Partom Vs RMRC 📡 1.3g Receiver Comparison - Interesting Results!!
Вставка
- Опубліковано 17 чер 2020
- 🔥 🔥 🔥 🔥 FULL SETUP AND LINKS IN DESCRIPTION BELOW ⬇️ ⬇️ ⬇️ (Click 'SHOW MORE'👈🏻 )
A side by side comparison of the $22 Partom rx Vs the RMRC $55 rx. Flight was using the Mini Talon (full setup below). Although the Pepperbox isn't a receiver, I added my pepperbox feed in the comparison just so you can see how well the directional antennas works compared to an omni. The Pepeprbox is hooked up to a RMRC rx.
Partom Rx & Vtx ► tiny.cc/PartomRXandVTX
RMRC Rx ► tiny.cc/hbdv0y
Partom 800mw Vtx only ► tiny.cc/kwcv0y
Antennas used on both Rx's for the test ► tiny.cc/SingularityCP
Skyzone OLED FPV Goggles ► tiny.cc/Skyzone03O
Fatshark goggles ► tiny.cc/o7cv0y
☕️ 👋🏻 Hey, thanks for watching! If you enjoyed this video or found it useful and would like to show your appreciation/support for my channel, why not buy me a coffee :) ► tiny.cc/BuyAdamGaCoffee
🔵 Follow me on my Facebook page for updates, build logs, chat, random pictures & vid clips that don't make it to UA-cam: / adamgdoesfpv
📷 Follow me on Instagram @adamgdoesfpv ► tiny.cc/AdamGonInstagram
Sites I get my awesome FPV goodies from:
✅ Banggood ► tiny.cc/BanggoodFPV
✅ RMRC ► tiny.cc/RMRC
✅ AtomRC ► tiny.cc/Atom-RC (Use coupon 'AdamGdoesFPV' for $10 off)
✅ Amazon ► tiny.cc/Amazon-FPV
✅ HobbyKing ► tiny.cc/HobbyKing
========Mini Talon Setup========
In the air:
-Mini Talon Kit ► tiny.cc/MiniTalon
-SunnySky Motor ► tiny.cc/SunnySky2216
-8x6ep APC prop ► tiny.cc/8x6ep
-Metal gear servos x 4 ► tiny.cc/MG91
-60a ESC ► tiny.cc/Skywalker60aESC
-FPV Camera (Main front) ► tiny.cc/FoxeerPredator4
-FPV downward facing camera ► tiny.cc/9scv0y
-DJI HD Camera ► tiny.cc/DJIosmoAction
-Sandisk 64gb V30 Micro SD ► UK Link: tiny.cc/SanDiskV30UK - USA Link: tiny.cc/SanDiskV30USA
-360 Degree Pan Servo ► tiny.cc/owev0y
-1.2g Vtx ► tiny.cc/kwcv0y
-1.2 Antenna ► tiny.cc/VASBluebeam1G2
-Dragonlink Micro Rx ► tiny.cc/DragonLinkRx
-MFD Autopilot with Airspeed sensor ► tiny.cc/8ucv0y
-Servo horns ► tiny.cc/ServoHorns
-Adjustable Pushrod Linkage ► tiny.cc/PushrodLinkage
-Turnigy 5v UBEC ► USA link: amzn.to/2z7HOKM UK link: amzn.to/2ib6hfa
-Quanum 12v UBEC ► USA link: amzn.to/2xHBbTq - UK link: amzn.to/2ylYBKM
On me:
-Taranis Transmitter ► tiny.cc/DragonLinkV3tx
-Dragon Link V3 tx ► tiny.cc/6xcv0y
-SRH771 diamond antenna ► USA link: amzn.to/2gG50ZU -
UK link: amzn.to/2yiHpZo
-Skyzone OLED FPV Goggles ► tiny.cc/Skyzone03O
-Fatshark goggles ► tiny.cc/o7cv0y
-FuriousFPV True-D Rx module ► tiny.cc/n9cv0y
On my Groundstation:
-K&F Concept Tripod ► 🇺🇸USA Link: tiny.cc/GS-Tripod-USA 🇬🇧UK Link: tiny.cc/GS-Tripod-UK
-1.2 ghz VAS Pepperbox antenna ► tiny.cc/6adv0y
-Singularity CP Antenna 1.2g ► tiny.cc/SingularityCP
