DeWalt 3600 PSI Pressure Washer Honda GX200 no pressure
Вставка
- Опубліковано 7 вер 2024
- Pressure washer no pressure turned out to be a really easy fix.
I picked this up over the weekend in a package of store returns. All of them have issues but this is probably the easiest fix I've ever had. Turns out the key wasn't in between the engine shaft and pump.
DeWalt 3600 PSI
Honda GX200
AAA Simpson Pump
UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ua-cam.com/users/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.
I agree, a unit w/ a Honda GX200 is just about perfect size/weight and can do most jobs. However give me a Cat Pump or AR over the AAA :).
Welp, I really appreciate your video. Just received a BE 4000 PSI 4gpm washer today freighted in from Florida. From the factory the set screw holding the key down was missing and the key had worked its way lose so I was just getting hose pressure. Your video saved me a lot of time in trouble shooting and now I'll just be waiting on a warranty replacement part to come in.
Just started learning about all these power washer I bought on pallet and all of them had the same problem .
Thanks for the time to make the video
Where did you find them?
The spacer absolutely belongs there. All of these units have the spacer stock from factory. I have a tool store and have sold dozens of this model.
I have also seen a few where the key was missing from factory.
From what I know now I agree the spacer is stock from the factory. I believe it was used as an aid to prevent the key from being mis-installed. It doesn't hurt but isn't necessary. I've only seen this spacer on Simpson products or products Simpson manufactures for other brands. Thanks for watching.
At 1:53 you can see the KEY sitting on top of the bearing housing directly above the shaft. Another miss by the builder.
you forgot to take off that red cap for the oil airflow
Thank you! I was hoping someone else noticed that hahaha
You fixed my new Simson power washer. I returned it to Amazon and they refunded me but didn’t want the washer five months ago. I watched your video this morning and mine was the same. Thanks for the help.
The breather isn’t on there bud. That’s the first thing you do after taking out of box. Take that red cap off the top of pump and put the breather on. That’s why no flow is going through the pump lol.
That's the first thing I noticed! Why is this guy starting this machine with the red-cap on? 🤔This is the first thing to remove! Then he went all the way to dissemble the whole thing...LOL! 😂🤣
i bought a 3800psi dewalt. It was a return. The store manager told me that one guy came in the morning bought it and returned it late afternoon. He assumed he finished his job because his shoes were soaking wet. I think it was a 1000 pressure washer at the time. I got it for about 600. His excuse for returning it was to powerful
I'm surprised they took it as a return. It seems most gas powered equipment isn't returnable once you put gas in it, besides people using it to return a lot of repairs happen because of water in the gas, ethanol fuel. One of the best deals I got was I ordered a Simpson pressure washer from Amazon and it was non-returnable. it arrived damaged-the fuel tank was significantly dented in so I contacted customers service and they said since it was non-returnable dispose of it and they sent me a new one. The second one also arrived damaged...same exact damage to the fuel tank....they said if I keep it I'll get 50% off but the item would not be returnable and carry no warranty. I took the deal so I got 2 new Simpson pressure washers for 25% of the cost. Both worked just the tanks were smashed in and for something I bought new and paid full price for I wasn't going to let it slide w/o complaining.
@jamesbubnick homedepot has a no question return policy and people abuse it. I once bought a srhil chainsaw from Northern tool. I am certain the girl who sold it to me put straight gad in it. For one she didn't know what she was talking about. I told her the chain she was trying to sell me would not fit, but she was very certain it did. I was right the chain did not fit the bar. I had to go out and buy another elsewhere. The chainsaw also started to have problems starting after on the first gas that was put my northern tool. It would die out and eventually went dead so I lost $600. Bought it to the store and said they weren't responsible they even charge me to diagnose the problem.
You are supposed to replace the red plug with one with a hole in it for air
You are correct, It didn't come with the yellow one and I have to order it for customer service. I was waiting to see if I get a broken pump so I can steal the cap :)
The red cap is only for shipping.it is not the vent cap that was shipped with the machine. When I received my pressure washer the vent cap was missing and I had to order it from customer service. Do not use the machine with that shipping plug, you will severely damage the machine
Exactly. All these guys posting how they don’t work & they are so oblivuous
same problem. no pressure. the Key on mine was sitting at the bottom of the pump when i pulled it off.
I put it back in the right place and works now.
Also had the spacer in mine so i just took it out
I think the added the spacer to prevent the key from moving during assembly...but in reality it isn't necessary just a little more care when putting it together and higher tolerances would solve their issue. It's crazy to me they allow such sloppy assembly...
