How To Install aFe POWER Toyota Sequoia Cat-Back Exhaust

Поділитися
Вставка
  • Опубліковано 15 лип 2024
  • Step-by-step installation you can do yourself. Learn more: bit.ly/47iwpZ2
    ⏩ Add dyno-tested gains up to +25 horsepower and +31 torque with this 2-1/2-inch-3-inch 304 Stainless Steel hand-welded piece featuring a high-flow muffler for deep sound.
    ⏩ Fitment:
    - Non-TRD & Other Models: Hi-tuck design (49-36069) afepower.com/afe-power-49-360...
    - TRD Model: Cut-out for exhaust tips that require TRD rear bumper (49-36068) afepower.com/afe-power-49-360...
    0:00 Intro
    0:12 Completing installation on a lift is recommended, otherwise, the rear section of the OE exhaust may need to be cut in order to be removed from the vehicle.
    0:15 STEP 1 Remove the OE Bolts and Springs at the front of the vehicle's exhaust. Retain the hardware; it will be re-used for installation.
    0:27 STEP 2 Remove the OE exhaust hangers from the isolators. Be careful not to damage the isolators.
    0:47 STEP 3 Lower the front of the OE Exhaust, then snake the exhaust's rear portion around the rear axle and remove it from the vehicle.
    1:05 STEP 4 Install the aFe POWER Y-Pipe onto the OE Catalytic Converter using the OE Springs and Bolts. Install the aFe POWER Passenger Side Front Pipe onto the aFe POWER Y-Pipe using the supplied 2-1/2" Band-Clamp. Do not fully tighten the band clamp to allow for adjustment.
    1:28 STEP 5 Install the aFe POWER muffler assembly with the supplied 3" band clamp and install the hangers into the vehicle's isolator mounts.
    1:46 STEP 6 Install the aFe POWER over-axle pipe with the supplied 3" band clamp and install the hangers into the vehicle's isolator mount.
    1:57 STEP 7 Install the aFe POWER connection pipe with the supplied 3" band clamp.
    2:05 STEP 8 Install the aFe POWER Tailpipe (For non-TRD models: Hi-Tuck Tailpipe- 49-36069 and for TRD model: Tip-assembly tailpipe- 49-36068) with the supplied 3" band clamp and install the hangers into the vehicle's isolator mounts.
    2:31 STEP 9 Start from the front of the aFe exhaust system and evenly tighten all clamps and fasteners.
    Hear it in action: • How To Install aFe POW...
    ⏩ Website: bit.ly/3D55liD
    Instagram: / afepower
    Subscribe to our channel @aFePower1
    ⏩ Questions?
    FAQs/Support: bit.ly/3OapjyU
    Email: info@afepower.com
    Call during business hours Mon-Fri 8am-4pm PT +1-951-493-7100
    ⏩ Get tech tips & product updates straight to your inbox: bit.ly/3NK7x3V
    #sequoiatrd #toyotasequoia2023 #toyotasequoia #trd #exhaustsound #installationguide #mechanictips #installationvideo #lexusgx470 #lexusgx460 #toyotatacoma #toyotatundra
  • Авто та транспорт

КОМЕНТАРІ •