WPL LCG Build - I’m Done, But I’m Not
Вставка
- Опубліковано 25 бер 2023
- Installed the body and took this WPL LCG build out on the trail to test it out. Everything I used in this build is linked below.
Injora 1.9 Beadlock Wheels: amzn.to/3mUKHwN
5mm to 12mm Brass Wheel Hub Hex Adapter: amzn.to/3K5dB6f
24g Brass Wheel Hub Extensions: amzn.to/42a9du1
MN78 Driveshafts: amzn.to/3yFv26W
MN86 Wheels and Tires: amzn.to/3YVf2bI
75mm-85mm Suspension Links: amzn.to/3Z30xmg
AIMROCK 2-Pack 1/10 RC Crawler Aluminum Shocks Internal Spring Dampers 70mm: amzn.to/3S5IVUQ
LaTrax ESC: amzn.to/3if19FQ
1.55" Injora Stamped Beadlocks: amzn.to/3igEokB
My Old Wheels and Tires: amzn.to/3H1MhkM
Servo Plug Kit: amzn.to/3BLbMFZ
Bob Smith Industries Insta Set: amzn.to/3sW1crR
Bob Smith Industries Super Glue: amzn.to/35aEwf8
Ovonic 2S 1000mah Lipo Batteries: amzn.to/3rbJ25w
Servo Plug kit: amzn.to/3s34B7D
Flysky GT2B Controller and Receiver: amzn.to/3ISCfnA
370 Motor Metal Transmission:
Amazon: amzn.to/3q483Pz
Banggood: www.banggood.com/custlink/3GG...
9g Servo:
Amazon: amzn.to/3f2nC4b
Banggood: www.banggood.com/custlink/v3K...
Servo Mount: amzn.to/33jdzVL
Metal shocks with shock mounts: amzn.to/3p2y55d
Metal suspension links: amzn.to/3p1tZdC
2.5mm hardware kit: amzn.to/3F5AnpW
I am an affiliate of Amazon, Gearbest and Banggood. This means if you purchase anything using any of the links I provide in any of my videos, I get a small commission and it helps me out with funding this channel to bring more content. Thank you to everyone who had already purchased items through my links. You are all awesome!!
Support the channel by purchasing Shirts and Merch, link to my online store through Teespring is here: teespring.com/stores/ready-to... - Авто та транспорт
Beyond Awesome. Great Job.
Thanks WV!
came out nice, brass weights for inside of the tires will add that weight you need
I'm such a WPL fan now, especially after driving the C24. Excellent work there! As far as capabilities goes, these WPL crawlers punch above their weight class for sure, especially for the price!
Thanks! WPL really has a huge following. They are usually my most watched videos.
@@ReadytoRunRC you're right, they do have almost their own little rc subculture. I was blown away to see all the parts supply and upgrades available. To be honest, my review of the C24-1 was my very first crawler ever and even with my lack of crawler experience, it was so much more capable than I expected, I was just blown away and totally into crawlers now.
@@Rek_Rc my first crawler was the SCX24 and that had me hooked. I never thought I could have so much fun going so slow. I’m on a couple Facebook wpl pages and some of the builds you see on there are incredible. People really have a great imagination. I went LCG because I would really like to conquer the dam with it and I also don’t see as many of those on UA-cam but I really want to get a C24 and do a more scale build with it. Glad you’re enjoying your C24 and I can’t wait to see what you do with it if you decide to do a build on it.
@@ReadytoRunRC those are cool, I actually nearly bought an SCX before I saw the WPL and got curious about it.
i knew it was going to be beast mode when you got done! looks fantastic! thanks for the share! stay awesome!
It turned out so good. Thanks!
@@ReadytoRunRC can you please send me a link to the body mounts you used
if you want the w/base more longer, you can extend it by using the wpl metal linkage at the rear. the w/base should be at 260mm..80mm droop shock front & rear and it work great too😊
Great job👏
Thanks!
Nice bro 😍
Was following it it’s finally done 🎉🎉🎉
Thanks for following along!
Your wpl come out really awesome my friend! Look cooler with the trimmed body & more stable when crawling the rocks! You've got fun place for rc crawling too😁👍🏼
Thanks 👍
Awesome bulid 😎⭐⭐⭐⭐⭐
Thank you. I still have a few more things I want to do to it.
Awesome build…!!!😍😍👍👍
Thank you!
