Thank you for video..Im having same problem with my sons toyota camry .I hope this is the answer to the problem..your right it has been hart to find anything about this problem on youtube..But you tube has been a life saver on alot of other car problems .Thanks again ..
Hello sir i have a golf 4 it has los of power no engine light came on i also removed the maf sensor plug and started the car and no engine light turned on does that mean i have a dead ECU
hello are you in california , the bay area., i have a 94 supra i need help on and it has the same problems, i pretty replaced almost everything. my car cranks and starts but bogs out and die when i tap on the gas pedal and the check engin light isnt turn on.
Would the position of the positive wire have anything to do with it I have something similar and I notice on your video your positive wire is on the left of the fuse block mine is on the right.. I replace mine with one from eBay
Bought my 03 z non running it cranks but doesn't start it also doesn't hold under its own power when key is in on position it sits at 9 volts maybe then 1 radiator fan turns on and it just can't handle all the power it's pulling, I also don't have a check engine light and can't even get my scanner to read the car, the only code I was able to get was p1000 and many people have said it's the ecu I checked the ecu cleaned some corrosion off the pins and opened it up but don't see anything that looks blown
I’m thinking of buying an 03 that cranks but no start engine lights on dude says ecu needs reprogrammed 3k for the car. U get it figured out yet was it worth buying the z?
Yes bro i have the exact same problem. Its an 03 that cranks but wont start and the radiator fans turn on when the car is in acc mode. If you found a fix please let me know, I’m struggling right now
My ‘Check Engine Light’ does not come on at all. My car is running perfectly fine. I do have a code popping up which is p0603. Any advice on what could be the issue?? I drive a 2010 Nissan Pathfinder.
I have disconnected ECU and connected it back. When I turn key ON position, ABS lights blink once (I don't see check engine lights that come on before cranking the car) and the radiator turns on immediately. When I try to crank the engine, it won't start. Do you have the same problem?
Zapata Autosports i just did it wasn’t blown but I switch it with a different fuse and nothing i just recently sent my ECU to UpRev to get NATS disable so I don’t know why it’s not starting the inky lights on my dash are ABS AND BRAKE AND OIL LIGHT
I believe I’m having the same problem. First it was ignition coils, then it was an ecu fuse, and now it’s a MAF code p0102. The code is for the MAF circuit being too low on voltage. Tomorrow I’m going to get the extra grounds and install them but will that fix that maf issue or is something burnt out?
I have also the same problem! a few weeks before, I replace all of the 6 ignition coils. When I push the start button, the car won't start won't crank. DVD, audio, anything all ok. but the car won't start and crank. I can't find ign SW in my car. my car model is a 2008 Lexus ES350. plz find ign sw plz.
It happened to me i removed wrong fuse and then my car didnt want to turn on so i was like damn that was not the fuse so i put the fuse back and it turned on but i have check engine light now instead of removing Taillight fuse i removed Ecu fuse 🤦🏾♂️ i wonder if autozone will erase the engine light so far my car drives good since the day that happened its been 3 days
Foreign Enterprises BCM controls the electrical interior/exterior components of the vehicle such as power windows, cluster information, other functions. ECM controls only engine functions
Zapata NZ Is there only the ECM and BCM? My ECM went out and wanted to get a junk yard replacement, which cheapest software can I vin code it with? And is that the only thing I would have to code ?
I am having a similar problem when I go to turn the key all I hear is a click I thought it was the starter so I replaced that and nothing so I replaced the neutral safety switch and clutch sensor and nothing I did have problems with nats before it completely stopped working everything powers on perfectly it’s just all it does is clicks I’m thinking about replacing the Ecu Bcm and ignition cylinder w key all together if I replace those would I have to do anything else or is it just a plug and play?
For anyone wondering tge ignition relay is the R5 relay. Not the small fuse but the black one. Check the diagram to see which one is R5
why can’t you just show the fuse , where’s it located ? I’m having the same problem
You fix it
Thank you for video..Im having same problem with my sons toyota camry .I hope this is the answer to the problem..your right it has been hart to find anything about this problem on youtube..But you tube has been a life saver on alot of other car problems .Thanks again ..
Same here if you dont mind whats the issue ?
Thank you for the helpful information .
I've been racking my brain and completely stresses wondering why my check engine light wont come .....
This video will save me a ton of money !!
Plus maybe now car will pass D.E.Q. , and finally able to get new tags .
you need to show the fuse location you mentioned,if not this video was nothing but just blurred information
My car has the same problem, though it's a 1997 Corolla, no engine light on dash and won't even crank, please what's the number of the fuse and loc. ?
How did you solve the issue? Having the same problem
Hello sir i have a golf 4 it has los of power no engine light came on i also removed the maf sensor plug and started the car and no engine light turned on does that mean i have a dead ECU
Thank you very much for this video man saved me a lot of money
hello are you in california , the bay area., i have a 94 supra i need help on and it has the same problems, i pretty replaced almost everything. my car cranks and starts but bogs out and die when i tap on the gas pedal and the check engin light isnt turn on.