-2 x RMRC 1.2ghz VRx ► tiny.cc/hbdv0y
-Diversity Demon ► tiny.cc/ubdv0y
-DVR ► tiny.cc/9cdv0y
-Turnigy 5000mAh 3S ► tiny.cc/2ddv0y
-25mw 5.8ghz repeater vtx (to send the video signal wirelessly from my 1.2ghz ground station to my goggles) ► tiny.cc/cedv0y
-Digital Volt Meter ► tiny.cc/gfdv0y
-Eachine Diversity Monitor with DVR ► tiny.cc/ehfv0y
3D Printed Parts:
-Canopy for GWS 360 servo ► tiny.cc/GwsCanopy
-Front Skid ► tiny.cc/MTFrontSkid
-Rear Skid ► tiny.cc/MTRearSkid
-Pitot mount ► tiny.cc/Pitot
-Central cage/AP holder ► No longer on Thingiverse. I can send file if requested.
-Dragonlink Dipole holder ► tiny.cc/DLholder
-360 Mount and Camera holder ► tiny.cc/360MountCameraHolder
========3D Printing Equipment========
-3D Printer ► tiny.cc/qql96y
-PLA filament ► tiny.cc/EryonePLA
-TPU filament ► tiny.cc/SainsmartTPU
-PETG filament ► tiny.cc/SainsmartPETG
-Digital Calliper ► tiny.cc/DigitalCalliper
========Build equipment========
-Flat Carbon Strips for reinforcing lid ► tiny.cc/CarbonStrips
-E6000 glue ► tiny.cc/E6000Glue
-Laminating Iron ► tiny.cc/LaminatingIron
-Laminate ► tiny.cc/laminate
-Hot glue gun ► tiny.cc/HotGlueGun
-Foam Cutting Tool ► tiny.cc/vxgv0y
-Heat Gun ► tiny.cc/AdjustableHeatGun2000w
-Watt Meter ► tiny.cc/WattMeter
-3M90 spray adhesive ► tiny.cc/3M90adhesive
========Other Video Equipment========
-Macbook Pro ► 🇺🇸 tiny.cc/MacbookPro-USA 🇬🇧 tiny.cc/MacbookPro-UK
-External Hard to Store Final Cut Pro X projects ► 🇺🇸 tiny.cc/Seagate2TB-USA 🇬🇧 tiny.cc/Seagate2TB-UK
-Computer Mic ► 🇺🇸 tiny.cc/AU-GM30-Mic-USA - Розваги
![✔ Дальнобойная видеосвязь на 1.2GHz. Обзор оборудования, совместимость, делаем ФИЛЬТР [1.2G FPV]](/img/n.gif)
Partom Rx & Vtx ► tiny.cc/PartomRXandVTX
RMRC Rx ► tiny.cc/hbdv0y
Partom 800mw Vtx only ► tiny.cc/kwcv0y
Antennas used on both Rx's for the test ► tiny.cc/SingularityCP
Hey mate great video, do you think the RMRC is worth the extra $$, it's more then double the price shipped to my country so I was thinking the Partom and use the money I saved on a good antenna.
@@MrTwojaythomo Thanks :) It's hard to say if the RMRC is worth the extra money, it depends what your goals are and what your budge is. However, I can tell you I happily use the Partom on my GS now for the omni antenna. And you can see from this video, there isn't a huge difference in performance. Hope this helps
I tell you that I bought two of these Tx in Banggood and they are a fiasco not even with the best antennas that I have with which I achieve more than 20km with these Tx I have not even carried 150 meters and loses the signal completely, that purchase was made this year, I see that is already out of sale ... they are shit
Glad to see this comparison, Ive always wondered about the performance difference!
