DIY Epoxy Resin Ocean Art Serving Tray
Вставка
- Опубліковано 6 сер 2024
- I've been obsessed with making epoxy resin ocean trays lately and I've been getting a lot of questions about my process. So, today I'm spilling the beans on how I create my #DIY resin art serving boards and pour my epoxy resin oceans! Hope you guys love this project!
»»»» M A T E R I A L S & T O O L S
Link to materials, tools, and products 🛠️: wp.me/p79fl6-1Hc
Table Top Epoxy: Use code "DIYHUNTRESS" for 10% off (+ free shipping): masepoxies.com/product/table-...
»»»» S H O U T O U T
Kelsey: / lovekelseyrae
Rivka: / rivkawilkin. .
Ronnie: / rll.designs
Please give these ladies some love and support them by purchasing their artwork! 💓
»»»» C O N N E C T W I T H M E
Instagram: / diyhuntress
Facebook: / diyhuntress
Twitter: / diyhuntress
Pinterest: pinterest.com.diyhuntress
»»»» T H A N K Y O U
Animation: Robert Raimondi
Music: Epidemic Sounds - Навчання та стиль
Just wanted to say thank you for the video. Because of it, I was able to make a mother day gift for my mom. It came out beautiful and she even cried a little, so thank you again!
I love how direct your tutorial is and that you mentioned that you will have fails because my first few were fails! But now I think I'm getting the hang of it, thank you!
This video was an awesome help for me… a total resin artist beginner!! Thank you so much for sharing your passion and knowledge. I can’t wait to try my first resin ocean art. ❤️
I love this serving tray!! Think it's one of the best ocean pours I've seen!!
Beautiful! One of the best tutorials that I've seen on doing a resin ocean board. Ok, the best! Thank you for posting. :)
I never saw anyone put the paint right into the resin. Cannot wait to try this thank you so much . Girl above is right your voice is perfect you explained it so well. Can’t wait to try it
Omg, this is absolutely amazing. I’ve never used resin before, but this is making me feel like I need to try! So gorgeous!
Thank you so much! It takes some practice, but so worth it once you get the hang!
No need to wait for us to be hooked......I am so excited I ordered all my supplies. Thx for the awesome inspiration
Yess! So excited for you!
Absolutely gorgeous! Thank you for the video. Great explaining! I am going to "practice" on my old cutting boards and snack trays before attempting on my old coffee, end, and sofa tables. Wish me luck!
Thank you! Good luck! It’ll take a few tries to get it, but it will be so worth it!
Excellent detail. As a newbie I fully believe I can do this after listening to your video!!
Wow amazing job! I will try it and I'm thinking this could be a special gift. Can wait your next project. Wish you a beautiful day!
Thank you! I’d love to see yours if you make one! Same to you!
Very cool look. Makes me wish I was somewhere warm. Can't wait to see the big project. Keep up the good work.
Can’t wait to share! Thank you!
Sam, all of your practice shows. This turned out beautiful!
Thank you so much! 😍
Thank you so much for sharing your process!
Great work! Absolutely love the ocean pours
Thank you! Same - so hooked!
That is beautiful! and love that everything was explained in a short time!!!!
Thank you! Glad it was helpful!
Love your tutorial. It's straight forward. I've already started a list of projects I want to complete by next Fall lol.
Yess! That’s awesome!
Great job...looks incredible
Well, your motivation speaking...works! Thank you very much!
So beautiful and u explain so well !
I came to this video on your recommendation on your epoxy resin ocean coasters. I haven't watched this video before. I don't know why. The tutorial is perfect. Thanks for sharing.
Thank you! 💕
Just ordered the Mixol white pigment. See a lot of good reviews for its lacing and cells. Your work is beautiful! Thanks for the video and tips. I want to make a shadow box from the beach trip my sons took me on for my 70th. birthday and want to make a beach/wave background for it. Hope I can get these waves down. Even if it looks half as good as yours I'll be happy. Lol!
I LOVE IT!!
Looks so effective. Bloody brilliant 😎👌❤️
Thanks for the love!
Great tutorial, I just subscribed and cant wait to see some of your other videos.
Thank you so much for the love! So happy you’re here!
It looks so nice, well done!!
Thank you!
That turned out awesome love it
Thank you!
Kick ass video Sam! We totally feel the stress of making videos while working a full time job. Don't apologize, you're doing awesome!!!!
