Nice overview of the X7 transmitter. I am getting an X252 in a couple of days and your video helped me familiarize myself with the radio and provided some helpful information.
Just found this one, nicely explained and thanks for putting your settings in, I'm finally catching up on tweeks. Playing with the 250 racer and enjoying it. Thanks again for this one TTFN
Damn it, thought you wouldn't notice LOL Look at you over 12k subs, well done and well deserved, loving your latest flight vids, race and college ready, must be coming up soon now, or did I miss it?
Look forward to the race vids. Stay a kid as long as you can get away with it....well that's what I try to do LOL Enjoying Acro mode but so used to LOS I do struggle with FPV, just a case of practice I guess. You fly really well, guess I'm to used to Yuneecs do it all stuff LOL
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I was having issues with my k1110 and I finally understand this radio. Why??? For starters you speak English. Ha , keep these videos up, you keep people like me stay afloat on my own
Excellent information thanks!. I'm getting a x251 for my first quad it's perfect for what I want. I have flown a good few helicopters in the past, but hated the constant changing of batteries. Can't wait for mine to come. 😀 In the future I would love to get a DJI 3 standard but that's way out of my price range atm.
You the Man! Very big help. Before seeing all your vids, I just didn't feel like relearning all these things that gave me headaches, but now I totally want to go have my first flight with x252. I happened to have ordered whole bunch of LEDs and odd parts. I noticed that the antenna on the quad was noticeably longer than the required 3.12cm and was sitting on top of hot board. I will be doing something about this and make the LEDs more visible from bottom and top. Hope to share this with you guys soon. Thanks whole bunch!
Andrew Jackson R.I.P unfortunately, I have a couple of micro and one mini drones to mess about with for now till I can afford a phantom 3, there around 359 ATM can't beat that price for what you get that's for sure.
Good roundup man. Couple other titbits.. While on expo you can press left or right aileron to change just one side, if you don't input any aileron it will change both. Pcurve is indeed pitch curve (for helis) and while doesn't actually control pitch on a 3D quad, it does set your endpoints for 3D in a way along with the centre spot as there's no actual endpoint adjustment menu if you had noticed. It has no effect on a non 3D copter like the x252. The X100 is a little freaky in those regards as it has some mixing on the FC and stock X350 curves won't work for 3D on it as noted in the x100/x6 setup video I liked you on your x100 video. There's no reason to change it unless you feel power delivery is super uneven or want it less linear for some reason. The x6 is identical inside to the x7 and soon to come x8, it just has 2 un populated channel sockets you can plug things in to add features. No XK models will recognise the 8th channel yet but a simulator will or compatible Futaba RX. Swapping channels switches is as just plugging them in to a different port. I sitting here balancing the X252 props on the dubro and your were right, they do fit, kinda. Enough to take most of the wonk out of them anyway, thanks for that. I do have some vibes at higher throttle ranges and punchouts but not as bad as you did so hoping this helps. I got a full LoS flight in and about 3 seconds FPV as the lipo faded but the screen's feed is pretty jerky. I'm guessing yours was smooth as you didn't mention it but have you flown FPV with it past the little bit in your maiden video? Looking forward to seeing yours running smooth.
OK, cool. Thanks for the info! That is pretty interesting. Took the X252 for a few more flights today, and now I actually had a range problem all of a sudden one flight. This had happened to me once before, but while I had the shell open the antenna was flat against the board, so I lifted it up a little. Perhaps after crashes it got smushed down again. I melted a hole in the top and just pulled it up through, and now great range is back, interesting... If you can try it with just balanced props, and then the zip tie mod added in. The FPV feed is sometimes smooth, like when you are closer and better signal, but farther away it just get jerky, never seen one act like this, as when it is smooth it is actually really nice. Filmed and edited the camera test video today. So second (now working) flight video tomorrow, and then camera test video after that, and then the review probably, haha.
@RCA - nice overview. Pretty sure the P. Curve has no effect on the X251/252, and that it's for collective pitch heli's that use the same X7 controller. You can see the effect of the P. Curve on a collective pitch heli here: bit.ly/2dkiDw3 Also, when setting D/R values, it isn't explained anywhere, but you actually have to set a value for BOTH sides of each stick throw. For example, if you are setting D/R for Roll (slot #1, right stick, left/right throw), you have to choose left roll by moving the stick to the left, set the value, then choose right roll by moving the stick to the right and setting that value. If you check your TX, you might find the changes you have made previously only apply to one or the other stick throw which you can see by choosing a slot and moving the stick to one endpoint and then the other - if you see two different values, you have only changed one of the two throw directions. Cheers!
