I own this Bouble Bell spring action for nearly four years. If you are considering purchase, i urge you to keep in mind that the Bolt Assembly is the first thing that is going to break few months in. The stock Bolt Assembly is made out of extremelly cheap pressed alloy and some rubbish plastic. Please use safety glasses when operating this gun, or the rear plastic part of the Bolt Assembly just might fly into your face. When you purchase this Airsoft rifle, it is worth considering buying a spare Bolt Assembly, or alternatively, look for a full metal version, which are way more reliable, as they are not made out of crappy alloy anymore. Otherwise the gun is built solid (i own full wood stock), but is more of a wall decoration, as it really underperforms (peaking at 150-160 FPS using .20 BBs), spring upgrade is possible, but to do that i have to say you have to do it on full metal bolt assembly, stock version won't survive the tension. Scope installation is possible as well, but as in most WWII sniper rifles, you will have to load each bullet separately (this airsoft rifle supports stripper clips).
What version do you have? You said get the full metal version, and all I see when I look up is full metal. Was there a plastic bolt instead of a metal one?
@@Glottymocrappa I have a standard full wood stock version, with optional full metal bolt assembly, the stock assembly, that comed with the gun default, is unbelievably crap. If you buy this airsoft gun, i reccommend buying full metal bolt assembly separately. If you plan to use it only as a fun wall decoration, you dont need to.
The black pieces that came on the bolt (the long one and the round one) either fell off or broke when putting the bolt in. Is this going to be an issue? The bolt itself moves fine. The gun wont shoot, but it might simply need gas? Im really not sure about much of any of this.
Cześć, posiadam ten karabin i mam z nim mały problem, otóż gdy próbuję zamknąć komorę bez łusek w środku karabinu to nie da sie do końca popchnąć w dół (zamknąć) natomiast gdy łuski są w środku to wszystko działa bez problemu, wiecie co może być nie tak?
@@KrakmanTaiwanGun thank you for the quick response! I figured out the issue eventually. Was just screwed in too far over, found the little push button and screwed it on the right way.
I might not get an answer on this question but I have the plastic spring version of this gun and I was wondering if anyone knew if it's possible to put a gas bolt on it instead
Hey so I have my Kar98k DB for about a month and so far it's been great. Today I tried to clean the bolt and magazine as there was a little bit of dirt on them. Before I put it all back together I properly lubed it with silicon oil. The issue is that now the bolt handle won't go all the way down when on empty magazine. With shells it works fine, but as soon as you put the last round into the chamber, the bolt can't fully lock into place. I've tried closing it with removed magazine (the floorplate + spring + follower combo, idk if it's really called a magazine) and it works, so the problem must be something to do with the mag. To my eye there isn't any obvious part missing or damaged. Any idea what might be causing the issue?
@@KrakmanTaiwanGun dzień dobry chciałem kupić ten karabin ale nie mam pewności czy wysyłka idzie z polski. Czy jest jakaś możliwość poinformowania mnie o tym?
We have suspended UK delivery due to Brexit and a huge backlog in UPS and British Customs. And orders above 140 pounds are not our idea. After Brexit, all orders below are treated differently by the Customs, and we would have to pay bigger taxes for that.
@@KrakmanTaiwanGun to be fair i never voted for Brexit, but am now sick of hearing about it been used as a an excuse. Other countries manage to post to the UK!
I own this Bouble Bell spring action for nearly four years. If you are considering purchase, i urge you to keep in mind that the Bolt Assembly is the first thing that is going to break few months in. The stock Bolt Assembly is made out of extremelly cheap pressed alloy and some rubbish plastic. Please use safety glasses when operating this gun, or the rear plastic part of the Bolt Assembly just might fly into your face. When you purchase this Airsoft rifle, it is worth considering buying a spare Bolt Assembly, or alternatively, look for a full metal version, which are way more reliable, as they are not made out of crappy alloy anymore. Otherwise the gun is built solid (i own full wood stock), but is more of a wall decoration, as it really underperforms (peaking at 150-160 FPS using .20 BBs), spring upgrade is possible, but to do that i have to say you have to do it on full metal bolt assembly, stock version won't survive the tension. Scope installation is possible as well, but as in most WWII sniper rifles, you will have to load each bullet separately (this airsoft rifle supports stripper clips).