Cheers, glad it was useful.
Might be worth looking inside to see what differences there are. As always Adam, pleasure to watch your videos.
Thanks Anthony. I agree, would be good to know the full difference between them. I'll see about doing this in the future.
Great content and comparison, Adam!
Thanks for the feedback, it’s appreciated 😊😊
Thanks Adam! It was such an excellent reference. I've been looking for a video in which I could understand these differences and this video explains it perfectly. Since I am close to Mexico City and terrain is very irregular (mountains, valleys and hills with considerable altitude differences), I think I'll go for RMRC.
Glad it was helpful! I also searched for a comparison in the past and found that one didn't exist, so that's why I made this video. Good luck with your flights, mountains and valleys in Mexico sounds amazing!
It's a great comparison, good job!👍
Thanks! 👍 Glad it was useful 😃
This is great! I thought the partom was really bad due to banggood reviews, but this increased my confidence!
Glad it helped Brian. I'm pleasantly surprised with how well it works!
The other thing to note when comparing the Partom to the RMRC receiver is you won't pay duty on the Partom but you'll almost certainly get charged duty ordering the RMRC from the US. I bought the Partom then later upgraded the internal receiver to RMRC's receiver
Interesting Dave. Any more details about that receiver upgrade? Thanks.
You could technically still get his by taxes on the Partom but I think you're right that it's more likely you'll get taxed on items from the US. Also the Partom is normally free postage but you have to pay postage when buying from RMRC. I might upgrade my Partom if I have free time some day for a re-test. Cheers
@@StefanNaewe rmrc used to sell the custom tuner separately so you could upgrade the Partom unit. I can't find it on the website now maybe they've stopped selling it
@@AdamGdoesFPV Well that is true but banggood do offer insurance for that
A big THANK YOU! for doing that. Now I know I can't go (that) wrong with the cheaper option.
Happy to hear it was useful :) Cheers
Great test, 1.3 GHz is awesome! I have both receivers and had not thought about a comparison test like you just did. Very interesting results for sure. One thing is I usually fly the same ranges with lower power transmitters. 200 MW (actual output power is 160 MW max) and 400 MW (actual output power is 360 MW max). Keep testing and showing results as it is appreciated!
Glad you liked it! I used to fly only the 400mw... but now I only buy the 800mw because it'sso much more readily available and it just works well. Some day I need to try again and keep going until the feed is lost completely, would be good to know how far I can go on an omni.
Very good comparison, I have the readymaderc rx, thanks for sharing. 👍👍👍👍
Thanks for watching 😁 the RMRC is a solid performer, will be sticking with mine 👍🏻
Adam just amazed how far you get🥴👍good effort really.
Cheers Pete 😎
Great test, thanks
No worries. It was an interesting test if nothing else 😄
Nice video Adam and definately a eye opener. That's some very good range on just the omnis. Def a eye opener for myself using the pardom rxs
Thanks 👍I bet you've been happy with the performance of the Partom too!
Nice informative video Adam.
Cheers mate 😃👍🏻
This is thebest video ever thank you!
You're welcome, glad it was useful 👍🏻
Great comparison Adam, had to go partom few months back as RMRC didn’t stock any RXs (they told me they were looking for new suppliers). I see they still didn’t take stock. Coincidentally I change the SAW filter (bought from RMRC) today on my partom, haven’t done a flight yet so too early to say if there is any improvement. Fingers crossed! Cheers again Adam, always look forward to your videos!
Ah cool will be interested to hear if you think the upgrade made much of a difference. Cheers Aidan
Really impressed with Omni antena. Awesome vídeo as usual. Can you please upload more often ?
Thanks for watching and for the great feedback! I’d love to upload more often, it’s just hard to find time to fly and edit much more as I have 2 young children (4month old and 23 month old) 😅😅
@@AdamGdoesFPV I totally understand, spend time with your family is way important. You should make a drone related video, I want to start in it and every bit of information is good to make the best purchase
Good Comparison ....I have the Partom & had no issues as i fly above the ground ......Most times ....i hate pulling planes out of the mud ......