I am losing altitude and crashing on my bank turns with my x251. Don't know if I'm not giving enough throttle into the turn or too much yaw and it dives into the ground. Or do I need to adjust some setting on the transmitter?
Hi, have you tried using this transmitter for other flight controllers in Clean/Betaflight? I am trying to figure out how to set the auxiliary channels. Those switches don't register in Betaflight.
Hi, this is a very good radio I got this with my XKX 251 a while back, just wondering as its on the Futaba S-FHSS protocol whether its possible to set the switches if you purchased a futaba Reciever ? obviously for your various modes on a 5 inch quad using betaflight? :)
i have this transmitter with my xk A1200 plane. could you tell me which channel numbers are throttle, yaw, pitch and roll? just so i can figure out which channel number will equal my throttle, rudder, aileron and elivater.
Hi, I need your advice. have you or do you know anyone that uses the X7 on a flybar heli? I have this 450 flybar project and I will be using this radio. I have set 120 degree swashplate but I notice that CH6 PITCH does not move in tandem with CH1 AILE and CH2 ELE. I have tried 90 degree swashplate and it is the same problem. Maybe my question is a long shot but thanks if you can help me.
how do you bind this transmitter to XK models that do not have a bind button on them like the x380?? how would you bind to none xk models using futaba protocol? do you know which toggle is channel6???
RC, Did you change the rates for the X100? I'm having some difficulty dropping the gyro below 42. On throttle, motors spin up, cut out momentarily, then go again, usually then I crash.
My x7 won't change modes I bought a xk 100 on eBay came with x7 binds great but xk 100 has broke arm seller kinda misled but tx looks new but won't change modes ?any ideas
Hope you may be able to help. I just got the x7 controller with a whirlwind. When I turn it on, it starts beeping fast and doesn't stop. I noticed yours doesn't. Is this something you know anything about or is it possible it's defective?
Hi, and thanks for te great information ! Do you know how to use this transmitter in a buddy box configuration ? (set it up either as master or slave) . I know there is an "audio" connector on the backside, which can be used for that, but no more...
Hi, unfortunately I don't know about this :/ There IS a jack on the back that looks like it might be meant for that, but I am not sure if it works, or how so :/
Great video..i was searching for a manual or video to help me set up my X7 transmitter which i got with my X251 this video really helped.... I see that you can store different models on this but i am still not clear can you please share how you save different quads to different models (e.g. 251 to model 0 and 252 to model 8). Do you have to turn the transmitter on to a model first and then try to bind to a new quad and thus it saves to that model memory?
You just go into that menu and hit model select, and choose the number you want. I think it might go into auto bind everytime that turn it on, since even If I am in model 8, which is set up for the X252, I can bind to my X100, which I set up on model 0. It is just the radio settings and mixes that change really, so you can set up multiple profiles for different flying for one single model as well.
Sweet, like your vids. Do you know if I am able to get 3d mode on my TX? Came with x251 thinkinggg id be able to fly 3d.... "inverted", but it doesnt fly 3d. bs... Thanks!
I don't think the X250 can bind with the x7, because it's not on the real Futaba protocol like the x251-252 😕 I've tried this myself without any success 😑
I'm learning so much from your video on the X7. This teaching an old dog new tricks is a lot of fun (one month flyer, a couple months from 70, lol). So I'm not burning money in my quest to learn as quickly as possible, I'm trying to get set up to use a simulator with the X7. I saw fellow on youtube with bad videos use an audio cable between the back of the X7 and the mic input on his PC, SmartpropoPlus and the FPV Freerider App. I had an audio plug but it didn't work as I'm guessing I need a 4 position plug to access the mic function as my PC has a shared audio/mic input, if that makes any sense. Then I thought, can I get this working with an audio plug that goes into the X7 that plugs to the PC via USB and would there be any advantage to going that route? Do you have any info on exactly what that X7 analog port is supposed to be used for? Have you tried to run a simulator from the X7. Probably enough questions .
