How to Replace Front Engine Mount 2007-17 Jeep Compass

Buy Now!
New Engine Mount from 1AAuto.com 1aau.to/ia/1AEM...
Engine mounts have rubber bushings to cushion and soften the vibrations of the engine for a smoother ride. When they wear out the engine and ride can start to feel harsh, especially when starting to move or shifting into drive or reverse. This video shows you how to install a new front engine mount on your 2007-2017 Jeep Compass.
• Check here for more videos on the 2007-2017 Jeep Compass: • Jeep Compass 2007-2017...
This process should be similar on the following vehicles:
2007 Jeep Compass
2008 Jeep Compass
2009 Jeep Compass
2010 Jeep Compass
2011 Jeep Compass
2012 Jeep Compass
2013 Jeep Compass
2014 Jeep Compass
2015 Jeep Compass
2016 Jeep Compass
2017 Jeep Compass
Tools you will need:
• Pry Bar 1aau.to/oa/1AXA...
• 3/8 Inch Air Impact Gun
• Jack Stands 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Jeep Compass 2007-2017 1st Generation: • Jeep Compass 2007-2017...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@JB-tz9pi]

what kind of jack is that?

[@davehair682]

Hi like you videos short & sweet & to the point - do you know why the Hole in the engine mount is quit a bit larger than the bolt ?- the bolt is around 10mm & the hole through the mount is 16.5 mm - any input is much appreciated .
PS. I asked Mopar & they didn't reply.
Thank you

[@TheXXxOblivion]

Could a bad motor mount be the cause of clunking whilst going over bumps/just accelerating on my 2016 Jeep? I’ve replaced struts, sway bar bushings, and the sway bar end links look great.

[@tsidebottom101010]

Same issue with wife’s Patriot. I suspect it to be the motor mounts as well. Have you replaced yours and had the issue resolved? Going to order some new mounts and install them in the spring.

[@chrissgarage2011]

I love this guy