Build Guide: WPL C14 (C24 & C24-1). Rock Crawler V1⭐️ see description for more tips

Поділитися
Вставка
  • Опубліковано 7 лют 2025
  • In this video and description, you will hopefully find some inspiration or help and guidance through how to modify a WPL C14 Hilux 4x4 RC crawler 🤩 This has been a really satisfying build and I have tried to document it as best possible to be able to share as much as I can... keeping up the RCOCM ethos!
    It's upgrades include: Metal portal axles, 59mm Injora Oil Shocks, 70mm Injora Swamp Claws, a 2 speed gearbox and upgraded electronics.
    👇👇 Below you will find links to all the products used and any extra hints & tips I could think of relating to this build. In the video, I have highlighted the all the key points to help overcome issues you might find modifying the WPL C14 (C24 and C24-1), using these same modifications. The video is designed so you can easily pause each section to be able to study each step in detail.
    Best of luck with your build... remember to take your time, learn as you go but above all... enjoy it! 😍🤘❤️
    ❤️❤️👉👉 WPL C14 - www.wpl-rc.com...
    👀 - also check out the C24 here 👉 www.wpl-rc.com...
    👀 - and the C24-1 here 👉 www.wpl-rc.com...
    (Affiliate link purchases provide the channel a small commission which goes straight into new content - thanks for your support! 🙏🤎)
    ⭐⭐ GENERAL TIPS, HINTS AND HELP 👇👇
    Don't forget BLUE threadlock for all metal to metal fixing screws - once each element that requires it is adjusted to fit correctly or function properly ⭐⭐ You may want to pull apart the axles, shim the input gear and fix the driveshaft to the input shaft while the axle is in half for a snug fit ⭐⭐ You may feel a shim on the outside is also required for a good fitment of the driveshaft (shims best found on ebay) ⭐⭐ Make sure all axle grub screws are set correct, then tightened with blue threadlock ⭐⭐ Grease all gears with a lithium grease ⭐⭐ When plugging into the receiver, remember - 1 to turn, 2 to burn - meaning channel 1 on the receiver is for the steering servo, channel 2 is the motor connection or that of your ESC (as that has the motor wired to it) ⭐⭐ I have added front LED lights that I had spare, they will fit in to channel 3 of the receiver while still allowing the cover to fit over ⭐⭐ The springs that come with the Injora shocks aren't strong enough for the weight of the modified truck, so I have included a link to the shocks I had spare and used their springs ⭐⭐ I drilled my chassis quite far in on the chassis, I wouldn't go any further so be aware of that ⭐⭐
    ... and HERE WE GO with the mods!...
    👉 Metal Portal Axles -
    s.click.aliexp...
    👉 Axle truss (MN version for portal axles!) -
    s.click.aliexp...
    👉 Suspension links -
    s.click.aliexp...
    👉 Metal chasis brace and front plate -
    s.click.aliexp...
    👉 59mm Injora Oil Shocks- s.click.aliexp...
    👉 Cheap shocks just for springs - s.click.aliexp...
    👉 21g metal geared servo - s.click.aliexp...
    👉 Metal Driveshafts - www.wpl-rc.com...
    👉 WPL (plastic geared) 2 speed 370 motor - www.wpl-rc.com...
    👉 Motor heightening bracket - s.click.aliexp...
    👉 WPL 30A ESC - www.wpl-rc.com...
    👉 3s Lipo Batteries - s.click.aliexp...
    👉 Dumbo RC X6PM Transmitter and receiver - s.click.aliexp...
    👉 Injora 70mm Swamp Claws and 1.3" metal beadlock rims - s.click.aliexp...
    👉 Brass version Swamp Claws - s.click.aliexp...
    ⭐ 5 to 7mm hex adapters (to fit the wheels) 👉 s.click.aliexp...
    👉 Handy screw set - s.click.aliexp...
    #rccrawler #proportional #rockcrawler #scalemodel #wplrc #c14 #radiocontrol #rchobby #scalecrawling #trailtruck #howtobuild #rcbuild #rccrawling #rccrawler #rc4x4
    Edited by YouCut:youcutapp.page...
    Music: Tokyo Cafe
    Musician: TVARI
    URL: / vlogmusic

КОМЕНТАРІ • 33

  • @KentuckyRCAddict
    @KentuckyRCAddict Рік тому +1

    That thing is amazing looking. You did one heck of a job 🤟

    • @rcocm
      @rcocm  Рік тому +1

      Wow, thanks! I have already learned however from a viewer, of a way of fitting this motor without the heightening brackets and therefore no bodywork cutting required. The method involves shortening the gear selector and cutting/gluing back the servo mount so that everything fits where it should and the gear selector doesn't foil the suspension links ... every day is a school day! 💪💪👌

  • @Jason_Earle
    @Jason_Earle 9 місяців тому +2

    I am writing you to say thank you for the time and energy in making this tutorial on the wpl c series..i am currently waiting on the frame and a few other odds and ends..i chose the mn99s portal axles due to being a little wider..i will be going with an over axle servo mount. I am going to use 1.3 wheels with 70mm injora cling on's. Purchase 70mm shocks but i think they will be a little to long..this is my 1st wpl build. I am excited to get started.