I decided to bite the bullet and by the RF Drone simulator. It might have a USB cable that will work with the X7 and it has its own controller to get some practice that doesn't break parts.
hi guys, my xk x251 as died on me the other day, i went to plug the battery in and heard something like sizzling noise coming from the plug in area where the battery plugs in, any ideas guys? i may have tried to plug it in the wrong way without realizing it.
probably.... BE AWARE, REAR SCEWS HOLDING THE LANDING GEAR BRACKETS ARE TOO LONG AND CAN DAMAGE TWO FETS OF THE ESC BOARD AS DEPICTED BELOW...you have to REDUCE THEIR LENGTH FOR SAFETY!!!!!
i wonder if you would demonstrate how to adjust the red button for video or not mine do not respond at all and so is my hold trotle button not responing I fly a plane a 1200
Did you ever figure out how to make the red video button work? I have the same problem that the button does not work. Been unable to get any help with this issue. Thanks.
Hi seudy! Yes i did figure out how to get the red botton to work but for the throtle hol it was never to work with the A1200 plane s' So if you want to see how to fix that red botton prob go to u tube under rober a capture 1 11 12 2016 and i do expain how to do it. I have also three flights recorded under rc plane. good luck
Not sure if there is a bind menu in here, but I was able to get it to bind to the XK X100 by holding the button on the X100 when I powered it up. I did bind it on a new model page.
Haha :D well even more stupid: I'll have 3 of them XK transmitters (and the one with the X100) in a while.. grrr.. I guess I should set the X500 up on my Futaba..
yeah why does the x252 come on model 8? lol.... also T- curve is set at 80% for a """reason""" just like the new version of the x251 it will SHOOT to the one side really bad on a punchout at 100% . on my 1st version x251 it will fly perfectly on 100%. T-curve
+The RCAddict no that's ok I'll just push all the buttons flip all the switches and spin the wheelie thingy something will happen I'm sure well it has in the past lol great vid very informative thanks for sharing
+The RCAddict These two quads use wl toys protocol. Not futaba S-FHSS. Thats why most people use x250 with trantula x6 transmitter. I also find some futaba S-FHSS receiver on banggood and gearbest. Since X6 and X7 are pretty decent transmitter, buying a compatible receiver with BNF FPV quads might save a few bucks. I havent seen anyone trying it yet.
If only you had one :/ Not bragging, but I am getting much better at 3D very quickly since I have it fixed now. I fly it as much as I can, it is so much fun.
Nice overview of the X7 transmitter. I am getting an X252 in a couple of days and your video helped me familiarize myself with the radio and provided some helpful information.
Glad I could help :)
Recently got an BNF XK X100 to practice flying acro and cannot overstate how much this video helped me setting up the transmitter for it. Thank you!
Glad it helped man! It makes the X100 fly very nice :)
This is exactly what I needed! Thank you
Just found this one, nicely explained and thanks for putting your settings in, I'm finally catching up on tweeks. Playing with the 250 racer and enjoying it. Thanks again for this one TTFN
Haha, creeping on old videos I see ;) ;)
Damn it, thought you wouldn't notice LOL Look at you over 12k subs, well done and well deserved, loving your latest flight vids, race and college ready, must be coming up soon now, or did I miss it?
Haha. Nah I am still a junior in highschool ;) Hehe, going to try and drive to some meetups or races this year. Sucks being a kid lol.
Look forward to the race vids. Stay a kid as long as you can get away with it....well that's what I try to do LOL Enjoying Acro mode but so used to LOS I do struggle with FPV, just a case of practice I guess. You fly really well, guess I'm to used to Yuneecs do it all stuff LOL
I meant about money and knowing people to fly with haha.
Very good overview of this transmitter my friend. And thanks for sharing.
And thank you for watching and commenting!
Thank you for this. I got mine yesterday and this has helped a lot.
Glad it helped Alex!
Great info video. Thanks for doing this kind of videos.
No problem Glen!
THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I was having issues with my k1110 and I finally understand this radio. Why??? For starters you speak English. Ha , keep these videos up, you keep people like me stay afloat on my own
Excellent video man! Thank you
:)
Hey great video thanks 😊 How many channels does this tx have? Must be more than 6 because of the camera?
Excellent information thanks!. I'm getting a x251 for my first quad it's perfect for what I want. I have flown a good few helicopters in the past, but hated the constant changing of batteries. Can't wait for mine to come. 😀 In the future I would love to get a DJI 3 standard but that's way out of my price range atm.