I’d say many people have the Partom and are happy with it. It’s not a bad performer 👍🏻
This was nice to stumble across after purchasing several of the RMRC Rx's. :)
syberphish they’re the best out there 👍🏻 I’m sure the clearview rx might be better but it’s silly money
@@AdamGdoesFPV using them with some EagleEyes for diversity.
I'm actually really glad you nentioned Clearview. I didn't know anything about it. At first I thought "well what is it and how much is it"? *whistles* Dang!!!
It's pretty nicely feature packed, I just might look into that.
A few years ago I became legally blind and had to stop driving. 80% blind now but i use a 50" plasma display for fpv, can't use goggles at all. I use a 38ft push-up fiberglass pole to mount ny rx's/antennas atop (mgs4u.com). General class ham.
I think Clearview might be beneficial for me, which makes you an expensive person to talk to. 😄
@@AdamGdoesFPV Actually I've changed my mind. It's not really worlds better, it's just better in some instances, but I don't think it's a thousand dollars better.
Too bad, if they marketed it at a reasonable price I'd already have one.
Nice , I like pepperbox.
The Peoperbox is a killer antenna 👌🏻
Great video! I'm still on 5.8g with a crosshair on goggles, which can do fuzzy 10km on a good day. This test makes me think it may be possible to get reliable 10km LOS video range using 1.3g Singularity omnis on both ends, still goggle-only to avoid a GS. So I've ordered the newly released Matek V2 VRX goggle module to try this, along with lowpass and 1.3/2.4 notch, in the hopes I can maintain most of my FrSky L9R range. If I can't get everything to play nice, I guess a GS will be necessary.
Cheers 👍🏻 I’m sure 10km is possible on omnis, once you switch to directional antennas then you can reliably go way beyond that... but yeah, a GS would be needed. I’ll be interested to hear how you get on with the Matek module, I’ve got the Fatshark one but haven’t used it very often as I just love the pepper box 😎
How is the matek going. I am looking at a gs or the matek
@@BBSlats the last few Dart XL videos on my channel have been testing range and low level with the goggle module and singularity antennas, and 2.4g LR control. So far great video out to 5km or so, and still testing beyond this before I make conclusions as I've been flying in RF noisy environments or edge of LOS mostly.
@@ZaksterBlue Thanks I am going to take a look.
Would be interesting to see a partom receiver with a saw filter mod vs rmrc, thank you vids they are really good
I agree. Maybe a future test 😁 cheers 👍🏻
100% I was going to suggest the same thing.
yes that would be nice to see after a simple mod for partom receiver, hopefully you can have a follow up video for that
Thanks for this useful information Adam. I'm just getting into the LR stuff and wings so have already ordered the partom one and a 200mw tx comes with it for 26 bucks on banggood. Also have a matek vtx coming and the antennas. So you think those 1.3ghz matek antennas are any good to use for good range or would you invest in other ones? Thanks. Nick
Hi Nick, I’ve not tried the Matek antennas but usually Matek gear is pretty decent! I’d give them a go and see if you’re happy with the results before considering other antennas. Good luck 😎
@@AdamGdoesFPV cheers Adam I've been looking for the pepperbox as I've now seen your other GS setup video and what a good but of kit that is albeit an investment lol 😂 there is a guy on ebay who says he knows the company owner and will ship to me so I'm just waiting a response and price. Hope you don't mind me asking and maybe we could private msg but I'm friends with matt stubs from Wales and I've recently moved to Northern Ireland where he says you are based? Am I'm right in saying this lol would be great to meet up maybe some time if you're up for it 😊. Cheers. Have a good day bud
Would be interested to see a comparison involving the Matek 1.3 goggle receiver at some stage please?
