Reading the comments I see there is concern about the 90% alcohol damaging the vinyl. I buy collections that are often stored in basements and garages, these collections need a deep clean. For you purposes you may want to change up the formula a bit - Try using 70% Alcohol and/or use less alcohol. Enjoy those records!
Isn’t the strength of the alcohol dependent on how diluted it is with water? What’s the difference between using 70% and 91% if you’re going to be diluting it in all that water anyway? If you’re worried about the ratios he used, why not just use a little less of the 91%?
Stick with 90% isopropyl . The 70% may have other additives besides water , like emollients for rubbing alcohol . More than a 5% mixture of 90% alcohol to distilled water is unnecessary to get records clean . Some claim alcohol strips vinyl of plasticizer , but I find no problem using low concentrations
Tried this method today and I’m really impressed! This breathed new life into my used records…so much of the surface noise and crackling are gone!! Thanks for showing how practical this is to do!
Hi Dean! Recently I got a used record online that was so dirty just a single revolution made my needle covered in god knows what gunk (thanks Japanese gentleman on eBay). So many videos online about how cleaning solutions online don't list their ingredients and probably aren't even using distilled water. Out of all the tons of research I did, you were the only one with a quick, clear, cost-efficient, and logically sound way to deep clean a record. While also protecting the inner label. So I went out to my local hardware store and got everything you listed. I used 91% iso, with a 1 to 5 part mix with distilled water. I bought two bottles with one being higher pressure to spray out the gunk, also the stain pad and OF COURSE your quite genius idea to use the glass suctions. They are perfectly sized for 12inch records 4 inch inner labels and keep them totally dry. Just finished my first cleaning on 4 records, and oh boy did it work. Literally fixed the problem album I mentioned, and my needle is happy and clean. Removed tons of nasty sounds and skips. Best method. I'm crowning it. It's videos like these that make youtube worth all the other garbage. Thank you!
@Jade-hf2yt my local hardware store, also I saw some in home depot. In the paint section usually. Not sure where you live but try Lowes, home depot, or local store. I'm sure Amazon has them too.
Tried this method out tonight after going to the hardware store to get some of the items suggested, very inexpensive . Excellent results, I watched tons of videos on cleaning, devices, etc. this particular one really resonated with me. Thank you.
Suction cups worked great! Thank you Dean. Here's what I used: 91% Iso Alcohol, generic Kroger brand rinse aid and filter water from our R/O system. Mainly cleaning off new records, so I went pretty light on the alcohol, like 10/1 water/alcohol ratio, and just drop of rinse aid. And a couple new microfibre cloths for washing and drying. I didn't have a drying rack like in your video, so I just used our bottom dishwasher rack for drying (left door open with rack pulled out) Worked perfectly. Clean records, sound great and no blood lost.
Straight and to the point, way to do it! For extremely dirty albums I would use Dawn dish detergent, rinse and then finish off with do it yourself vinyl cleaner. Dawn dish detergent removes what Gojo hand cleaner cannot after I get through turning wrenches. I think Dawn dish detergent might be able to remove contamination that alcohol is not able to remove.
I have been washing LPs under running water with soap for 40 years. Best & simplest way to clean. I was skeptical if the tile clamps at first, but now I LOVE them. Thanks for that tip!
There are so many ways. This video is refreshing because you are not treating the record like you are handling plutonium and babying it the way you usually see people do on UA-cam these days. I do a similar method and an old record I pick up goes from sounding drab to bright, full and clear. And I only buy old records...usually cheap.
I do the same method, little less alcohol. The paint pad follows the grooves perfectly. The suction cup idea is genius, gives a great way to hold. I finish the rinse cycle with a home made vacuum attachment.