Glad I could help Dean :D
You the Man! Very big help. Before seeing all your vids, I just didn't feel like relearning all these things that gave me headaches, but now I totally want to go have my first flight with x252. I happened to have ordered whole bunch of LEDs and odd parts. I noticed that the antenna on the quad was noticeably longer than the required 3.12cm and was sitting on top of hot board. I will be doing something about this and make the LEDs more visible from bottom and top. Hope to share this with you guys soon. Thanks whole bunch!
Andrew Jackson I had my x251 for about 3 weeks or so, the wind took it to the graveyard in the sky.
Dean Parvin Did you get it back or did it dig a hole, to R.I.P?
Andrew Jackson R.I.P unfortunately, I have a couple of micro and one mini drones to mess about with for now till I can afford a phantom 3, there around 359 ATM can't beat that price for what you get that's for sure.
Can you change gimbal mode from 2 to 1? Docs? Thanks.
Good roundup man. Couple other titbits..
While on expo you can press left or right aileron to change just one side, if you don't input any aileron it will change both.
Pcurve is indeed pitch curve (for helis) and while doesn't actually control pitch on a 3D quad, it does set your endpoints for 3D in a way along with the centre spot as there's no actual endpoint adjustment menu if you had noticed. It has no effect on a non 3D copter like the x252. The X100 is a little freaky in those regards as it has some mixing on the FC and stock X350 curves won't work for 3D on it as noted in the x100/x6 setup video I liked you on your x100 video. There's no reason to change it unless you feel power delivery is super uneven or want it less linear for some reason.
The x6 is identical inside to the x7 and soon to come x8, it just has 2 un populated channel sockets you can plug things in to add features. No XK models will recognise the 8th channel yet but a simulator will or compatible Futaba RX. Swapping channels switches is as just plugging them in to a different port.
I sitting here balancing the X252 props on the dubro and your were right, they do fit, kinda. Enough to take most of the wonk out of them anyway, thanks for that. I do have some vibes at higher throttle ranges and punchouts but not as bad as you did so hoping this helps. I got a full LoS flight in and about 3 seconds FPV as the lipo faded but the screen's feed is pretty jerky. I'm guessing yours was smooth as you didn't mention it but have you flown FPV with it past the little bit in your maiden video? Looking forward to seeing yours running smooth.
OK, cool. Thanks for the info! That is pretty interesting. Took the X252 for a few more flights today, and now I actually had a range problem all of a sudden one flight. This had happened to me once before, but while I had the shell open the antenna was flat against the board, so I lifted it up a little. Perhaps after crashes it got smushed down again. I melted a hole in the top and just pulled it up through, and now great range is back, interesting...
If you can try it with just balanced props, and then the zip tie mod added in. The FPV feed is sometimes smooth, like when you are closer and better signal, but farther away it just get jerky, never seen one act like this, as when it is smooth it is actually really nice.
Filmed and edited the camera test video today. So second (now working) flight video tomorrow, and then camera test video after that, and then the review probably, haha.
@RCA - nice overview. Pretty sure the P. Curve has no effect on the X251/252, and that it's for collective pitch heli's that use the same X7 controller. You can see the effect of the P. Curve on a collective pitch heli here: bit.ly/2dkiDw3
Also, when setting D/R values, it isn't explained anywhere, but you actually have to set a value for BOTH sides of each stick throw. For example, if you are setting D/R for Roll (slot #1, right stick, left/right throw), you have to choose left roll by moving the stick to the left, set the value, then choose right roll by moving the stick to the right and setting that value. If you check your TX, you might find the changes you have made previously only apply to one or the other stick throw which you can see by choosing a slot and moving the stick to one endpoint and then the other - if you see two different values, you have only changed one of the two throw directions. Cheers!
Thanks:)
I am losing altitude and crashing on my bank turns with my x251. Don't know if I'm not giving enough throttle into the turn or too much yaw and it dives into the ground. Or do I need to adjust some setting on the transmitter?
Well I mean this not having a ton of power you are going to need to crank it on pretty hard.
Hi, have you tried using this transmitter for other flight controllers in Clean/Betaflight?
I am trying to figure out how to set the auxiliary channels. Those switches don't register in Betaflight.
I have only used it for the X252 and X100.Not sure if it can be used as a fully functional radio like that.
