DUMBORC X10F & TRAXXAS TQ 6519 TESTED ON THE MT12

#mt12 #traxxas #dumborc The X10F 10-channel receiver from DumboRC and the TQ 6519 receiver from Traxxas tested on the Radiomaster MT12.
If you like my work, please hit the like and subscribe buttons and feel free to buy me a coffee:
www.buymeacoff...

[@RecreationAutomotiveGarage]

For dumbo rc RX youll need to set ch8 output to be able to control the gain on gyro

[@jesseharless24]

Woo-hoo I helped with the traxxas info on fb lol. This is James tire guyy.

[@arminrc]

Ah, cool! Thanks again for the info. After I red your comment on fb I checked the official documentation for the Traxxas TQ protocol on the multi-module.org website. And, well, there is all the info you need! 😉

[@jammyhires4598]

Thank you this helped on the Traxxas. Can you do one on the Arrma groms.

[@arminrc]

Thanks, but I am afraid I can't help you with the Groms since I do not own one or such receiver.

[@NC-FPV]

i have dumborc x6dcg
can it connect to my jp4in1 MT12 ?
and how ?

[@viki7110]

I was setting up my x10f on my new truck and found that ch9 is on ch15 on the radiomaster and ch10 is on ch16

[@arminrc]

Thanks for the Info!

[@viki7110]

@arminrc do you maybe know how to get the battery voltage from the x10f to display on MT12?

[@arminrc]

@viki7110 Sorry, but I am afraid I can't help you on this. I do not have this Rx anymore. If the X10F has built in telemetry and the DumboRC sub-protocol on the MT12 supports telemetry then it should be possible. Have you performed a search for available sensors on the MT12 telemetry page?

[@viki7110]

@arminrc yes I did, but nothing came up. Will do some more research online. Your videos are very educational, thank you.

[@viki7110]

Great video, what reciver have you tested that have most amount of channels that works with the MT12?

[@arminrc]

Thanks! The X10F was the Rx with the most channels but this Rx does not give you a signal strength indication (RSSI). The Rx with RSSI I used with most channels were the Radiolink R7FG and R8FG.

[@espressomatic]

@@arminrc I don't think any DumboRC products have telemetry at all. They are Rx-only, not Rx/Tx (transceivers) like the Radiolink branded versions (which have a +/- tele port)

[@chrissirex]

It doesn't work with the TQI # 6533 with Telemetrie. Do you have any idea ? I don't understand it.

[@arminrc]

As far as I know only the Traxxas Rx shown in the video is currently supported.

[@fulltang1]

Does this mean that the mt12 will work with the dumborc x4fg?

[@arminrc]

If it uses the same protocol, maybe yes. I haven't tested it so I can't say for sure.