Hi, I don’t have a Matek rx but if I get hold of one I’ll include it an a future test. Thanks for watching 👍🏻
I flew the Partom for over a year. 15k on a directional over heavy wifi polluted areas. It never let me down
Oh I can believe that for sure
That's really good range there,it's great to hear.stay safe and enjoy your flying.
What antennas were u using ? Thanks
@@nashnazer I would have been using a home made dipole on the Mini talon and a diversity setup on the ground station. For the distance flying I made a directional plate antenna from the side of an old PC case
Hi Adam, i wanted your opinion on the new zohd drift plane. Can you make video about the plane?
I'll consider it, the only reason I'm not sure on this one is because I tend not to like the smaller lighter planes that just get blown round in the wind :/
Nice test
Just to know which freq are you use?
Thanks 😊 using 1280
@@AdamGdoesFPV nice I like to do some test in the same channel with Singularity and X Air v2 1.3g
I have to compare Matek VRX and Lawmate Tuned RX but unfortunately the Matek VTX still not compatible with Lawmate
Can you make a video showing how you connected your camera to the 1.3ghz transmitter plz.
Hi Chad, it would be a very short video. I plug the camera into the camera port on my FC, and I plug the vtx into the vtx port on my FC. That's all👍🏻
Adam, what receiver was the pepperbox hooked up to?
I’m tempted to try the new Matek v2 VRx as it can go in goggles and has a groundstation dock with it. I wonder how it compares to the RMRC?
Mr.D - Falling, with style that’s actually my next video that will be coming out 😃just received my Matek V2 Vrx a couple of days ago so next time weather allows I’ll be out to compare it to the RMRC.
In this flight you just watched my pepper box was connected to a RMRC rx 👍🏻
Adam G does FPV so how did you get the little pepperbox video that’s between the main receiver videos? That stayed clear the whole time. Looking forward to trying mine out.
@@MrD 1 Flight, 3 x antennas, each hooked up to their own receivers, and each receiver was hooked up to their own DVR :) Pepperbox was hooked up to the Eachine monitor which has a built in DVR
I just got the partom 1500mw transmitter and receiver for my rc car project after researching and going through some of your videos. Hope I get 1.5km atleast
Let me know how it goes. I've no idea how well this sort of setup will work on land 👍🏻
@@AdamGdoesFPV yes sir I will 👍 thanks
@@AdamGdoesFPV I did a test yesterday and my 433mhz MFD link UHF transmitter is causing interference with the 1.2ghz video receiver. I'll have to use a notch filter. Do you get any interference between your UHF and video system?
I was confused by the Pepperbox, as I thought that was just an antenna. What's it connected to?
That was just a little bonus view, the pepperbox is hooked up to a RMRC rx but was not a fair comparison because it's an awesome directional antenna
How far from the two receivers were you positioned with your DL v3 Tx?
The issue I always had with the cheap Phartom Rx was that it got totally thrashed by my 433Mhz LRS Tx if it was anywhere near the ground station.
I fly with a pepper box standing or sitting close to the ground station so I can turn the Pepperbox as I fly. The original Racewood Rx does the best in this regard, the RMRC Rx a little worse, and the Phartom Rxs are unusable for me. I'll throw em in the trash if they come with a VTX.
Also any VRX without the narrower bandwidth SAW filter will get thrashed pretty hard by other folks flying on other 0.9-1.3Ghz channels.
Hey, in searching for a comparison of these two receivers aI came across a few people demoing this exact issue you mention with the Partom suffering with proximity to the DL tx. In my test I was mostly wearing my Skyzone goggles and they have a 1m cord, so I was within 1m of both receivers for most of this flight. The Partom didn't seem to be reacting to this proximity though.
Interesting to hear about the Racewood, not tried one of these before, but then again I never have any issues with my RMRC rx's. I nearly threw my Partom Rx's in the trash a while back, only purchased them because it used to be the cheapest way to buy the Partom Vtx (as a set).
Good point about the bandwidth too, so anyone reading this should consider installing the saw filter or not buying Partom if they plan to fly with friends also flying 1.3g.
