XK Radio Binding & Programming Guide - Motion RC Extra
Вставка
- Опубліковано 12 жов 2017
- Pilot Ryan takes through binding and programming your XK Innovations Radio. Video table of contents and product links below:
00:26 - Binding your Radio
04:06 - Changing Models
05:20 - Channel Reversing
05:55 - Dual Rate
06:11 - Expo Settings
06:35 - Throttle Curve
07:23 - Gyro Settings
Find all our XK Innovations Products here: www.motionrc.com/pages/search...
Thanks for watching! Ask any questions you have in the comments. - Розваги
I can not say enough good for motion rc. Now I have only been with Motion for few weeks ordering helicopters and parts I have never been disappointed. Not to say it wont happen, But so far Very Impressed.
Thanks for the video I got one great shipping it’s such a nice scale heli
Wanna see these fly !
Mckaylund Tuttle we are working on them asap. But they have been around for a bit. We just started carrying them, but there is video of them flying out there to find
Thank's for the video it was extremely helpful. Although I do have a question. Where your x6 says 00 on the bottom right in the home screen mine displays 50. I have the k124.
Hey Ryan - Fantastic video thanks! 🌈 I’ve recently bought the XK K124 with X6 transmitter. Hell she’s twitchy lol. I’m not familiar with the X6, you said channel 4 is rudder. Which is pitch and roll?
I’d like to get the heli as docile as possible to start with. Maybe lower head speed, even less jerky on the dual rates, is that possible?
Is Gyro & Expo the same thing? Love your channel - suggestions PLEASE?? 👍🏻🚁
Just got xk k110. Was looking forward to it. Out of the box will not bind. Maybe I'm doing something wrong but my transmitter just keeps beeping constantly.
Hi! I recently bought an xk k124 helicopter rtf and I can't get it to enter in 6g calibration mode/ 6g flight debugging mode(as per manual) ?! When I pull both sticks of the transmitter all the way to the bottom position and hold them there, as I read in the manual and as I watched in online videos, nothing happens. I tried all the settings I could think of : in 6g, 3g, even 3d mode; with dual rates high and low, with different values for the dual rates - under, to 100% and above, with different throttle curbs,I have factory reset the transmitter, I have rebind the heli to the transmitter etc, nothing happens.
Can you get yours to enter 6g calibration mode?
Thank you!
thank you so much for this video, that was exactly what I need. of course you have a new sub. the only thing I didn't understand is what's the real difference from model 2, model 4, model 5,6,7, etc... I know only that model 1 and 3 are for airplane, model 2,4,5,6,7, etc are for helicopter. but what's the difference ?
Could you please help me with the gyro calibration I don't understand the the instructions manual.
I can't seem to find any videos of how to adjust the pitch - throttle curves .
can you please tell me how to program the xk7 so I can fly a delta wing on it?
Ryan with the model select does that mean you can have 10 different aircraft on this radio ?
Hippie 64 yes sir!
Hi question i wuld like to purchase a warlock 80 mini drone that has futaba protocol culd i use my xk x7 remote thanks
Thanks a lot my transmitter came incorrectly set from factory .
Your video totally help me. Manual is hard to understand.
having a problem with the EC145K124. Its beeping, when i hook it up i cant get the rotor to spin, it does show lifting but the rotor wont turn.....any suggestion on 1) why its doing this. 2) how to fix it.....tks in advance...Rick
will this transmitter work with xk k130?
Has anyone found any decent technical support for XK helicopters? I have the XK 130
What XK planes are bind & fly capable? I bough the XK a1200 because it came with the 7K transmitter 10 channel capable. The a800 the XK DHC-2 A600 are both planes I buy if they where bind & fly, most frustrating.
XK planes and helis run on several different protocols. The A600 runs on S-FHSS and can use this radio. The A800 runs on the different WLToys KN protocol. The A1?0 series 3-channel planes run on the WLToys V911s heli protocol which is different from the WLToys V911 protocol - but the V911s has been hacked lately so you can now set up a multiprotocol module radio to fly those. Have fun! ;-)
When is the binding process shown?
Hi i have a question.. can bind XK remote control for non-xk product
Only if it operates on the standard Futaba S-FHSS protocol.
I bought xk k100 it's flying at the 6g sideways why?