I just boted mine 3600 psi Dewalt brand new and it comes with that spacer
You’re supposed to take out that Red cap and put in the black oil breather part it came with.
You're 100% right. Thanks
You gotta watch those returns. I saw a guy that bought one at lowes and they had 'dolled up' and painted an old one and brought it in, switched stickers and all. He bought a $300 piece of crap.
I've seen some stuff like that. A few years ago I went to buy a 2" receiver for my truck and they had one that obviously was used...I took it to the counter saying I'll guy this if you give me a discount on it and they guy just looked at it saying he couldn't believe they accepted it as a return...
@@jamesbubnick My favorite is when you go to buy an aerator or faucet valve and you see an old crusty one in the packaging.
@@boriskarloff598 what's even worse is Delta and Moen warranty that stuff for life...all you do it email/call and they've been pretty good to get me new cartridges quickly.
I also have a brand new DeWalt 3600 psi washer with the same problem. Looks like I'll have to take it apart to get any work done. Common DeWalt.
Kinda crazy....I think I've had 3 of them with this exact issue.
it's probably that red screw top ur suppose to remove it an replace it with the one that it comes with
You didn’t see the woodruff key in a cavity above the shaft? All of a sudden you just a you saw a woodruff key on the ground?
That spacer ring is for the key to not back off the shaft while in use.
I didn’t see the woodruff key at first. The spacer is for assembly at their plant, it prevents an mis alignment of the pump to shaft from knocking out the key. Once installed the key isn’t going anywhere and the spacer is not necessary.
Red cap needs removed and air plug needs to go in there
Question I have the same machine and my keeps leaking water from the small orange looking valve that is next to where you hook up the water hose. Can you help why is it leaking ?
If you find out the answer to your question please let me know because my brand new machine is having the same problem. Thanks so much
This is the second video that I have seen of yours that the key is stick to the machine, after you pull the pump away....it is laying in there sideways.....you can see it if you watch it again....
Mine is not transfer the water to the gun. Needs an air release. It's brand new. How can I get the water to come from the water tank to the gun?
You need to let the water flow through the system. As long as you're getting water from a house hose bib it should have enough volume/pressure.
Put the spacer back on,it keeps key from sliding in off shaft!!
IQuestion I have the same machine and my keeps leaking water from the small orange looking valve that is next to where you hook up the water hose. Can you help why is it leaking ? And second question: I have connected the hoses, turned on the water and pressed the trigger of the gun to let out the air and get "a steady stream of water" but this is not happening even after minutes of holding the trigger. Please tell me what to do. Thanks so much.
Just buy one 3600 dewalt from Home Depot brand new....and it came with that spacer inside!
They must have added it to the assembly process. I believe they did it because keys were getting knocked out but it’s not necessary to install.
I got the shaft one time
a tip for when your spark plugs not finding its thread.. make one lol
Need to know how to remove starter pull rope on dewalt
What engine is used in the DeWalt dwpw3300? It says branded OEM 208cc engine. Is this the same as Honda gx200?
You still have the red factory plug in
You're right, I don't remember if I changed it to the vent plug or not. I probably did just forgot to show it.....
Im trying ti figure out whi mine is now pressurising. When I took off the pump. I had that same ring... My key was there but was portruding a bit.
As long as the key was in the slot it should be ok, you can also tell but running the motor and when you see the oil sight glass once it running the oil splashes around inside, and gets lighter because air is mixed into the oil.
No wonder there was an extra key in my box. The trash was never in there.
Great video, i learned alot, i have a question, some guy sold me a supposedly brand new 4400psi dewalt pressure washer. We need it to pump water out from a tank like our last pressure washer but it doesnt and only seems to work from a water source that already feeds with pressure. Basically it doesnt pump water out of a tank to the machine
Make sure water is running slightly wheb you the hose in, helps to push some.of the air out, youll burn it if you plug it in first then turn on the water. It will have air inside it and it wont push it out.
Hey bro how did you fix the other dewalt with the broken gasline? Because i got a simpson with the exact same model look as the dewalt with the broken i would like to know how you fixed it please
Good video. I have a Honda pressure washer is got pressure on the my motor but ones I install the hose and wan no pressure. Any idea? Thank you
if when you hook the hose up water isn't coming out of the pump I'd check the pump inlet filter, then check for clogs in the hose, gun and tips.
Perfek thak yu bro
Glad it helped.