@@markstropes1413 it shouldn't, the bristle are so gentle and follow the grooves perfectly. I use them on every record even brand new expensive ones and have not been dissapointed.
just inherited old records belongs to my late father, mostly music from the 80s & 70s..this video with so much vote confidence from other viewers made my day..cannot wait to starts cleaning those beauties..Thanks you so much Dean - Greetings from Kuala Lumpur
I've cleaned about 13 records as of now using this method, works like a champ. I omitted the drying rack, as I hit both sides of the record while still clamped with my garage air compressor which has two inline filters for moisture/oil first (this gets a lot of the remaining demin water off. Then I just use a microfiber towel, unclamp, try again around the label and the record is ready for an anti-static sleeve. Thank you.
I watched your video today, and with two recently purchased LP's in need of cleaning, I gave it a try. With a rock, or country LP it is easier to hide the snap, crackles, and pops, but on a classical LP you really can't. One LP was from 1961, and the other from 1962. Two basically 60 year old LP's. I followed your procedure, mixed the ingredients, and then did the washing. I let them dry as you did, took them to the turntable, mounted the LP on the platter, and when the stylus hit the LP probably 98% of the snaps, crackles, and pops are gone, and only heard between songs. Bravo on the video. It works. Thanks. Shalom.
Saw one person demonstrate cleaning records with a vacuum and I did not want to go that far. This is perfect, will definitely be replicating this set up for my records.
Your method is actually a very common method and everyone who does this method is satisfied. One very important and puzzling question that I even ask the pros who use expensive machines. This is for people who have been cleaning their records for at least 15 - 20 yrs. using Isopropyl Alcohol. What is the sound quality of your records? Have the grooves dissolved by using Isopropyl??? Far too many times it has been said to stop using Isopropyl as this eats away at the plastersizers in the vinyl. I would love to see a poll on this one. Peace.
It is a common method; I simply gave a concise presentation. I use no more than 10% Alcohol and rinse quickly and thoroughly. I haven't had any sound quality issues. Thanks for commenting!
The best way I found to keep records clean after cleaning them is to use a swiffer duster on my turntable mat prior to putting the first listen of every session. Cover or no, the platter will get dusty. Cleaning the platter first will keep the dust of the platter from getting on the back side of the record. Not sure about the alcohol, that could actually react with the vinyl.
just a little creativity can get you good results. ive seen peoples videos buy these huge expensive automatic machines for cleaning records but your here just using everyday items to clean records. thanks for the video man👍
I've cleaned thousands of vinyl records ....I put the grooves under a hot water faucet first ,then use the isopropyl ......great results !....angle the disc to avoid label wetness
Bro you are a genius. Best video yet. 👍! Going to try all this nxt wkend. Got hundreds of dj records needing good clning. Great video, 👌! Thank you so much. 👍👍👍!
Just inherited over 200+ records and they are all filthy so I am super happy to try out this cleaning method. I was wondering if you could tell me the stain pads (brand or anything) you used so I can grab some. All I am seeing online are the super padded microfiber ones. You're looks thin but can't seem to make it out from the video. Thanks!
0:58 is the stain pad that you use to scrub the record delicate enough to not make any kind of marks on the vinyl? With the pressure you're using when scrubbing by hand, I cringed thinking there's no way that that stain pad could be soft enough to make no marks at all.
Been using this method with great results. I just use a cleaner that I bought from my record store (it does contain alcohol) but everything else is straight from Deans recommendation.
Thanks for the 411! I did 20 of my vinyls tonight. Didn’t use the alcohol tho, I just use the cleaning solution that came with my brush kit and the records look very nice and clean…. Now for the 100 and something to go haha
The stain pad will not scratch the vinyl? I noticed that carbon fiber brushes can scratch a vinyl so is the pads 100% safe? Great video though my friend
I've been using the same paint edgers for 4 years. I keep them clean and wash them off. The fibers of the paint edgers are actually very soft and will not scratch the record.
One big concern among people that care, is to avoid any chemical that will remove the plasticizers from the vinyl, even in small ways. I have even heard of people using lighter fluid because it cleans well and leaves a shine , but an audiophile or collector sticks to proven record safe chemistry, avoiding shade tree stuff made from opinions.
