What about when the mixer audio randomly drops out? I haven’t changed anything in my setup or my computer in 4 years. The master volume vue meters will show no output, but the decks are still playing and showing on the individual deck vue meters. To fix, I have to turn it off/on and it works fine. Only happens once in a blue moon.
Hey I hope you can help ppl me. I'm an old school dj. I brought this mixer used. It worked ok at first. But now I can only get 1 channel to give output at a time. I can hear them both in the cue. Any tips?
Can anyone help. I reconnected my Rane and I cannot get the left table audio to work. Its not the table cause I can hear when I switch the cables over to the left side. Per the disconnect I hadn't changed any of the setting from when it was working. The audio meter displays a reading fo rthe audio, but no sound. Thanks
This helped me alot thank you very much I was about to lose it with the cross fader cause I'm coming off a Ns7 and came to a rane mixer for better cuts and it was worse lol till I calibrated the fader like you did in the video I love it now
(Fader Re-Calibration): I set all faders on mine are to the 6th line which I feel is the Middle for both the Up/Cross. I am getting 3 flashes. This is the first time I believe this has happened in my history of owning this mixer. I got it when it first came out and take extremely good care of all my gear. Still works fine other than some "new bleed" I am noticing on the Crossfade from the right side. Something I am missing/doing wrong/other alternatives to fix the 3 flashes? Thanks!
My Rane Sixty-Two mixer does not start up. In Serato DJ screen, there is an orange bar at the bottom of the screen that flashes "Rane Sixty-Two hardware connecting. This can take up to one minute." None of the lights on the mixer are lit when the power button is turned on. The only light that is on is a blue LED light at the back of the mixer. I tried to reset the default factory firmware with the FlexFX buttons pressed while powering on the mixer but it simply won't do anything. I reinstalled Serato DJ version 1.9.0, and then the software said on the right side of the screen, "Rane Sixto-Two detected. Update Driver." So I updated the driver and it required a PC system restart. The results are still the same and I still see the same message "Rane Sixty-Two hardware connecting. This can take up to one minute." Help???
DJ Menace Dennis Maldonado this happen to me like 2 weeks ago as I just bought my rane and it was my software I downgraded to El Capitan and everything works perfect now hope this helps you
Thank you for this!!! My right channel wasn't putting out any sound, and I wasn't sure what was going on. This worked!!
Bro… You just saved me $$. I didn’t have audio coming out of any outputs. Did this reset and I now have audio. Thank you.
What about when the mixer audio randomly drops out? I haven’t changed anything in my setup or my computer in 4 years. The master volume vue meters will show no output, but the decks are still playing and showing on the individual deck vue meters.
To fix, I have to turn it off/on and it works fine. Only happens once in a blue moon.
i have my sixty-four rane and i would like the faders to raise the linear volume and bad open it is already at maximum volume, how to solve?
Hey I hope you can help ppl me.
I'm an old school dj. I brought this mixer used. It worked ok at first. But now I can only get 1 channel to give output at a time. I can hear them both in the cue.
Any tips?
You guys ever get around to fixing the windows 10 problem?
Can anyone help. I reconnected my Rane and I cannot get the left table audio to work. Its not the table cause I can hear when I switch the cables over to the left side. Per the disconnect I hadn't changed any of the setting from when it was working. The audio meter displays a reading fo rthe audio, but no sound. Thanks
hi, the effects work in real vinyls or cd players?
I just tried the fader reset method as shown in this video and my cue 1 and cue 2 buttons didn't flash at all. Please advise?
sampler not working with new software, help please?
This helped me alot thank you very much I was about to lose it with the cross fader cause I'm coming off a Ns7 and came to a rane mixer for better cuts and it was worse lol till I calibrated the fader like you did in the video I love it now
(Fader Re-Calibration): I set all faders on mine are to the 6th line which I feel is the Middle for both the Up/Cross. I am getting 3 flashes. This is the first time I believe this has happened in my history of owning this mixer. I got it when it first came out and take extremely good care of all my gear. Still works fine other than some "new bleed" I am noticing on the Crossfade from the right side. Something I am missing/doing wrong/other alternatives to fix the 3 flashes? Thanks!
My Rane Sixty-Two mixer does not start up. In Serato DJ screen, there is an orange bar at the bottom of the screen that flashes "Rane Sixty-Two hardware connecting. This can take up to one minute." None of the lights on the mixer are lit when the power button is turned on. The only light that is on is a blue LED light at the back of the mixer. I tried to reset the default factory firmware with the FlexFX buttons pressed while powering on the mixer but it simply won't do anything. I reinstalled Serato DJ version 1.9.0, and then the software said on the right side of the screen, "Rane Sixto-Two detected. Update Driver." So I updated the driver and it required a PC system restart. The results are still the same and I still see the same message "Rane Sixty-Two hardware connecting. This can take up to one minute." Help???
Michael Cabrera I'm having this same issue as well!
Were you able to fix your issue?
DJ Menace Dennis Maldonado this happen to me like 2 weeks ago as I just bought my rane and it was my software I downgraded to El Capitan and everything works perfect now hope this helps you
Hi
I have the same problem , how did you solve it?
Thanks a lot
Awesome
Thank you