I have an issue now when I push the left stick up and engage the throttle for lift it is pushing the helicopter down. I do not know how to fix this. It is not in 3d all my switches are in the up position.
hmmm. have you tried reverse the throttle channel in the transmitter?
@@MotionRC The issue seems like it is in 3d mode pushing it down with the throttle in lower position and will climb after in the upper position of the throttle lever. The pitch and curve are at factory settings. This is after a replacement of the swash plate. No change to transmitter settings.
How do I reset the K6 radio?
Hi bro i want to say thanks for your time ,but i think i know understand what is going on,,,,I think that i have to put the heli on the grown then take off in witch mode that i want to fly in not so much in 6g but in arco mode or 3d thanks again
Cool man! Glad you got it sorted.
I was trimming out my XK-110 on the X6 transmitter and someone told me to never use trim adjustments with a flybarless helicopter. Is this true ?
Yes, the FBL unit will see it as a stick movement. To adjust the servos with an FBL heli, you have to adjust the subtrim.
My experience of these. Had 3 before giving up. The first would go into uncomfortable launch after a couple minutes. It got destroyed fairly quickly.
2 that don't bind so after £300 I'm done. Body kit has a part number but is not available. Junk.
I press and hold and nothing happens the red blinking light goes off and it won't fly
Not sure off-hand, try contact our customer service in the morning
What does the button behind the gyro button, do?
Fixed throttle speed I think. Blades spin at the same speed regardless of the collective stick position. If I remember correctly it is called Idle Up.
Can I bind my Blade Nano s2 to this transmitter ?
No. The blade uses a Spektrum protocol while these use a Futaba protocol
@@MotionRC ok,, thank you
Will this bind to a futaba 6ex fasst radio
antone silvia If the radio uses the Futaba S-FHSS protocol it should work.
Did I miss it or did you skip pitch curve altogether.? Totally the only reason i sat through this and I must ve missed it.
☠BLACK BARON☠ Can I have a Software/Firmware/Algorithm Update for the Gyro? I need more Roll to the Right for really beautiful scale like "curvy" right flights. I need more Roll Right °degrees ... More Right ... Left is okay to pretty much perfect, but Right is really missing some °degrees.
How many models can it store ?
10
Wouldnt it be great if someone created a reciever that binds to all the populare raidoes
Can't happen. Each protocol is its own patent and design. It would be worse for consumers if there was only one option because nothing would drive competition and the one option wouldn't need to improve and be accountable.
@@MotionRC I will say I do not find the idea 1 transmitter wrong, I do understand competition, the drive for all to better the transmitter also. As a hobbyist of XK, Wl toys, Sky rover, Eachine I do wish at times 1 transmitter, downside is all reaction would be same.
Is it possible to reset to factory after messing around or are the factory settings gone forever?
(Assuming you’re not writing them down lol) ✅
Recommendation do not fly after binding always turn off and on your equipment radio and heli because there can be problems were certain channels dont become active like my dx7s rudder won't work right after binding until after you reset it
What is gryo gain
Gain refers to the gyro correction sensitivity. If too high your aircraft would become wobbly as the gyro over corrects, if too low then it will barely be helping. Need to find the goldilocks spot
@@MotionRC thanks 👍🏽
I don't think changing that Gyro value to more than 75 makes any difference. It's the value to toggle between 3D and the assisted modes.
あなたの最初の誕生日プレゼントは何ですか？
Why do you use so many terms that normies don't understand?
Terms like what? Can you be specific? I can help you
Bind, trimmed, dead level neutral, works like katavo, subtrim, dual rate etc...I think everyone in the rc business thinks someone else has taught all their customers the basics. But I'm pretty sure you lose a ton of business making it all so far beyond new people or their parents.
@@akbarshoed these are terms that need to be learned anyway and there are tons of great help out there. But quickly "bind" refers to setting up communication between the Model and Radio through the receiver. "trim" are adjustments made to control surfaces to get it flying properly. "Dead level neutral" is dead level neutral, not sure how to rephrase that. Never heard of "katavo". "Subtrim" are smaller micro adjustments to the servos, a subset of trim. "Dual rates" are used to set up the model in multiple ways on a switch. So if you want the model to make sharper movements you set a high rate, if you want the model to be tame, you set a low rate. I apologize for any newbie that's watching this, but these are terms that will need to be researched. I will put it on my list of videos to make though for sure.