Thank you so much for all of the love! 😍
I have no clue why, but your voice just sounds amazing to me. It’s so soothing!
Most people say it’s annoying on YT, so thank you for this! 😊
I agree, I was picturing Anna Kendrick. Made it pleasant to listen to and follow along 😌
Love!!! Good job im going to try making one!!
Thank you! I’d love that!
Beautiful job on the ocean serving tray Sam! Thanks for sharing the video with us.💖👌👍😎JP
Thanks for all of the love, JP!
Your very welcome Sam! Have a great weekend! 😎
This looks amazing 😍😍😍
Thank you so much!
Amazing work 👏
I'm going to try this over the weekend
Yess! Would love to see!
Good job ! LLOVE IT !
Thank you!
Awesome work Sam! 😃👌🏻👍🏻👊🏻
Thanks, Fred!
I love it, very top!!! 👏👏👏
Thank you!
This is an amazing tutorial!
Thank you so much!
Beautiful serving board.
Thank you!
Board looks great
Thank you!
Looks great
great video. I make epoxy resin videos myself and just love it! Keep it up!
Thank you!
Simple but stunning.
Thank you!
I think you should do wall art and add sand and shells perhaps a long couch length one. I’m gonna try it! I love the ocean, sand and seashells. Love from West Palm Beach Florida.
Love that idea!
Super helpful, dying for the weather to warm up so I can get at this in the garage. With little kids, I can't pour inside.
Thank you so much for all the information and direction in your video. Can I ask if you apply the white as soon as the colours and clear bead have been laid or do you wait for white resin to starts to warm a bit.
Superb..love video an outcome..thanks
Thank you!
Thank you so much for this video, super helpful! I'm just getting into trying these and honestly, I so appreciate how your video was straight to the point without a lot of other stuff! You did a fabulous job! One question, I saw how you squirted paint or tint into the cups...is there any issues with adding too much color and affecting how the resin sets up? Thanks again, do more of these!
Glad this was helpful! Not too many issues with too much paint... just have to make sure it's mixed well and that the ratio of resin still allows it to cure properly.
THanks for the great video!
Totally awesome
Thank you!
Fantastic!💗💗💗💗💗💗
Thank you!
I been wanting to get back in resin. But budget is tight. I thought I was out of epoxy. Tonight while cleaning I found a whole gallon in shipping box unopened of MAS. Never used it. Then I see this video. It was meant for me to try MAS❤
Nice video, I plan to make one.👍🏻
That would be awesome! Please share if you do!
I love it alot
Beautiful
ابداع وعمل احترافي👍
Beautifully done.❤
Pro-tip….You should also use scrap pieces of wood in between clamp and your wood piece wood shop 101😉
Awesome job thanks for sharing
Thank you!
Oh I am in love with these!!! Can't wait to try and make one soon!!
I would love that!
Love it and looking to add this to the craft workshop arsenal. Did you sand the top of the serving board as well including the resin, or just the bottom? Keep up the great work!
Excelente trabalho!!!
Thank you!
hank you so much for the detailed tutorial! One question, my white tinted resin is really thin and spreads a lot the minute I lay it down. I added 3 drops of tint into 3 or so ounces of resin. I'm using Mixol Universal Tints Oxide White #25 and MAS Table Top resin and hardener. Any ideas on why it's so thin?
So cute I love it ♥︎:)
Thank you!
Love the lacing in your white waves. Tried to get the white that you recommended and it says not available. Can you recommend another white that will do the same thing?
Should it be pastes or alcohol ink or acrylics? So confused. Haha
And do you use mica powders or only inks?
Hi! Can you please share tips about masking the board off with tape? How long can the tape stay on before the resin is too hard to remove it? Do you have to sand down the edge of the resin after removing the tape?
Love your video on ocean pours. Have you tried more Carribean colors of the water? More blue green than lake blue? I'd love to see it.
I AM IN LOVE WITH THIS!!!!!!!!!!!!!!!!!!!!!!!!!!! GIRL! Where is your etsy shop! I wanna buy one!
This is beautiful!! Do you have to use white pigment or can you use acrylic paint?
Do you trow away all pastics cups after a pour? Thanks for the video tutorial!
Did you gently sand the epoxied ocean portion of the board after it cured as well to make it smooth and even with the board?
great job,
Beautiful work - very helpful video. I gotta try this, thanks.