What version do you have? You said get the full metal version, and all I see when I look up is full metal. Was there a plastic bolt instead of a metal one?
Because surely even a cheap alloy couldn’t break that easily?
@@Glottymocrappa I have a standard full wood stock version, with optional full metal bolt assembly, the stock assembly, that comed with the gun default, is unbelievably crap. If you buy this airsoft gun, i reccommend buying full metal bolt assembly separately. If you plan to use it only as a fun wall decoration, you dont need to.
@@coqzilla3811 do you have the gas version? Because I see a lot of people saying that the bolt exploded
@@Glottymocrappa no, i have Spring version. The bolt explodes anyway.
The bolt on mine just broke, spring flew. Looking to buy a new bolt or rifle from you guys soon! Thank you for the info!
Thank you, Im just invalid who loves movie weapons so I bought this one for pleasure and I didnt knew how care about it.
I hope now everything is clear :)
looks sick af
The metal bit that you stick on at the start won't get in. The black part at the end won't turn. Anything I can do?
Hey, I'm looking for this kind of model for long time! Can you tell me, how soon the double bell wooden kar98k will back to stock?
The aforementioned replica will be in stock after mid-November
How do you remove the front sight pin. Can you do a video on that.
The black pieces that came on the bolt (the long one and the round one) either fell off or broke when putting the bolt in. Is this going to be an issue? The bolt itself moves fine. The gun wont shoot, but it might simply need gas? Im really not sure about much of any of this.
please contact our techs directly at service [at] taiwangun .com - they will help you better than I ever would :)
Cześć, posiadam ten karabin i mam z nim mały problem, otóż gdy próbuję zamknąć komorę bez łusek w środku karabinu to nie da sie do końca popchnąć w dół (zamknąć) natomiast gdy łuski są w środku to wszystko działa bez problemu, wiecie co może być nie tak?
E visto a varias personas que le pasa los mismo al parecer es algo propio de ella y no un fallo.
My bolt shipped upside down. The safety level is on the underside when it shoulf be on top. How do i disassemble?
please contact our techs at service [at] taiwangun .com - they will help you better than I ever would :)
@@KrakmanTaiwanGun thank you for the quick response! I figured out the issue eventually. Was just screwed in too far over, found the little push button and screwed it on the right way.
@@knoxklay11 so glad you were able to fix the issue by yourself :)
Will the gun go on sale for Black Friday
There will be a sale for all products on Black Friday.
I might not get an answer on this question but I have the plastic spring version of this gun and I was wondering if anyone knew if it's possible to put a gas bolt on it instead
changing it for the gas version would be hard.
this had to be so clean even bro's hairy ahh arms got greased
hahahaha :D
Does the 5 shells come with the gun when you buy from TaiwanGun?
as per product description on the site
Set includes:
· KAR98K replica
· 5x 6mm shells
@@KrakmanTaiwanGun hej. Det följer fem stycken patronen
Do you have any information on if the wooden version will be back in stock?
Should be back in march, unfortunately :(
The pin on the bolt is out place you know how to fix it?
Hey i have a question. Is it possible to upgrade the spring and hop up and if yes then how to do that ?
in case of any upgrades it would be easier to contact our techs at service [at] taiwangun .com - they will answer your every question
Hey so I have my Kar98k DB for about a month and so far it's been great. Today I tried to clean the bolt and magazine as there was a little bit of dirt on them. Before I put it all back together I properly lubed it with silicon oil. The issue is that now the bolt handle won't go all the way down when on empty magazine. With shells it works fine, but as soon as you put the last round into the chamber, the bolt can't fully lock into place.