Hi and greetings from the Netherlands 🇳🇱 I just found this video one year after you. What he says is : the first is few drops of dishwasher rinse aid. The stuff that you put in dishwashers to make your glasses shine. Then 10 ounces of the alcohol and then 15 ounces of the distilled water. 2 bottles. The first one is a normal spray bottle with the mixed cleaning solution, the second is a “high pressure” bottle with only the distilled water. Hope it helps.
well dean cook excellent where can you buy those centre holes suction holes where put on the label of the record where the label where wont get damaged.
I have heard ultrasonic cleaners can put holes through tin foil. I purchased a great sounding Jazz album from discogs and ask the owner what they did to keep the record in such good condition. They said they did nothing. No washing or cleaning of any type and it was an old record. About a year ago I scrubbed one old record with 190 golden grain alcohol. Does not seem to be damaged. I use Dawn dish detergent and a paintbrush on extremely dirty albums and follow it up with tergitol vacuum clean. I hate cleaning new albums but when I do it is usually with tergitol and record vacuum but some are so dirty I have to rinse them off under the sink first.
I like the vintage stuff too! My receiver is a 85 Akai aa-v105 and my friends old audio technical a turn table I don’t know the model and I don’t feel like picking it up and looking at the bottom of it if you know what I mean.
Plus I use a electric drill to dry them has to be a corded drill double nut 2 nuts on bottom place on lp nut an tighten nut. Just cut the head off a 1/4 inch bolt stick it in the shower spin for 1 minute. This will keep the grooves the right size make lps last longer!
Unfortunately, my LP collection was stored in boxes vertically for years. Naturally the end result is that they are warped, playable (the majority), but warped. Is there a way to straighten them out? Serious answers only please, I thoroughly understand that having them stored in that fashion wasn’t correct.
Good question! There's probably some good vids on how to do that. I've never tried. I may need to figure it out and do a vid on that as well. Please let me know if you find a good way to flatten warped records.
If you have a glass top table, ( one large enough in circumference to overlap the LP, & a separate sheet of glass,( ie. Perhaps from a 2nd table removed) upon a very clean surface of both sheets of glass, an equally clean {rediculously clean} record disc can be placed sandwiched between the two sheets. Secured w/some duct /high friction tape, & using a heat gun, hair dryer, or even a space heater gently, ever carefully, & in slow parts heat the vinyl to where it becomes pliable. I suggest bring it to heat, add a bit of pressure to the top sheet, & let it set for a few minutes, w/out removing it from glass visually inspect for warping, if you think it is good then there you go. If not repeat process, just remember that if it gets too hot, the groove, & audio is lost. The other option is if you have a physical record store, many have a device that does the same process as above, but w/ computer accuracy. Honestly the best way is avoid buying warped records if at all possible. The method above works, & if done properly there is no difference from a new, true, disc, just take your time, & aim to get it right. I hate my lack of punctuation, & the world's longest run on sentence, I seem to have employed there; but, whatever it happens
Murphey's oil soap works great and then if your record is really bad dry and follow with woodglue (only on the vinyl). It will pull all the dust out of the grooves when it drys and you pull it off. Plus, you get a woodglue version on your record.
you should not use any household detergents on records, will damage the vinyl. the alchohol and distilled water should be ok on their own, also only use a goat hair brush on records, anything else will damage them, i recommend Disco Antistat record cleaning tank made in Germany and Vinyl Shelter fluid made in UK.
The suction cups used in this video can also be had for around $20 on amazon, and I think it's quite ingenious because it offers a good grip to handle the record while cleaning. The acrylic label protectors are probably for less... aggressive scrubbing techniques, I'll say that, haha. But still, very useful information from both of you chaps. Many thanks!
Here's a hell of a better away of doing this. Get a disco antistatic cleaner use 1cup of 91% alcohol 3/4 a teaspoon of photo flow 200 and 3/4 of distilled water for fast drying. This will clean 15 lps in 15 to 30 minutes
Vanessa Whitney I use one as well prior to playing my records. I buy a lot of vintage vinyl that requires a deep clean. I do get fewer snap, crackles, and pops after a good deep clean. Thanks for watching and commenting!