Thanks mate big help 👍👍👍
Hi, this is a very good radio I got this with my XKX 251 a while back, just wondering as its on the Futaba S-FHSS protocol whether its possible to set the switches if you purchased a futaba Reciever ? obviously for your various modes on a 5 inch quad using betaflight? :)
I honestly have no idea, haven't used it in so long :/
i have this transmitter with my xk A1200 plane.
could you tell me which channel numbers are throttle, yaw, pitch and roll?
just so i can figure out which channel number will equal my throttle, rudder, aileron and elivater.
I think it is AETR?
Hi, I need your advice. have you or do you know anyone that uses the X7 on a flybar heli? I have this 450 flybar project and I will be using this radio. I have set 120 degree swashplate but I notice that CH6 PITCH does not move in tandem with CH1 AILE and CH2 ELE. I have tried 90 degree swashplate and it is the same problem. Maybe my question is a long shot but thanks if you can help me.
Sorry but I don't really know much about the radio, or helis in general :/
nice video ! thanks for sharing
No problem!
how do you bind this transmitter to XK models that do not have a bind button on them like the x380??
how would you bind to none xk models using futaba protocol?
do you know which toggle is channel6???
I am not sure, I only ever bound the Xk X100 to it with the button.
You can find hole where inside is located the bind button...in xk251 model f.e....
RC, Did you change the rates for the X100? I'm having some difficulty dropping the gyro below 42. On throttle, motors spin up, cut out momentarily, then go again, usually then I crash.
I don't remember what I did, but I think I increased all the rates that moved the swashplate.
Hi. Will this transmitter work with a WL Toys V931 or V977 helicopter? Regards
I do not know what protocol those use so can't say :/
no
Hey I know this is a old video but I wanted to use this transmitter for my son with the trainer port on the back does it work??
Honestly have no idea :(
My x7 won't change modes I bought a xk 100 on eBay came with x7 binds great but xk 100 has broke arm seller kinda misled but tx looks new but won't change modes ?any ideas
What do you mean change modes?
Mines kinda weird ,u don't hold both buttons to adjust but did just hold mode it has some adj,but I want to know any other binding ,quads
What protocol does this use and do you know of any racequads that easily bind with this controller?
It uses Futaba FSHSS I think. If they use he correct Futaba RX they should, but I would just get a Taranis or turnigy evolution.
Hope you may be able to help. I just got the x7 controller with a whirlwind. When I turn it on, it starts beeping fast and doesn't stop. I noticed yours doesn't. Is this something you know anything about or is it possible it's defective?
Hmm, not sure really. Are all the switches it the back position?
Bingo! I thought I tried everything, just not that. I figured it was user error, but I guess not. Thanks
Awesome, really surprised I remembered that haha
Hi, and thanks for te great information !
Do you know how to use this transmitter in a buddy box configuration ? (set it up either as master or slave) . I know there is an "audio" connector on the backside, which can be used for that, but no more...
Hi, unfortunately I don't know about this :/ There IS a jack on the back that looks like it might be meant for that, but I am not sure if it works, or how so :/
NICE VIDEO! Also ''''That'''' guy that did a video similar to this one is a GENIUS....LOL \m/
Haha, thanks. ?"\m/"?
+The RCAddict. \m/=\../
samething..lol
the Metal Horns...LoL
Full Metal Heli Still don't really understand what that means, lol. ;)
+The RCAddict. lol ...its ok..
i thought you were doin Babymetal's fox hand sign??? lol
so does it have the settings for the xk x100 in it?? or do u have to change the model then set it yourself??
I would recommend a different model so you can adjust the curves.
Great video..i was searching for a manual or video to help me set up my X7 transmitter which i got with my X251 this video really helped.... I see that you can store different models on this but i am still not clear can you please share how you save different quads to different models (e.g. 251 to model 0 and 252 to model 8). Do you have to turn the transmitter on to a model first and then try to bind to a new quad and thus it saves to that model memory?
You just go into that menu and hit model select, and choose the number you want. I think it might go into auto bind everytime that turn it on, since even If I am in model 8, which is set up for the X252, I can bind to my X100, which I set up on model 0. It is just the radio settings and mixes that change really, so you can set up multiple profiles for different flying for one single model as well.
I see...thanks man
Sweet, like your vids. Do you know if I am able to get 3d mode on my TX? Came with x251 thinkinggg id be able to fly 3d.... "inverted", but it doesnt fly 3d. bs... Thanks!