    • @rcocm
      @rcocm  9 місяців тому +1

      Thanks so much for you kind comment! The build videos are a lot of work but I really enjoy making them and the feedback has been awesome and humbling!
      Portal axles 👌 just open up, blue lock-tite the axle grub screws and all screws in general. Pop a 0.5mm shim under the pinion gear then attach driveshaft while axle is in half to ensure a snug fit, then assemble the rest. Make sure you have an MN axle truss coming as the WPL one is narrower. You'll find 70mm shock too long without serious modification. I rate the Injora 59mm very highly and also these budget versions...
      s.click.aliexpress.com/e/_De6UL27
      Good luck with your build... anything else just shout via comments or DM 👌🤘💪

  • @mattp_505
    @mattp_505 11 місяців тому +1

    Sweet mods! There are some good tips in this video

    • @rcocm
      @rcocm  11 місяців тому

      Thanks very much.. I'm glad you think so! Thanks so much for watching ❤️

  • @coreyfuchs730
    @coreyfuchs730 5 місяців тому

    Articulation is the key.. obviously you master it.. great job

    • @rcocm
      @rcocm  5 місяців тому +1

      How kind of you 😊 Thanks so much! I'm still running this set up, it's now my white C14 Spider 😁

    • @coreyfuchs730
      @coreyfuchs730 5 місяців тому

      @@rcocm 😃😑😀💯🦾💣

  • @pandacrawler6x6
    @pandacrawler6x6 11 місяців тому +1

    Awesome Build and GREAT tutorial and Info Share!!!
    💪🏻🏆👌🏻
    Thks my Friend 🐼🐻‍❄️👌🏻

    • @rcocm
      @rcocm  11 місяців тому +1

      Thanks Panda! I'm glad you think so! I know there's probably other ways but that's how I done this one on this occasion 😜💪😁

    • @pandacrawler6x6
      @pandacrawler6x6 11 місяців тому

      You're welcome my Friend ❤

  • @suvsteve
    @suvsteve Рік тому +1

    thats great realy helpfull thanks ☺

    • @rcocm
      @rcocm  Рік тому +1

      Thanks Steve, I'm really pleased how the video came out... and the truck! ❤

  • @angelominiaturasRC
    @angelominiaturasRC 9 місяців тому +2

    Nice , very nice 👏👏👏🇧🇷🇧🇷🇧🇷💪💪💪

    • @rcocm
      @rcocm  9 місяців тому

      Thanks so much 🙏 😊 I hope it's been of help or inspiration 😉👌

  • @CK4RC
    @CK4RC 11 місяців тому

    Very cool build.

    • @rcocm
      @rcocm  10 місяців тому +1

      Thank you my friend! It's a bit of a tight squeeze but transforms the truck 💯🤘👍❤️

    • @CK4RC
      @CK4RC 10 місяців тому

      Absolutely!@@rcocm

  • @magicmiya7095
    @magicmiya7095 11 місяців тому +1

    What brand are those tire because I need some for my mn99

    • @rcocm
      @rcocm  11 місяців тому

      Hi, thanks for watching... see links in the description box below the video for all the upgrades. You will also need the 5-7mm hex adapters to allow them to fit... also linked for you 😁 good luck with your build! 👍

  • @rcworldKenya
    @rcworldKenya 9 місяців тому

    Nice, 👍 just subbed

    • @rcocm
      @rcocm  9 місяців тому

      Thanks so much! I hope you found some inspiration! 👌💪👊

    • @rcworldKenya
      @rcworldKenya 9 місяців тому

      @@rcocm Yes I did, thanks 👍

    • @rcocm
      @rcocm  9 місяців тому

      @@rcworldKenya excellent 😊🙏💪💪

  • @Haveyouhadyourtherapytoday
    @Haveyouhadyourtherapytoday 7 місяців тому

    I put the same wheels and tires on my c54

    • @rcocm
      @rcocm  7 місяців тому

      Brilliant!! Absolutely can't go wrong for their scale looks and awesome S5 tyre compound 👌💪💪👍 Thanks for watching and commenting! 🙏❤️

  • @motoinsanity2619
    @motoinsanity2619 11 місяців тому +2

    Tires are backwards

    • @rcocm
      @rcocm  11 місяців тому

      Thanks for pointing that out! 😅 They're on and off quite a lot not to worry! ❤

  • @marcosaparecido5008
    @marcosaparecido5008 9 місяців тому

    Manda o link das roda

    • @rcocm
      @rcocm  9 місяців тому

      All the links are in the video description... click 'more' in the box under the video that's playing 👌👍 thanks very much for watching 😁

  • @Quannguyen12345-l
    @Quannguyen12345-l 8 місяців тому

    Anh người việt à

    • @rcocm
      @rcocm  8 місяців тому

      No, I am English 👋