Awesome. I like your style man. I literally Don't watch diy/audiophile videos if they're more than a certain time . CAN YOU TELL ME WHERE TO GET THOSE RECORD DRYING STANDS ???
They are made for file folders (Step holders). They come in plastic and metal...Make sure they are vinyl coated. You can find them at office supply stores, but I've found them at thrift stores for a buck apiece.
"When audiophiles get real" Wow alcohol, detergent, scrubbers, suction cups....just get a high presure water cleaner. Itll blast that dirt right off that vinyl.
Reading the comments I see there is concern about the 90% alcohol damaging the vinyl. I buy collections that are often stored in basements and garages, these collections need a deep clean. For you purposes you may want to change up the formula a bit - Try using 70% Alcohol and/or use less alcohol. Enjoy those records!
Isn’t the strength of the alcohol dependent on how diluted it is with water? What’s the difference between using 70% and 91% if you’re going to be diluting it in all that water anyway? If you’re worried about the ratios he used, why not just use a little less of the 91%?
I find 70 is not enough I’d say 91 + for a deep clean on some junky record you bought at a tag sale or a show
Stick with 90% isopropyl . The 70% may have other additives besides water , like emollients for rubbing alcohol . More than a 5% mixture of 90% alcohol to distilled water is unnecessary to get records clean . Some claim alcohol strips vinyl of plasticizer , but I find no problem using low concentrations
Tried this method today and I’m really impressed! This breathed new life into my used records…so much of the surface noise and crackling are gone!! Thanks for showing how practical this is to do!
“You don’t say much, but when you do, it’s straight to the point and I applaud you for it” great video man. Thanks
I don’t get it Big Dan
Hi Dean! Recently I got a used record online that was so dirty just a single revolution made my needle covered in god knows what gunk (thanks Japanese gentleman on eBay). So many videos online about how cleaning solutions online don't list their ingredients and probably aren't even using distilled water. Out of all the tons of research I did, you were the only one with a quick, clear, cost-efficient, and logically sound way to deep clean a record. While also protecting the inner label.
So I went out to my local hardware store and got everything you listed. I used 91% iso, with a 1 to 5 part mix with distilled water. I bought two bottles with one being higher pressure to spray out the gunk, also the stain pad and OF COURSE your quite genius idea to use the glass suctions. They are perfectly sized for 12inch records 4 inch inner labels and keep them totally dry. Just finished my first cleaning on 4 records, and oh boy did it work. Literally fixed the problem album I mentioned, and my needle is happy and clean. Removed tons of nasty sounds and skips.
Best method. I'm crowning it. It's videos like these that make youtube worth all the other garbage. Thank you!
Where did you find the stain pads?
@Jade-hf2yt my local hardware store, also I saw some in home depot. In the paint section usually. Not sure where you live but try Lowes, home depot, or local store. I'm sure Amazon has them too.
Tried this method out tonight after going to the hardware store to get some of the items suggested, very inexpensive . Excellent results, I watched tons of videos on cleaning, devices, etc. this particular one really resonated with me. Thank you.
Suction cups worked great! Thank you Dean. Here's what I used: 91% Iso Alcohol, generic Kroger brand rinse aid and filter water from our R/O system. Mainly cleaning off new records, so I went pretty light on the alcohol, like 10/1 water/alcohol ratio, and just drop of rinse aid. And a couple new microfibre cloths for washing and drying. I didn't have a drying rack like in your video, so I just used our bottom dishwasher rack for drying (left door open with rack pulled out) Worked perfectly. Clean records, sound great and no blood lost.
Straight and to the point, way to do it! For extremely dirty albums I would use Dawn dish detergent, rinse and then finish off with do it yourself vinyl cleaner. Dawn dish detergent removes what Gojo hand cleaner cannot after I get through turning wrenches. I think Dawn dish detergent might be able to remove contamination that alcohol is not able to remove.
