and this size is what I'm looking for.
The shop shell was here when I bought it. I did the interior. I can reference the spray guy I used if you wanna go that far
What kind of lights are those? I'm looking!
Barrina from Amazon
Where are you located I would like to see about you doing some work on my rzr 800 if you are close by
how many gallons of paint did the ceiling take
Roughly 8 Gallons
That is nice! If u dont mind answering what did that cost?
@sly dankass with fiberglass or spray foam? It's nearly $1.50 a board foot for diy spray foam @ 1in :/
Everyone in the comment section.. question.. why do you think people have such a hard time, or reluctant to share their cost?
I've mentioned it in the comments. Prices vary so much on location, company, and time that it's kind of irrelevant. Some say I wouldn't do it for less that 5k, while others brothers cousins great grandpa would do it for $750. Just leads to unnecessary comments.. it was $3,200 for Foam and Ceiling Paint.
@@Solitude313that's true but it gives some people an 💡 idea of what projects cost..
What did it cost for the 30x40 garage?
$3,200 for the Foam and Ceiling Paint
There’s an easy way to insulate those doors. At my work there’s just some reflective insulation and the door still rolls up fine
What was the cost
$3,200 with Spray and Ceiling Painted.
You should be weary of using open cell foam on metal substrates
Why is that, I haveing a metal building built now and thinking on spay foam in the next 3/ or 4 months after I do my wiring.
@@glenwoolsey4698 depending on climate zone it can cause issues. Open cell allows vapor to pass through it whereas closed cell foam is a vapor barrier at a depth of around 1-2" depending on mfg. I only spray closed cell to metal because of the risk of water vapor passing through open cell and condensing against metal. And when you have water, metal, and oxygen bad things can happen.
Spray foam is awful