I’m thinking my ultimate lifted wpl was a failure, so I’m thinking about doing something like this.. it’s got portals, and wide deep dish aluminum slots so I wouldn’t have to cut the body like that.. now ya got me thinking 🤔
Glad I could inspire a build for you.
Great build 👏 👌🏻 👍🏻
Thank you!
Earlier tonight while looking on Amazon for FCX24 upgrades, I kept seeing the WPL C14 pop up. Which prompted me to see if there were any reviews on youtube. I picked 1 video and now have watched ALL your vids tonight watching the whole transformation and am impressed of how much was able to be done and all the changes. Usually people will put up a vid on a cheap rc and basically say yeah its cheap there ya go....But you pushed it further showing the capability of what can be done. Even with all the upgrades you're still cheaper investment than what you'd have to put into an Axial or FCX as far as I can tell. I just might have to do this LCG build...Thank you for the build series. Crawler On Dude!!!!
There's so much that can be done with these, whether you go as extreme as I did or want to build a more scale crawler. I'm glad you came across my videos and enjoyed them. Thanks for checking them out. Good luck with your build if you decide to go that way. Crawler on!
Makes me wanna try one of these!!
Such simple looking little layout.
Get rid of everything alway as lol!!
Unless you want a scale rig chop and chop!!
Man great work huge sub
It is quite simple. I’m doing more chopping on it because I put bigger tires on and they hit the hood when I turn. Thanks for the sub. I should be uploading a video with more updates soon.
HELLO!! AGAIN, I HAVE PUT IN THIS MOTOR BUT IT IS VERY VERY SLOW WHEN IT GOES FORWARD, BUT IT IS A LITTLE BIT FASTER BACKWARDS. DO YOU KNOW WHAT COULD BE CAUSING THIS? THE ENGINE IS WELL INSTALLED LIKE YOURS
That came out really good. I thought it would climb the dam better but like you said it needs better tires
Thanks! And I have been looking at the RC4WD rock creepers to put on this. They’re just a little bigger and should offer a lot more grip. We will find out in the future.
So cool!
I want to build one now🤣
Cool paint job tho
Do it. It was a fun build. Thanks!
@@ReadytoRunRC Budget permitting 🤣
But yes, I would love to and maybe it'll even be my next project!
Hello friend!! It’s spectacular for you!!! I would like to know what is the servo you have installed there, if soon you have the Amazon link please 🙏🏻
Hello. The links to everything is in the video description.
Thats awesome build bro,great job i love redcat ascent fusion i ve seen it on UA-cam one of the best RTR but too expensive for me i dont have enough funds for it, but you're work looks possible to me but im a newbie here i started last week ago
Thank you! The Redcat Fusion is very cool. Most of what I did is pretty simple. Good luck with your build.
Would it be possible for that build to be more stable downhill by having a dragbrake? If ever what would be the best upgrades, tnx a lot, im waiting all my parts ordered online inspired by your awesome build 😊
Superbe👍🏼👍🏼
👍
Amazing build❤😄👍..I'm a new subscriber here..do you have lcg build for mn45 video?..can I use this setups in it?..
This is my only lcg build. You could try. And thanks for subscribing. Appreciate it.
@@ReadytoRunRC it's ok.. this will be enough information for me to build LCG.Thank you so much anyway for this build.. hope you don't mind if I have some follow up question later..thanks..😎👍
Is the servo mounted on the axial
Yes
How about portal axle?)))
Portal axles raise the center of gravity which does the opposite of what I'm trying to accomplish by having the lowest center of gravity possible.
Did you go with the 70mm shocks?
Yes
Thanks! This build so far turned out really good with some better tires and you'll be set. I currently have one of these sitting around on my shelf that im bored of and isn't at all capable lol. You certainly gave me the motivation to turn mine into something alot better.
@@brandorc94 that’s great! I think you should go for it. Glad I could be some motivation.
I appreciate it. I just went and watched your video on the km axles for these. I got a set of them and I got so frustrated I gave up 😂
@@brandorc94 sometimes it can get frustrating. Mounting this body had me on my last nerve. Finally figured it out and it worked. Good luck with your build.
it can take the dam if you approach it in angle
It can not. It doesn't grip no matter what angle you go.
Did you ever make it up that dam
No. I tried again with the newest changes and it just can’t do it. I don’t think I’ll ever get this one up it.
Scrub those tires with dawn dish soap if really makes a huge difference
I’ll try that. Thanks.
Что за аммортизаторы, не подскажете?
Good build but that shocks are sucky ones...
Ngomong opo kue
Body is to far back