I have been washing LPs under running water with soap for 40 years. Best & simplest way to clean. I was skeptical if the tile clamps at first, but now I LOVE them. Thanks for that tip!
what kind of soap did you use was it ordinary hand or wash it sunlight washing soap
@@MultiKs22 Ivory dish detergent.
I do the same.
Dawn dish soap for me
I’ve got the get the suction cups.
Thanks for the tip❤
There are so many ways. This video is refreshing because you are not treating the record like you are handling plutonium and babying it the way you usually see people do on UA-cam these days. I do a similar method and an old record I pick up goes from sounding drab to bright, full and clear. And I only buy old records...usually cheap.
After looking at many videos of how to clean Vinyl Records, this video is has the BEST method at the lowest cost. TWO THUMBS UP! 👍👍👍👍👍👍👍
I do the same method, little less alcohol. The paint pad follows the grooves perfectly. The suction cup idea is genius, gives a great way to hold. I finish the rinse cycle with a home made vacuum attachment.
Less alcohol isn’t a bad way to go. Thanks for watching!!
The whole paint pad idea scares me 😳
@@markstropes1413 it shouldn't, the bristle are so gentle and follow the grooves perfectly. I use them on every record even brand new expensive ones and have not been dissapointed.
One of the very best demos on UA-cam and believe me I've watched them all! Well done! Thanks.
Thank you very much!
just inherited old records belongs to my late father, mostly music from the 80s & 70s..this video with so much vote confidence from other viewers made my day..cannot wait to starts cleaning those beauties..Thanks you so much Dean - Greetings from Kuala Lumpur
I've cleaned about 13 records as of now using this method, works like a champ. I omitted the drying rack, as I hit both sides of the record while still clamped with my garage air compressor which has two inline filters for moisture/oil first (this gets a lot of the remaining demin water off. Then I just use a microfiber towel, unclamp, try again around the label and the record is ready for an anti-static sleeve. Thank you.
It would be very nice to hear a before and after applying these treatments to make a record better than new and reduce record noise.
Adrian Cressy Good idea. Maybe I’ll put a video together doing just that. Thanks.
Yes, that is an excellent point!
I watched your video today, and with two recently purchased LP's in need of cleaning, I gave it a try. With a rock, or country LP it is easier to hide the snap, crackles, and pops, but on a classical LP you really can't. One LP was from 1961, and the other from 1962. Two basically 60 year old LP's. I followed your procedure, mixed the ingredients, and then did the washing. I let them dry as you did, took them to the turntable, mounted the LP on the platter, and when the stylus hit the LP probably 98% of the snaps, crackles, and pops are gone, and only heard between songs. Bravo on the video. It works. Thanks. Shalom.
That is great to hear! Happy listening!
ah, the legendary oddboxtopper’s method with a twist of your own. respect
This is great! I buy a lot of thrift store records, and they are usually caked in dirt etc. This is the deep clean technique I need!
Saw one person demonstrate cleaning records with a vacuum and I did not want to go that far. This is perfect, will definitely be replicating this set up for my records.
It would be very interesting to hear a before and after test.
Try using 400 grade wet and dry paper, your vinyl will be perfectly clean and music free
🤔...😂🤣😂😉.
P80 is much more effective
Yeah, it'll put the S-M-O-O-T-H in smooth jazz.
you are insane😅
We have a Comedian😆✌️
Your method is actually a very common method and everyone who does this method is satisfied. One very important and puzzling question that I even ask the pros who use expensive machines. This is for people who have been cleaning their records for at least 15 - 20 yrs. using Isopropyl Alcohol. What is the sound quality of your records? Have the grooves dissolved by using Isopropyl??? Far too many times it has been said to stop using Isopropyl as this eats away at the plastersizers in the vinyl. I would love to see a poll on this one. Peace.
It is a common method; I simply gave a concise presentation.
I use no more than 10% Alcohol and rinse quickly and thoroughly. I haven't had any sound quality issues. Thanks for commenting!