Thanks for watching and for your comment :) I have 6 'Featured Channels' on my YT homepage (they've been there for years) and yours is one of those 6 :D
I've tried two of the common combos now and one RMRC transmitter. Waiting on an RMRC receiver to see if the SAW filter makes a big difference... but I've been using them on an RC FPV car without much luck. I got everything looking really good in a very small area like maybe 50 ft radius but in any arrangement I try about 100ft is my max range before video gets too bad, maybe 200ft pure LOS. I don't think I could do something like a circle a McDonalds building while parked in the lot for example. From what I can tell at this point given the antennas I've tried, going a couple feet higher with a larger patch antenna mounted on a tripod is not going to improve it so much that I can actually get anything close to some of the setups I've seen on youtube. I'm hoping that little difference in the RMRC being able to maintain a proper signal will give me more range. Guys who fly seem to typically just point out that 1.3 will have decent penetration but won't provide actual long range at ground level. Yet some guys on youtube can drive around an entire neighborhood on 1.3. I went out to a parking lot the other day and mounted my crosshair xtreme v2 on a tripod and put in on the roof of my truck using the amazon/ebay transmitter and receiver and got about 75 ft LOS before the video got to the point there I knew it would go out at another 50 feet or so. So I get the impression either I've done something wrong in all the 4-5 iterations I've tried, or my receivers and FPV monitor are just not able to keep a presentable signal as well as one I haven't tried yet.. which I guess would translate to being able to actually get much farther distance, but out past 100ft or so and out of LOS it become such a horrible picture that navigating back home safely might become difficult.
Sounds like something wrong with your setup. I’d even expect to get way further than that using crappy 5.8.
This video I run a route about 12km long almost at ground level on 1.3 with very little loss of image quality: ua-cam.com/video/6isM7O8JZfI/v-deo.html
@@AdamGdoesFPV I definitely assume something is wrong which is why I've tried 3 different receivers and transmitters but so far I get about the same performance with all of them. Interestingly enough though with a 2 watt 5.8 transmitter I get about the same range with more consistent quality. I've been trying to figure out what it could be for a month now.
@@Magneticitist did you figure out why your 1.3GHz had short range?
@@flat-earther Yea actually and it was a little complicated because it had to do with the VTX's I was using. I had much better range when using an RMRC tx/rx and TrueRC singularity antennas.
The other VTX's I tried were burning up because the internal sink was not meeting up with the external one properly. They would work for a little while then burn up. The RMRC doesn't have this problem. The Partom units were seemingly the next most consistent but they were also outputting less RF power.
So for example I had a few that would start off pulling maybe 700-800mA. Over time they would only pull maybe half that.
that does appear to be that the specific receiver module inside doesn't appear to be as sensitive as the RMRC one, that said, i would love to see the actual figures on a scope to see how they par up to each other.
Yeah it would be nice to get some scientific figure for comparison. With my resources this was the best I could do. Thanks for watching 😊
@@AdamGdoesFPV no that's fine, what would be nice is to put them on the same directional antenna... what you got with a CP antenna was amazing. i was thinking 1.3 but then i don't want to have to drag everything out when i want to fly lol. i'm lazy like that
Good afternoon! Is it possible to organize a diversion from two 1.2 ghz receivers ?
Hi, if you mean use both at the same time into 1 video feed then yes. I have a full video on my ground station here with everything you need to know: ua-cam.com/video/gNXeswKjmmQ/v-deo.html
Hi are you in the UK? How did you get your pepperbox antenna and RMRC receivers over here? The postage is huge!
Thanks
Hi, I'm not in UK, I'm in ROI. Shipping should be about the same, it's $26 to me if you hit the 'Apply shipping discount' button when going through checkout. Same for you? Postage must have gone up recently as I only paid $7 shipping on my Gatling antenna.