But there was a 🔑 sitting above the the shaft hole
Hola amigo disculpa como se llama la parte donde va conectada la manguera de la segunda hidrolavadora la manguera que va al tanque tengo el mismo problema de la comp se llama esa parte para poder comprarla
It's the soap injector nipple, you can also by one that goes inline if the one on your pump is not working
So you expect to get as much money as a brand new one?. That's crazy. I'm always leery about buying anything from pallets when people ask as much as a brand new unit. I wouldn't pay more than 50% for such units. Some even have the orange sticker from home depot, which clearly shows they are returns.😅
Where did you buy these power washers from? They all came in a pallet from a wholesale distributer? I wanna buy some
How do you know when home depot has those returns ? Thanks
They really should just call it a Honda.
lol...The only thing really unique to any store bought pressure washer is the frame. It's just what price point the manufacture wants to target buy the engine/pump combination. I have had hundreds of units and the main reason they break is misuse. I've had very few that were actually worn out by use.
In your opinion, are the AAA pumps on these pressure washers good?
I bought a dewalt 4400 psi on offerup and it seemed pretty new. But im not sure if the pump was already broken and they patched it up. My question is, will a 4200 psi pump work properly or should i buy a 4400 psi pump?
AAA Pumps 90034 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 4400 PSI, 4.0 GPM, 1" Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Green www.amazon.com/dp/B01D4X0CCK/ref=cm_sw_r_cp_api_glt_fabc_3S8PJ0M818N8M3R0N3YF
This doesnt seem like the original pump I think its for a simpson but its all i can find as of now
The GX270 like this uses a 1 inch crankshaft. A 4200 pump should work fine. You might first want to take the pump head off to inspect the valves and seals as if those are fine it’s probably an unloader issue. Also the h loader on these are adjustable and you want to make sure it’s screwed in. It’d it’s screwed out you’ll get lower pressure
Do they sell keys for this separately. If so where can i find one.
They do, hardware stores will carry them, Ace usually has them and I think Home Depot/Lowes also does in the hardware isle. The keys are in different sizes based on the engine size so make sure you get the correct one. The correct key till fit snugly into the shaft. If it's too small of a key it will shear off.
How do you find the returns? I never see them at home Depot
I found someone on Facebook selling them. He bought store returns and if they had any issues he would resell them. I've never seen broken ones for sale at Home Depot and if they don't work they send them out for repair.
Another way to get broken ones is stop at a lawn equipment repair shop and ask if they are willing to sell the broken ones. A lot of time people decide against putting the money in the equipment and leave it. So the place gets a ton of equipment to keep.
I took my 4 bolts off and the pump wouldn't come off ....what am I doing wrong????
Depending on how old or the unit was stored the pump sometimes is rusted onto the shaft of the motor. I'd try to pry it off, I've also pounded a screwdriver to get pumps off and sometimes I'll hit the pump off with a hammer but it's usually hard to get one in because of limited room
Try hitting it lightly with a deadblow hammer
@@noahjagger3831 I found an end to the problem.....right into the damn dumpster
Great video! Question - my pressure washer turns on but no water or pressure is coming out of the hose, even with a strong flow of water connected to it. How should I troubleshoot?
What I do is run engine with out hooking up the trigger hose to observe pressure on pump .if choke is still on it will not be correct pressure. Is working hook up trigger hose and restart the unit to compare pressure coming out.
You have the wrong plug in there it should be a black one not a red one it needs to have a breather on it
Are you in Georgia
I'm in Central Illinois, I spent the summer of 2018 in Atlanta GA and what a beautiful state!!!
What size key? Mine is missing as well
it should be a 3/16 keyway, I'e found them at Ace Hardware or TruValue. One mine it was pinched on the motor side on the bottom, I bet yours is still there....
Yeah my Dewalt 3400 psi pressure is an absolute piece of shit as well. Pathetic.
In 36 seconds of this video I saw the problem. Dude forgot to read instructions. Take off red top and install breather.
This is called , " faulty customer " not faulty machine lol jk jk
That red cap tho 😒
I've got 3 DeWalt products and they are all junk. Including a pressure washer with a Honda engine.
The AAA pumps aren't the best but you can put on a higher quality pump on the GX200. If they are GC190's they aren't bad but not commercial grade.
That’s bullshit all of them have the spacer
I belive the spacer was added to the manufacturer assembly process later. I've had quite a few w/o....or it could have been a missed step. Anyways no matter what the key needs to be in the keyway otherwise it's never going to work. Thanks for watching.
This pump is trash