This is terrific! Love the tile handling suction cup thingies! That's problem solving. Many thanks!
Honestly, I don’t mind sitting here watching long videos but this is quite interesting to watch you clean a record.
Thanks for watching!
The best way I found to keep records clean after cleaning them is to use a swiffer duster on my turntable mat prior to putting the first listen of every session. Cover or no, the platter will get dusty. Cleaning the platter first will keep the dust of the platter from getting on the back side of the record. Not sure about the alcohol, that could actually react with the vinyl.
Great idea!
Great point. And that stylus will be clearer.👍
Heading to Home Depot to get those suction cups! Great VID! Thanks!
Brilliance in just 4 minutes! So useful and effective (both the video and the technique). Thank you.
just a little creativity can get you good results. ive seen peoples videos buy these huge expensive automatic machines for cleaning records but your here just using everyday items to clean records. thanks for the video man👍
I've cleaned thousands of vinyl records ....I put the grooves under a hot water faucet first ,then use the isopropyl ......great results !....angle the disc to avoid label wetness
Thats what i used to do . get those tiny particles off of there first!
Suction cups, what a great idea!
Great video and really useful tips, thanks
Will you add links to everything you used please
Well done. Thanks for sharing. Best straightforward method I’ve seen!
Great VID! Where did you get the Drying Racks?
Do I have to use the actual paint edger or can I just use the pads? I feel like the edger outside peices will scratch it
Bro you are a genius. Best video yet. 👍! Going to try all this nxt wkend. Got hundreds of dj records needing good clning. Great video, 👌! Thank you so much. 👍👍👍!
Great idea; suction cups @ Harbor Freight (SKU 57499) for $4.39.
Just inherited over 200+ records and they are all filthy so I am super happy to try out this cleaning method. I was wondering if you could tell me the stain pads (brand or anything) you used so I can grab some. All I am seeing online are the super padded microfiber ones. You're looks thin but can't seem to make it out from the video. Thanks!
Hi Dean, great video with a simple technique, can I ask were to get the suction pumps please
0:58 is the stain pad that you use to scrub the record delicate enough to not make any kind of marks on the vinyl? With the pressure you're using when scrubbing by hand, I cringed thinking there's no way that that stain pad could be soft enough to make no marks at all.
Been using this method with great results. I just use a cleaner that I bought from my record store (it does contain alcohol) but everything else is straight from Deans recommendation.
Thanks for the 411! I did 20 of my vinyls tonight. Didn’t use the alcohol tho, I just use the cleaning solution that came with my brush kit and the records look very nice and clean…. Now for the 100 and something to go haha
Is “stain pad” just a sponge for painting walls?
The stain pad will not scratch the vinyl? I noticed that carbon fiber brushes can scratch a vinyl so is the pads 100% safe? Great video though my friend
I've been using the same paint edgers for 4 years. I keep them clean and wash them off. The fibers of the paint edgers are actually very soft and will not scratch the record.
Do you wash the edger off with distilled water or regular tap water? Thank you!
@@patrickouziel Plain tap water
We need one of those electronic microscope groove imagines before and after all these cleaning methods.
Straight alcohol is not a good idea!
One big concern among people that care, is to avoid any chemical that will remove the plasticizers from the vinyl, even in small ways. I have even heard of people using lighter fluid because it cleans well and leaves a shine , but an audiophile or collector sticks to proven record safe chemistry, avoiding shade tree stuff made from opinions.
Sorry, i'm portuguese and i'm not understagibg what is the first thing he wipes the vinil with, can you help
me? thanks
Hi and greetings from the Netherlands 🇳🇱
I just found this video one year after you.
What he says is : the first is few drops of dishwasher rinse aid. The stuff that you put in dishwashers to make your glasses shine.
Then 10 ounces of the alcohol and then 15 ounces of the distilled water.
2 bottles. The first one is a normal spray bottle with the mixed cleaning solution, the second is a “high pressure” bottle with only the distilled water. Hope it helps.