Actually no, just been back to check and delivery on a gatling antenna is now free😱
I live in an area that is all trees and mountains. I was thinking about getting an antenna tracker for my triple feed array. Now I'm wondering if it would be better to swap over to 1.3 with an omni antenna. What do you think would be best?
Personally I much prefer 1.3g. The results I get with an Omni are much better than 5.8 with a directional antenna. It would keep your ground station cost an complexity down a lot too.
@@AdamGdoesFPV I have been thinking about switching for a while now. I think I will make the switch! Thanks for the input!
Hi Adam.. what battery you use to supply power to the Parton receiver? Is it possible to use 14.8v ?
Use 3S. It runs on 12v: tiny.cc/PartomRXandVTX
Hey man
I like to ask you one think... Because maybe you know! I have Partom receiver and i changed the Saw Filter F480-2 with one D480A, everything seems to work properly but the original Saw Filter inside this receiver is a 4 pin connection and the D480A have just 3 pin. Do you know why? Anyway after the mod signal is good on the groud i have to test is in flight!!!
Hey, sorry I've no idea, never opened it up or tried the mod
For my flying style I would buy the Partom. Only because I rarely fly low behind the landscape that far out.
Great to know for sure that it will perform
Don’t blame you 👍🏻 they’re a lot more capable that I thought they’d be
Hi there, I'd really appreciate some advice: ive bought a singularity V2 and plan to install it on my partom receiver. In the air I'd like to install a EM Vee true rc antennae. Will this work?
Further, my Partom receiver arrived with a SMA connector that seems to be abnormally large. It does not even fit the provided antennaes. I assume its a standard female sma plug. Which additional connector should I get such I can connect the singularity antennae? Thanks in advance!
With antennas you just need to make sure they match in polarisation and they will work. If circular then make sure they match in direction (right or left).
Not sure about the sma tou received
Is channel 9 on 1.3 was off limits due to it being close to full size transponder channels here in the EU.. Or did I read that wrong somewhere.
None of the 1.3 channels are legal in the EU
Hello Adam is there anyway I could contact on advice of what set up is best all round I live in Northern Ireland uk and il be doing this sort of thing in rural areas mountain valleys etc
Just want to make sure I need to buy it once if you know what I mean
I basically need everything I have fatshark dominator goggles but I feel more confident looking at a screen would love to have a chat with you on this
Hi, you can contact me though my Facebook page or Instagram account, links in video description. Best thing to do is take a look at my videos and look at the kit list in the video descriptions, then let me know if you have any Qs. Cheers :)
What are you using for RC? 433MHz system? I have black, horizontal interference in my video feed to my goggles (via AV cable) when I use my RMRC VRXs w/EagleEyes, Pepperbox and omni. However, when I use only my Matek 1.3G VRX, in my goggles, I get absolutely no interference in video feed. I have a VAS low-pass filter on my TX antenna (MFD 433MHz RC system on low power).
Hi, I use Dragonlink 433. Sounds like you need to try switching parts out on your GS to find your problem via process of elimination. How is it if you bypass the Eagle eyes for example?
@@AdamGdoesFPV Thanks for the response. I'll set my system up and test it out today. I was reading, too, where a couple of VAS notch filters (between the antennas and the RMRC VRX's) may be needed.
Any tests beetween lawmate and rmc receivers? I have both
No I don't have a comparison between these. I used to have a Lawmate rx but no longer. I won't be testing them either as it seems they are no longer readily available. Cheers
First...
Its the same with diferent brand in the box?
No they have different tuners inside.
Have you tried replacing the SAW filter in the partom? its like $5
It’s on my to do list. Just have so many projects at the moment 😅
Why not use the TBS notch filter for even better performance?
It's designed to block out 915mhz from Crossfire UHF. I'm running Dragonlink on 433mhz so this filter wouldn't help me. Cheers
How about a Partom with updated saw filter? And Lawmate receiver?
Hi, I might do an upgraded Partom test later, but I won't be buying a Lawmate just for testing sorry.
罗美接收机好一点
So if I buy either what else do I need to be a complete setup?