Steve Nasset
Thank you! Glad this was helpful!
I love it and can't wait to try it! Do you also run the finish over the epoxy or just the bare wood area?
Thank you! Just the wood! The finish doesn’t stick to the resin.
love this video. seems to be the most helpful for me. What type of wood is the scrap piece you used?
Thank you! I want to say ash or maple?
Gorgeous!! 💖
How do you prevent bubbles coming up from the unsealed wood?
Ahh! Okay, I tackle this in my resin River Table video! You have to seal the wood before you pour. I think that video will help!
amazing very talented artist
Thank you!
Love it Sam...
Thank you!
thanks so much for sharing your skill. I am working up the nerve and supply list to progress. Your inspiration will certainly help. Have you used the mixol pigments for all your colours used on the serving tray?
Glad this is helpful! I did not - I have a full list of products with links on my website!
@@diyhuntress Yes...I have read and researched the products on the links you provided...I was just wondering why the different brands and if you could enlighten me if there is a difference between the blue pigments you use and the mixol blue pigments. Just seems easier to order from one site.....Thanks again.
Awesome.
Thank you! 😍
On 1st layer, do you let it rest for 15minutes than only pour white resin and blow it ? Or you just pour it all together and blow it ?
Do you need a heat gun for the lacing or can you use a hair dryer
Beautiful! Ive been wanting to try this, can you tell me the wood options to use for a cutting board? Thanks
Yess! Hardwoods with small pores are best. Walnut, maple, olive wood, and padauk are all great choices!
Thanks
@@diyhuntress Do you think I can use pine wood or MDF for serving trays?
Love your stuff! I tried this today and at first it looked great but all of the colour and resin seem to run off the edges even though I made sure it was level. Any thoughts on why? I sanded it to 600 first...was that my mistake? Was the wood too smooth? Please help. What I was left with is very pale and washed out.
Hi! You may need to pour thicker layers and add more color to each layer. I’d also recommend sanding to maybe 120/220 max before adding the resin so it has a lot to grab onto. Another thing to be mindful of is where the resin is traveling to once it poured. You may have to play around with an unlevel piece if too much is falling off the edge. Hope this helps!
That's really nice. I like the effect of the different colors blended. What is the final thickness of the resin?
Thank you! It’s actually not that thick. It leaves a minor raise on the board.
Looks amazing! It's only missing some people and a shark near the hole. :)
Love that!
Do you add the walrus wax afterwards? Or is it just the cutting board oil?
❤️ (oh, and go Islanders!)
🙏🏼😁
The boards that I've seen, the epoxy is raised on the board. Would it not be ideal to sand the area where you want to pour your epoxy and make that section a bit lower than the part that will remain wood? That way your epoxy will be level with the wood and no ridge. Just a thought.
Thank you
Hey, I’ve also done heaps of these myself and would like to know how you get the beautiful lacing, I think I’m putting too much resin/whit on and it tends to blow off the board, hardly any facing though 🤔 great work. I love making them too - I’m doing a batch of 14” x 5” pine surfboards at the moment ...
Hi! I try to stay conservative with the amount of actual white epoxy I place on the board. You can always add more, but you can’t take it away. I also feel like pigment makes a big difference too. Those surfboards sound awesome!
@@diyhuntress what pigments do you use?
Sorry your list of dies and materials don't show up on your link. It says what you need and then doesn't display the items. Spcificaly what colors and brand of dyes are you using and will they work with other epoxies other that MAS? Thanks. Loved the results you got.
So you have to add a second layer?? I’m totally new to all of this!
Hi! If we were to use a store bought serving tray, do we need to add a final layer of something to seal everything and make it food safe? Thanks!
Hi! Most boards already come finished, so you should be okay. Just let the resin cure according to the bottle. 😊
❤️❤️❤️do you pour resin after mixing colours or let it sit before creating waves and blowing?
I mix the colors before pouring and I don’t wait too long before blowing it around!
Nice, Stan
Awesome, chic. 🥰🤗🍻
Thank you!
I have deep pour epoxy on hand, would this work or do I need table top epoxy?
I know I am late to the party. Thanks for sharing this video.
I think you should flatten the entire board using a router or sander, because the resin layer overlaps the wood and creates a relief on the surface.
Très joli travail bravo à bientôt salut Jeannot 🛠😉
Thank you! 😍