Finally a way to clean them without spending $1,000
well dean cook excellent where can you buy those centre holes suction holes where put on the label of the record where the label where wont get damaged.
Seeing cleaning methods that people use, make me glad I have an Audio Desk System Ultra Sonic cleaner.
I have heard ultrasonic cleaners can put holes through tin foil. I purchased a great sounding Jazz album from discogs and ask the owner what they did to keep the record in such good condition. They said they did nothing. No washing or cleaning of any type and it was an old record. About a year ago I scrubbed one old record with 190 golden grain alcohol. Does not seem to be damaged. I use Dawn dish detergent and a paintbrush on extremely dirty albums and follow it up with tergitol vacuum clean. I hate cleaning new albums but when I do it is usually with tergitol and record vacuum but some are so dirty I have to rinse them off under the sink first.
Can i use deionised water (used in car batteries) instead of distilled water?
Yes
Exactly the method I use, but with
much less alcohol
Thank you for the to the point video and all the great comments! I've subscribed!!
Nice tutorial what’s your system set-up like? I’m new to vinyl but have been an audiophile for 15+ years. Anything you recommend?
I run a 1972 Pioneer SX-826 Receiver with a 1976 Pioneer PL-1120 Turntable. I like vintage equipment.
I like the vintage stuff too! My receiver is a 85 Akai aa-v105 and my friends old audio technical a turn table I don’t know the model and I don’t feel like picking it up and looking at the bottom of it if you know what I mean.
Does this process work because I'm scared it will ruin the sounding of the songs on record?
It works. Change the formula if you like. Use 70% Alcohol and/or use less alcohol.
This is exactly why I went back to buying cds (haha).
I clean my records in the same way. I don't need a hundred's € machine's to that. With 500€ I buy a lot of records. Good video. 😁
Great video, direct and to-the-point. By the way nice ink on your arms!
Brilliant!
Sign me up!
Please carry on!!
Hey, where can I get those label protectors? Have you got a link to buy them somewhere?
It worked. Thanks a lot. Followed your instructions to the T. Much appreciated.
That's great! Thanks for sharing your results! Enjoy those records!
Ok, I'm off to the stores!!!
The crimes against fidelity are bloody hilarious on youtube.
Watched the video and went straight to Home Depot haha.
Do you not get noise on the first couple of playbacks after a wet clean, sounds like bacon sizzling?
No noise. the records always sound better.
For some reason this comment had me cracking up!
Well I am going to Lowe's tomorrow. Thanks! Good method.
The suction cups are a genius idea and i will be stealing it
Plus I use a electric drill to dry them has to be a corded drill double nut 2 nuts on bottom place on lp nut an tighten nut. Just cut the head off a 1/4 inch bolt stick it in the shower spin for 1 minute. This will keep the grooves the right size make lps last longer!
Unfortunately, my LP collection was stored in boxes vertically for years. Naturally the end result is that they are warped, playable (the majority), but warped. Is there a way to straighten them out? Serious answers only please, I thoroughly understand that having them stored in that fashion wasn’t correct.
Good question! There's probably some good vids on how to do that. I've never tried. I may need to figure it out and do a vid on that as well. Please let me know if you find a good way to flatten warped records.
Everything I've read says they should be stored vertically. Not slanting and not on top of each other
@@j.johnson2792 I agree. The probable reason they warped was due to excessive heat.
If you have a glass top table, ( one large enough in circumference to overlap the LP, & a separate sheet of glass,( ie. Perhaps from a 2nd table removed) upon a very clean surface of both sheets of glass, an equally clean {rediculously clean} record disc can be placed sandwiched between the two sheets. Secured w/some duct /high friction tape, & using a heat gun, hair dryer, or even a space heater gently, ever carefully, & in slow parts heat the vinyl to where it becomes pliable. I suggest bring it to heat, add a bit of pressure to the top sheet, & let it set for a few minutes, w/out removing it from glass visually inspect for warping, if you think it is good then there you go. If not repeat process, just remember that if it gets too hot, the groove, & audio is lost. The other option is if you have a physical record store, many have a device that does the same process as above, but w/ computer accuracy. Honestly the best way is avoid buying warped records if at all possible. The method above works, & if done properly there is no difference from a new, true, disc, just take your time, & aim to get it right. I hate my lack of punctuation, & the world's longest run on sentence, I seem to have employed there; but, whatever it happens
Google vinyl flat. Works very well. Just be careful and use some common sense or you'll overcook the album.