I am pretty sure you can configure the radio to do so, but the ESCs and flight controller and not setup for that so I don't think it would work :/
The RCAddict aahhh yes I should have gotten the 252 damn! well I have an xk100 comin so at least I can practice some 3d with that. Thanks mane!
Andrew Dague Yeah, this binds right up the X100 and makes it quite nice to fly :D
Hi, maybe you know -- is there any rather "cheap" RX to buy and use with this? - thanks
I think it should work on any FSHSS capable rx, but I really don't know :/
Hi my x7 came with the a1200. Which flew away on second day now i use x7 for the x100 the right top switch doesnt kill my motors
hello, I tried to bind an X250 to my X7 remote controle without sucess, any suggestion please?
thx
I am not sure how to bind the X250 :/ Does it have a bind button on the board?
unfortunately no....
I don't think the X250 can bind with the x7, because it's not on the real Futaba protocol like the x251-252 😕 I've tried this myself without any success 😑
what other protocols is this tx compatabile with? will it work with dsmx dsm2?
It only works on the one, Futaba FSHSS one. Not Spektrum.
I'm learning so much from your video on the X7. This teaching an old dog new tricks is a lot of fun (one month flyer, a couple months from 70, lol).
So I'm not burning money in my quest to learn as quickly as possible, I'm trying to get set up to use a simulator with the X7. I saw fellow on youtube with bad videos use an audio cable between the back of the X7 and the mic input on his PC, SmartpropoPlus and the FPV Freerider App.
I had an audio plug but it didn't work as I'm guessing I need a 4 position plug to access the mic function as my PC has a shared audio/mic input, if that makes any sense. Then I thought, can I get this working with an audio plug that goes into the X7 that plugs to the PC via USB and would there be any advantage to going that route?
Do you have any info on exactly what that X7 analog port is supposed to be used for? Have you tried to run a simulator from the X7. Probably enough questions .
I don't know anything about that sort of stuff, I just plug my Taranis in with USB :(
I decided to bite the bullet and by the RF Drone simulator. It might have a USB cable that will work with the X7 and it has its own controller to get some practice that doesn't break parts.
my x7 won't bind to my x100 can you help me in any way thx RCAddict
Did you press the bind button on the X100 under the shell?
no but now found it now thx for getting back to me :)
hi guys, my xk x251 as died on me the other day, i went to plug the battery in and heard something like sizzling noise coming from the plug in area where the battery plugs in, any ideas guys? i may have tried to plug it in the wrong way without realizing it.
If you accidentally reversed the polarity bad things would happen for sure. Have you plugged it in correctly since then?
Yes I have tried it and nothing it's good as dead no lights no nothing
I believe I may haver blown something
GIB ROCK Yep, something definitely fried :(
probably....
BE AWARE, REAR SCEWS HOLDING THE LANDING GEAR BRACKETS ARE TOO LONG AND CAN DAMAGE TWO FETS OF THE ESC BOARD AS DEPICTED BELOW...you have to REDUCE THEIR LENGTH FOR SAFETY!!!!!
would this transmitter bind with a Hisky280 using DSMX/DSM2
No, this TX uses the Futaba protocol of FS-HSS not Spektrum on DSM2/X
Cool thanks for the info...just got my XK350 and the XK252 is on the way...Cant wait to fly
Is it possible to bind that transmitter withnanother aftermarket receiver?
In theory it should, but I am not sure.
I did this on my xk 350 and it won’t move lol u can hear the props spin . But it won’t go no where
thinking about the xk251 for first brushless quad. especially because of this remote.
Yeah, the remote is very versatile with the programming and compatibility with other models :)
thanks for that video. I just wonder if it goes with the x251 as well? I'm waiting for it.
It is in the thumbnail, title, and video ;) Haha, yes it does.
The RCAddict
Lol I saw that. Thanks again buddy. BTW I don't know if u ever saw "under the dome on CBS. You look like one actor from that show. 👍👍👍
I have never seen it, but from a search I am guessing you mean Colin Ford ;) haha
i wonder if you would demonstrate how to adjust the red button for video or not mine do not respond at all and so is my hold trotle button not responing I fly a plane a 1200
I do not know how to set switches up. Mine came pre setup for the XK X252.
tks for your response
Did you ever figure out how to make the red video button work? I have the same problem that the button does not work. Been unable to get any help with this issue. Thanks.