I've tried closing it with removed magazine (the floorplate + spring + follower combo, idk if it's really called a magazine) and it works, so the problem must be something to do with the mag. To my eye there isn't any obvious part missing or damaged. Any idea what might be causing the issue?
Please contact our techs at service [at] taiwangun .com - they will probably have the answers for your question :)
so this one uses shells and are they reusable?
Double Bell is actually using shells and those are reusable
what is the scope mount for this replica?
This is the one - tglink.eu/UorPM
what spray did you use?
this is not exactly the same product, but we strongly recommend this - tgun.eu/lxgt
Will Dboy's shell work as fine as double bell's??
should be compatible, but unfortunately I cannot be 100% because I don't have dboys shells to check it out for you.
Can you put a scope on it, or it will not eject?
Yes u can!
i can't put in my bolt, i think it's destroyed. i just received the package a few hours ago and it doesn't even work
Have you contacted with our customer service? They will help you better than I would.
please don't put oil on your bb's hopup, barrel,...this is just bad
Yeah, okay :)
Can you put a scope on this gun ?
yes, actually soon there will be a dedicated mount with scope for this specific replica :)
hi what type is the spay that you have use? thanks
silicone oil - like this one - tgun.eu/gBa9F
What did you put on the shells?
Silicon oil :)
@@KrakmanTaiwanGun is it necessary?
@@magnus_ducatus9684 it's not no, necessary, but it helps for sure :)
Niestety to nie jest Mauser produkcji s&t, to jest wersja na łuski od firmy boyi
Faktycznie, filmy zostały pozamieniane miejscami i źle podpisane, przepraszamy za wprowadzenie w błąd i zamieszanie. Błąd został poprawiony.
@@KrakmanTaiwanGun dzień dobry chciałem kupić ten karabin ale nie mam pewności czy wysyłka idzie z polski. Czy jest jakaś możliwość poinformowania mnie o tym?
I have one but it didn't make though pack of BB why because my bolt keep fine off every time I cock it down it go off
Have you contacted our techs regarding your issue?
Where do get trigger parts from
Yes
@@tinalyden6691 And what our techs have told you?
Want mean where do you get your spare parts for it like your
How do you add scope to this
this is the simple way: tgun.eu/ByE1D0 and here you have only the mount so you can add the scope of your choice: tgun.eu/jvD
@@KrakmanTaiwanGun thanks a lot ❤️❤️❤️
@@ArtGian no problem :)
To nie jest raczej tak, że z łusek ładowane są KARY DBOYS/BOYI/DOUBLE BELL, a z normalnego magazynka S&T/Snow Wolf?
Może i byliśmy na sto procent pewni, ale pozamienialiśmy filmy, bardzo przepraszamy za wprowadzenie w błąd, to faktycznie jest replika Double Bell.
@@KrakmanTaiwanGun Niekoniecznie - z researchu, który przeprowadziłem wynika, że S&T również robiło gazową wersję shell ejecting.
@@ookami_pl robiło, ale to jest Double Bell
YO WHEN WILL THE CYMA .507 BE BACK IN STOCK PLEASE ANWER!!!
No information right now, so probably not in the next 2-3 months.
Upset with the fact tgat I can't order anything from the UK unless its above £140
We have suspended UK delivery due to Brexit and a huge backlog in UPS and British Customs. And orders above 140 pounds are not our idea. After Brexit, all orders below are treated differently by the Customs, and we would have to pay bigger taxes for that.
@@KrakmanTaiwanGun appreciate the information, thank you.
@@KrakmanTaiwanGun to be fair i never voted for Brexit, but am now sick of hearing about it been used as a an excuse. Other countries manage to post to the UK!
Please made a m1 garand
shell ejecting garand? that's something to think about for sure :)
@@KrakmanTaiwanGun oh yes clip Ping ejecting cause thé marushin was shittushin …
let oil the BBs. hopup will be happy :D
but the gun is sexy
Believe us, we know what we are doing :) And the gun is cool, that's true :)