Found the blown fuse replaced it still crank no start
My Toyota Mark X check engine light comes on once after cranking and goes off again, please someone help me
Would the position of the positive wire have anything to do with it I have something similar and I notice on your video your positive wire is on the left of the fuse block mine is on the right.. I replace mine with one from eBay
Bought my 03 z non running it cranks but doesn't start it also doesn't hold under its own power when key is in on position it sits at 9 volts maybe then 1 radiator fan turns on and it just can't handle all the power it's pulling, I also don't have a check engine light and can't even get my scanner to read the car, the only code I was able to get was p1000 and many people have said it's the ecu I checked the ecu cleaned some corrosion off the pins and opened it up but don't see anything that looks blown
I’m thinking of buying an 03 that cranks but no start engine lights on dude says ecu needs reprogrammed 3k for the car. U get it figured out yet was it worth buying the z?
@@ashyp0ok96 same man, anything?
@@thouxenbanlan i bought an 84 200sx instead
Yes bro i have the exact same problem. Its an 03 that cranks but wont start and the radiator fans turn on when the car is in acc mode. If you found a fix please let me know, I’m struggling right now
@@vincentgiordano403lmk if any of you fixed your car
CAN YOU PLEASE TELL ME WHICH FUSE ?
Foreign Enterprises hello! Check the labels in the fuse covers and look for “ign sw”
Bro I have hyundai accent 1996 1.5 check engine is on but is not starting and doors lights is off when I open the doors petrol light off
Which fuse is it exactly?
My ‘Check Engine Light’ does not come on at all. My car is running perfectly fine. I do have a code popping up which is p0603.
Any advice on what could be the issue?? I drive a 2010 Nissan Pathfinder.
I have disconnected ECU and connected it back. When I turn key ON position, ABS lights blink once (I don't see check engine lights that come on before cranking the car) and the radiator turns on immediately. When I try to crank the engine, it won't start. Do you have the same problem?
Did you fix it?? I’m having. The exact some problem I need help it’s been a month since this car has started
Check the IGN SW fuse in the IPDM in the enginebay.
Zapata Autosports i just did it wasn’t blown but I switch it with a different fuse and nothing i just recently sent my ECU to UpRev to get NATS disable so I don’t know why it’s not starting the inky lights on my dash are ABS AND BRAKE AND OIL LIGHT
Zapata Autosports there is no fuse called IGN SW there’s only a 10A ECU IGN AND 15A IGN CONT & ECCS
@@PublicidadesMatamoros Yes I fixed it. In my case, there was a loose connection to the white connector (not ecu connector or ground wire)
Bro what what fuse is it idk which one ur talking about how does it look
Hi! Ign sw fuse right behind the battery
I believe I’m having the same problem. First it was ignition coils, then it was an ecu fuse, and now it’s a MAF code p0102. The code is for the MAF circuit being too low on voltage. Tomorrow I’m going to get the extra grounds and install them but will that fix that maf issue or is something burnt out?
what happened
I have also the same problem! a few weeks before, I replace all of the 6 ignition coils. When I push the start button, the car won't start won't crank. DVD, audio, anything all ok. but the car won't start and crank. I can't find ign SW in my car. my car model is a 2008 Lexus ES350. plz find ign sw plz.
It happened to me i removed wrong fuse and then my car didnt want to turn on so i was like damn that was not the fuse so i put the fuse back and it turned on but i have check engine light now instead of removing Taillight fuse i removed Ecu fuse 🤦🏾♂️ i wonder if autozone will erase the engine light so far my car drives good since the day that happened its been 3 days
What’s the BCM and what’s the difference between the ECM and that module
Foreign Enterprises BCM controls the electrical interior/exterior components of the vehicle such as power windows, cluster information, other functions. ECM controls only engine functions
Zapata NZ Is there only the ECM and BCM? My ECM went out and wanted to get a junk yard replacement, which cheapest software can I vin code it with? And is that the only thing I would have to code ?
I am having a similar problem when I go to turn the key all I hear is a click I thought it was the starter so I replaced that and nothing so I replaced the neutral safety switch and clutch sensor and nothing I did have problems with nats before it completely stopped working everything powers on perfectly it’s just all it does is clicks I’m thinking about replacing the Ecu Bcm and ignition cylinder w key all together if I replace those would I have to do anything else or is it just a plug and play?
Did you fix your problem?
Awesome video! keep it up!
I have same proble thanks I go look for that fues
I really hope this works
I’d that same on Mitsubishi lancer 2002
My car just turned off it cranks but won’t turn on & my obd can’t read the ecu & my engine light does not come on
Did you fix it? What was the problem?
@@victorb7551 I’m having exact same issue
@@victorb7551 also did you fix it?
did you fix it ????????????
Yo you fix it?
Why justt talk istead show to people I dont u derstand.