Hi seudy!
Yes i did figure out how to get the red botton to work but for the throtle hol it was never to work with the A1200 plane s'
So if you want to see how to fix that red botton prob go to u tube under rober a capture 1 11 12 2016 and i do expain how to do it. I have also three flights recorded under rc plane.
good luck
Yes just look at my video on roberta on utube I do explain how to fix this situation
can you tell, how to bind it to another quadcopter?
Not sure if there is a bind menu in here, but I was able to get it to bind to the XK X100 by holding the button on the X100 when I powered it up. I did bind it on a new model page.
and what button you was holding?
MrIgriX THere was a a little button on the X100 board.
Nice video... how the hell did you figure all that out... did they at least have a manual?
I don't remember exactly since it has been so long, but I am pretty sure that someone else had a video and I tried to refine it.
Anybody managed to convert gimbals setup to Mode 3? Thks.
hi could u help me how to setup X7 transmitter on XK K123
I don't know anything about that model. Is there a bind button on it?
This radio doesn't come with the X350 (it's an X6 TX) but yeah.. the programming is the same offcourse..
Multiple people told me it was the exact same remote, the X6, X7, and soon coming X8. I am not sure though, haha.
Hmm an X8? Ohw yes! The XK X500 comes with that one :)
2 more switches and the red button is gone. the X? nr is the nr. of channels offcourse..
DutchRC Adventures Oh, lol i'm stupid, didn't pick up on that, haha.
Haha :D well even more stupid: I'll have 3 of them XK transmitters (and the one with the X100) in a while.. grrr.. I guess I should set the X500 up on my Futaba..
DutchRC Adventures Yeah, you have Futaba gear, so it might be worthwhile to set it up.
will this work on my echine e129 and my echine e120 heli
skill issue lil bro
yeah why does the x252 come on model 8? lol....
also T- curve is set at 80% for a """reason""" just like the new version of the x251 it will SHOOT to the one side really bad on a punchout at 100% .
on my 1st version x251 it will fly perfectly on 100%. T-curve
Hmm, I had a couple issues at 100%, but I backed down to 90% and more power, without the issue :)
Ok i'll try that.. I just ended up putting it back to 80%
I got xk x251 had loose pin wouldn't power on something to cheek
Ok, thanks.
The name X7 reminds me of the Taranis Q X7. Wonder if they actually got that name from this transmitter :P
How to reset the X7 to factory settings?Thanks
I am not sure, since I don't have this radio anymore.
45Photo
45Photog did you ever find out how to reset your radio to factory settings
I lost you after hey guys what's up :-)
Sorry about that Peter :/ Maybe I can help here? I do talk pretty fast, but I have been trying to go slower. My first videos were REALLY fast, haha.
+The RCAddict no that's ok I'll just push all the buttons flip all the switches and spin the wheelie thingy something will happen I'm sure well it has in the past lol great vid very informative thanks for sharing
question is this control hase receivers or not
I don't think it has standalone ones no.
Cool.
Wish I could turn the bleep off at least whilst I was programming it!
Xk x250 and x260 are probably the two quads that didn't work with x7 transmitter I guess.
I think they would be compatible?
+The RCAddict These two quads use wl toys protocol. Not futaba S-FHSS. Thats why most people use x250 with trantula x6 transmitter. I also find some futaba S-FHSS receiver on banggood and gearbest. Since X6 and X7 are pretty decent transmitter, buying a compatible receiver with BNF FPV quads might save a few bucks. I havent seen anyone trying it yet.
Soe Min Paing Ahh ok, thanks. I just buy FrSky gear to use with my taranis.
For the people that have this quad congrats... For me... Ill just sit in a corner and cry.... 😫 because i don't have this quad...😞
If only you had one :/ Not bragging, but I am getting much better at 3D very quickly since I have it fixed now. I fly it as much as I can, it is so much fun.
Cant wait to see dem skills
Pity it does,nt have channel mixing.
:/
Can this transmitter bind with all futaba receivers...I have a Helimax 500 that needs a receiver and I have a couple of X7 and x6 transmitters. thanks
I am not 100% sure, but it uses the FSHSS protocol so it should be? I would ask to see if anyone has tried.
Does it say the battery level of the drone anywhere on the transmitter of only the controller?
no, there is no telemetry