Best method yet. Thumbs up!
And woukd it ba safe to use a velvet rag on vinyls?
Velvet is very soft, not sure how durable it would be though. Test on a bad record to see how it performs. Let us know how it goes.
@@deancook3650 I purchased some coral velvet rags Amazon and am completely satisfied on how they clean my records
Except for applying force, these are the same materials used in cleaning aluminum coated telescope mirrors.
Pretty good system
Murphey's oil soap works great and then if your record is really bad dry and follow with woodglue (only on the vinyl). It will pull all the dust out of the grooves when it drys and you pull it off. Plus, you get a woodglue version on your record.
THE GOAT !!!!!!!!!!!!!! GREAT VIDEO
Hahaha, I love the idea of those handles, very good one ;--) thank you
I like your technique makes sense
I'm having a hard time finding the stain pad and holder.
you should not use any household detergents on records, will damage the vinyl. the alchohol and distilled water should be ok on their own, also only use a goat hair brush on records, anything else will damage them, i recommend Disco Antistat record cleaning tank made in Germany and Vinyl Shelter fluid made in UK.
Great vid, great ideas. Thanks.
For $20 or so you can buy an acrylic label protector on eBay. Works a helluva lot better/easier than those clunky suction cups.
Sounds good! Please share a link for all to check out. Thanks!
The suction cups used in this video can also be had for around $20 on amazon, and I think it's quite ingenious because it offers a good grip to handle the record while cleaning. The acrylic label protectors are probably for less... aggressive scrubbing techniques, I'll say that, haha. But still, very useful information from both of you chaps. Many thanks!
@@mikukumiku You can get them at Walmart for $5 each.
Very cool video, thank you....only potential problem is that "flexing of the record" you mention 2:45 could warp the vinyl. Proceed with caution!
It’s only a two minute video if you adjust the playback speed to 2x.
I was trying to figure out where the banana 🍌 comes into play.
What scrub are you using
Its a stain applicator that can be found at Home Depot or Walmart in the paint section.
Microfiber towel recommendation?
Nothing specific, but I do prefer the heavier ones as they wick up more moisture.
Thank you. Great video.
1:54 where to get such "holders" , Sir ?
great video, thanks!
Great video!
Great tips!
Here's a hell of a better away of doing this. Get a disco antistatic cleaner use 1cup of 91% alcohol 3/4 a teaspoon of photo flow 200 and 3/4 of distilled water for fast drying. This will clean 15 lps in 15 to 30 minutes
:)
Love it.
Great vid!!
great job, thank u
I hate when I run out of record cleaner solution.
Idk i just use a hand duster!
Vanessa Whitney I use one as well prior to playing my records. I buy a lot of vintage vinyl that requires a deep clean. I do get fewer snap, crackles, and pops after a good deep clean. Thanks for watching and commenting!
What are the staining pads made of?
Synthetic material. They do shed a bit, but not enough to be problematic.
Awesome. I like your style man. I literally Don't watch diy/audiophile videos if they're more than a certain time . CAN YOU TELL ME WHERE TO GET THOSE RECORD DRYING STANDS ???
They are made for file folders (Step holders). They come in plastic and metal...Make sure they are vinyl coated. You can find them at office supply stores, but I've found them at thrift stores for a buck apiece.
Fucking brilliant. Bravo sir
"When audiophiles get real" Wow alcohol, detergent, scrubbers, suction cups....just get a high presure water cleaner. Itll blast that dirt right off that vinyl.
And with any luck, it will blast the grooves & the music off of it too! ....lol