Excelente video, muy didáctico,se agradecería mucho subtítulos en español, gracias por compartir sus conocimientos,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)
This guy is an incredible welder excellent job brother wow great skill level demonstrated in this video I have my TSSA flat & horizontal certification at the moment and I'm working towards stainless flux core with gas
Now i have seen a few Videos about Mig Welding. Videos that were Filmed in the US. In every Video you Guys tuned the Mig Machines with Voltage and Wire Speed but not on Current. Im from Germany and all the Mig Machines I know are tuned on Amperage and Wire Speed. Quality Machines also have a Voltage Tuner, but only for controlling the Length of your Arc. At mine cheap chinese One, I set the Wire Thickness, Current and Wire Speed is automatic. I can also Tune the Voltage a bit for Arc Control.
Whenever you stop, grind the stop clean, then start from there (make sure you fuse well). I always grind my tie ins very lightly, and if it looks good, i just buff it.
@@Ruben901 do you just point it at the ground spot and start welding or is it like the way you do with stick welding where in you trace the ground area? Thanks bro
В иностранных проектах частенько корень варят TIG, а заполнение покрытыми или как в этом случае порошковой проволокой. Считается что корень чище выполненной сваркой TIG
👇WeldTube Store👇
www.weldlife.com
This guy should host more episodes lol love the energy and vulgarity 🤘
He definitely reminds me of a bunch of welders I work with 😂
Definitely lol I’d love to work with this one.
I love how he yall showed the frustration of having a fat spark land on you.
Excelente video, muy didáctico,se agradecería mucho subtítulos en español, gracias por compartir sus conocimientos,un saludo cordial y por supuesto un gran like desde Narón, Galicia (España)
I liked the quarter turn lenght wise slag you removed on minute 14:38 never seen it before. 👌
This guy is an incredible welder excellent job brother wow great skill level demonstrated in this video I have my TSSA flat & horizontal certification at the moment and I'm working towards stainless flux core with gas
Thank you for sharing your knowledge. 👍
Nice welding.. I like this
Killer work dude and having fun at the same time 👊🏻
Very impressive,nice weld thanks for sharing great jobs.
Tig/Flux combo, is common now on shops.
Yeah man..i like it better than mig/flux, for position welds at least..roll out mig and flux 🍻
@@brandonhernandez9260
I cant mig weld a root to save my life, only tig and stick roots 😁
Definitely need a few seconds post flow to shield the tungsten after weld termination.
Yeah he gave some bad advice there. Hence why you see smoke come out of the torch when he terminates his welds.
Agree
Very good videos . Very informative
Good luck for you
What's the name of that folding stool he is leaning on ?
👌👊!!! Thanks guys!!! Nice job!!!
Where do I buy those stools
Great video!
Now i have seen a few Videos about Mig Welding. Videos that were Filmed in the US. In every Video you Guys tuned the Mig Machines with Voltage and Wire Speed but not on Current.
Im from Germany and all the Mig Machines I know are tuned on Amperage and Wire Speed. Quality Machines also have a Voltage Tuner, but only for controlling the Length of your Arc.
At mine cheap chinese One, I set the Wire Thickness, Current and Wire Speed is automatic. I can also Tune the Voltage a bit for Arc Control.
That’s Batman at SCWA gettting into them tight SPOTS!!!
Nice video , but where did you get the small retractable chair. I've bin looking for something like that?
Go to Lowes or Home Depot in the garden area they are just garden stools
@@justinwilson09 thx i will do.
Should we dance too?
3rd Nd love the vids it really helps out in my welding school 💯
What dose nd stand for?
Same here
@@phoenixdelgado4700 and, some people just don't put the a for some reason
Very very good
Nice weld, hey can you do a 6gr demo?
I think they did one already
@@Ruben901 yeah yeah but instead of the 2” pipe, the one that is 6” heavy wall whit the plate 🪐 7018 all the way up
Ya era tiempo que subieran
How do you do tie-ins on flux-cored?
Whenever you stop, grind the stop clean, then start from there (make sure you fuse well). I always grind my tie ins very lightly, and if it looks good, i just buff it.
@@Ruben901 do you just point it at the ground spot and start welding or is it like the way you do with stick welding where in you trace the ground area? Thanks bro
What the point of having a mask if you’re not using it
@@westhappenin
Why in the world are you asking me that question?
@@richelleseradoy9998
The way i do it, i like to start slightly back from the ground spot, just slightly, but not too much where it builds up
Nice!!!!!
Like that shit , awesome...
www.everlastgenerators.com/?rfsn=4826594.123eab
Everlast Lighting MTS 275
nice bead
👏🏿👏🏿
Show us a 6gr with flux
👏👏👏👍👍👍🍺🍺🍺
Too cool for school 🤨
Lol at 13:00 minutes 🤣
Show do brasil faz videos em português ou pelomenos com legendas em português
First 💪🏽👨🏽🏭
En español latino
Just grind that shit down
Grind what?
@@Ruben901😮
ㅡ.ㅡ
Я бы эту трубу сварил покрытым электродом и не стал бы тратить оргон на корень шва.
В иностранных проектах частенько корень варят TIG, а заполнение покрытыми или как в этом случае порошковой проволокой. Считается что корень чище выполненной сваркой TIG
@@МихаилБодеев-ч9ч Согласен, но если это будет с потдувом, но я не об этом, просто тратить аргон на чернуху. Я понимаю нержавейку задувать или титан.
Fluxcore doesn't dig dude. Its hot but doesn't dig.