A lot, it's hard to answer that really. If you want to learn about my groundstation and see how I built it there's a vid here: ua-cam.com/video/gNXeswKjmmQ/v-deo.html and if you want to see what's involved in the build of a plane here's an example: ua-cam.com/video/pAjP9tucgU0/v-deo.html
Hi adam what vtx you use?
Partom 800mw Vtx ► tiny.cc/kwcv0y Check out the video description on my videos, I list all kit with links :)
For the price these partom recievers from banggood are no joke..amazing bang for buck.
Can't disagree with that. Excellent value for money!
RMRC always!
For sure the better 👌🏻😎
Pepperbox hold my beer 🍺
Pepperbox will never let you down :D
Sorry, not on Facebook or I would ask there... I looked at buying a 1.3Ghz pepperbox from GetFPV only to be really dismayed to see the cheapest shipping would come in neary $20 more than the cost of the pepperbox itself :( - Are there any European suppliers of these amazing arials that you know of? Thank you in advance, Caroline Tyler
Hey, I would order it from RMRC here: tiny.cc/6adv0y They are on backorder but you can still order it and it will ship when they get them back in stock. They are usually quick. They only charge $26 for shipping it to EU :)
@@AdamGdoesFPV Thank you! \that's a far fairer shipping cost :)
I've mod my partom receiver, to be more sensitive easy solder job to do, cheap to do
Yeah I’m aware you can mod them, but wanted to test them stock. Maybe I should do the mod and then test again 🤔
Could you tell me what is this mod?
@@jorgermartinez SAW filter mod, then you also have the RMRC Custom Tuner board
I have a partom. If I install a D480A filter on my partom, can I get the same performance as RMRC?
Not something I've tried so can't comment sorry
Hi is it 1.3 g or 1.2 g, in the listing it says, 1.3g 1.2g, it's confusing,
Same thing basically. just depends on what channel you use.
@@AdamGdoesFPV thank you, and is this equipped with audio?
You can use audio yes, but I don’t
@@AdamGdoesFPV hi bro, i checked the link banggood, the seller has commented no for audio? Im thinking of buying but is there audio available 🤔?
Hi Adam, how many watts is your video transmitter in rmrc
Hi, this video is about the receivers, RMRC vs Partom. The Vtx is this one: tiny.cc/kwcv0y However, in my newer builds I use this one: tiny.cc/Matek-1G3-Vtx
@@AdamGdoesFPV thanks so much
@@AdamGdoesFPV What is the vtx you use in your rmrc video receiver?
@@datumotion1448 There is no vtx inside a receiver. The receiver is on the ground and the vtx is on the plane
@@AdamGdoesFPV I mean the vtx you use in your rmrc video receiver
If you are using a directional antenna on your GS, it really doesn't matter which video RX you use...You didn't fly low, you are standing on top of a mountain, which gives a massive advantage....lol.
What you really need is a Lawmate VRX...🤔😳😎
The test wasn’t about the antennas though it was about a fair test of both of the receivers against each other in the same conditions 😊 ah I fly from a hill but that doesn’t mean I can’t fly low 😄 close to the ground at over 5km away while having trees between the plane and rx i think qualifies as low lol. Used to have a law mate rx but sold it a while back
@@AdamGdoesFPV Yes, agreed, I was only pulling your leg, keeping Los is obvious..It was a great comparison of both VRXs...The hilltop does give a signal propagation advantage though for sure.
Can you just open this and check hardware difference between both??? It would help community to be more clear.
Sorry I have so many projects on that I just wont have time for this :(
Could I pay you some cash to get on a call with you. I have some serious questions and issue with going long range. I'm really only able to get to 5,000 ft before i get a bunch of breakup
Hi, write down the issue here and I might be able to help without a call. Cheers
Too bad RMRC has been out of stock of the 1.3ghz receiver for almost 5 months now. - the only company still complaining about covid.
Yeah it's a shame, I know a lot of people have been trying to get hold of them for a while now