Just installed, I've now got intermittent hyperblink which is annoying, 2017 Tundra non led. I've found three options - repin the turn signal connector - shave the part in the relay under the dash for the turn signals - add resistors (not a fan of this AT ALL because they get super hot and are a fire risk) Can you comment?
Hey there! Sorry to hear you're having some issues. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
@@Live2dayWanderland Sorry for the delay in response. We were out of the office for the weekend! I responded to your direct messages with my solutions, but as always we recommend contacting our customer support team who is a lot better at resolving issues like these. You can refer to the comment above or access their contact info here if this is something you have experienced. Please give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com,
So if my truck came stock with halogen headlights there is no way to instsll an LED headlight with LED bars for the daytime lights? are there shops that can reconfigure the wiring to receive those headlights? Or am I just stuck with regular reflector headlights?
Hey there. This option is plug and play for all trim levels. No need to hire a shop to install. We include all the necessary adapters to bolt the lamp right up to your truck.
Where that 10amp fuse is in your video, we have a 75 amp in that spot? should I remove it or can I just plug your fuse connector into an open slot? Also see comments below, having an issue with the turn signals as others have mentioned below
Hey there! Apologies for the delayed response. We have seen a few issues with the turn signal, but have since introduced a new adapter harness to help correct this. If you've not already, please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. Thanks!
with these lights and new harness, can you keep the upper and lower beams on at the same time? meaning when you turn the bright lights ON will the low beams stay on?
Hey there! Our apologies for the delayed response. If you've not already, please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
No, but the high beams actually illuminate in front of you, instead of the stock highs that just put a spotlight a mile into the distance. Very usable, I’ve got them on my 2020 1794.
I have a question so I tried to set up my light but the running lights don’t turn on or even when I do the turn signal only the upper light turns on and the bottom doesn’t
I have the projector version that just came for my 16 tundra, and the white module connector came plugged in the back. Was this a mistake in shipping or the video instructions have a flaw?
Hey there! We aren't exactly sure what you mean. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. Thanks!
I got a tundra 15 it doesn’t have any led at the moment will I need to splice wires or connect anything to the fuse box for them to fill work as they should
No splicing necessary! Our headlights will plug right into your factory connectors, including the leveling motor. There is one fuse tap to enable the DRL, but you can see where to install it in this video!
@@formlighting hi there so I got my reflector headlight for my tundra and I installed everything the way it was supposed to but the only issue is now my truck won’t start but the lights seem to work properly how do I fix the issue
@@adonisjr1488 Sorry to hear that you are having some troubles! For all troubleshooting related inquiries, please send us an email at contact@formlights.com or give us a call at (636) 748-4444 Monday-Friday 10 a.m.-5 p.m. CST, and our service team would be happy to further assist you - thanks!
Hey Ruben! Sorry to hear you're having some troubles. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
NOTE: If your tundra has factory halogens, you need to use the reflector adapter regardless if you are installing the led reflector or PROJECTOR headlights. If you install the projector headlights without that adapter the blinkers won't work. ALSO if you have factory drl's and halogen headlights, you have to use the fuse tap for the form drl's to work.
Hey Kieran! These lights include an integrated manual adjustment screw on the back. We would recommend making final aiming adjustments before replacing the grille and other trim panels to make things a little quicker.
Thanks for not letting us know we’d probably need to adjust the beams. My pattern is not level. A tutorial would’ve been nice. Oh yeah, also, not reminding us to unhook the safety sense harness. Almost ripped that thing off the truck pulling the grill off.
Sorry to hear you are having so much trouble with this. Aiming your headlights is standard procedure for all aftermarket headlight upgrades. It is impossible to accommodate for all ride heights out of the box, and that is why we have built-in aiming adjustment screws. You will not have to remove anything to properly aim the headlights. Simply turn the screws out or in to raise or lower the beam pattern. If the stair step pattern is what is causing concern this is also intentional so that you do not blind oncoming traffic. The driver-side output should be lower than the passenger. a As far as the safety sense feature goes the vehicle that we filmed this install on did not include it so it was not noted in this video and I will pass the suggestion along to our team to revise this.
Just installed, I've now got intermittent hyperblink which is annoying, 2017 Tundra non led. I've found three options
- repin the turn signal connector
- shave the part in the relay under the dash for the turn signals
- add resistors (not a fan of this AT ALL because they get super hot and are a fire risk)
Can you comment?
Hey there! Sorry to hear you're having some issues. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
Did you ever get this resolved? just installed these and its the hyper blink in the cab and no actual turn signal working on the front new headlights
@formlighting what was the resolution to this?
@@Live2dayWanderland Sorry for the delay in response. We were out of the office for the weekend! I responded to your direct messages with my solutions, but as always we recommend contacting our customer support team who is a lot better at resolving issues like these. You can refer to the comment above or access their contact info here if this is something you have experienced. Please give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com,
So if my truck came stock with halogen headlights there is no way to instsll an LED headlight with LED bars for the daytime lights? are there shops that can reconfigure the wiring to receive those headlights? Or am I just stuck with regular reflector headlights?
Hey there. This option is plug and play for all trim levels. No need to hire a shop to install. We include all the necessary adapters to bolt the lamp right up to your truck.
Where that 10amp fuse is in your video, we have a 75 amp in that spot? should I remove it or can I just plug your fuse connector into an open slot? Also see comments below, having an issue with the turn signals as others have mentioned below
Hey there! Apologies for the delayed response. We have seen a few issues with the turn signal, but have since introduced a new adapter harness to help correct this.
If you've not already, please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. Thanks!
If The remaining connector on the adapter is not needed do I just leave it hanging there ?
I would recommend securing it to something using a zip tie if you can, but yes you are correct!
with these lights and new harness, can you keep the upper and lower beams on at the same time? meaning when you turn the bright lights ON will the low beams stay on?
I have this same problem where my lows and highs don't stay on at the same time when switching to highs
Did you ever figure out why bright and dim do not both stay on when on high? I am having the same issue. Bright lights are dimmer than dim.
I figured it out, had to pluck. The square black box relay, the video doesn’t mention or show it.
Hey there! Our apologies for the delayed response. If you've not already, please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
No, but the high beams actually illuminate in front of you, instead of the stock highs that just put a spotlight a mile into the distance. Very usable, I’ve got them on my 2020 1794.
Can we go ahead?
Not sure what you are asking?
Great video! You made it look easy.
Thanks for checking it out! 😎
I have a question so I tried to set up my light but the running lights don’t turn on or even when I do the turn signal only the upper light turns on and the bottom doesn’t
Like the running lights in general won’t work
Hey there! Did you route the included DRL harness that comes with these lamps?
I have the projector version that just came for my 16 tundra, and the white module connector came plugged in the back. Was this a mistake in shipping or the video instructions have a flaw?
Hey there! We aren't exactly sure what you mean. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. Thanks!
I got a tundra 15 it doesn’t have any led at the moment will I need to splice wires or connect anything to the fuse box for them to fill work as they should
No splicing necessary! Our headlights will plug right into your factory connectors, including the leveling motor. There is one fuse tap to enable the DRL, but you can see where to install it in this video!
@@formlighting and will that come with the headlights or will I need to purchase that separately?
@@adonisjr1488 It is included! You won't need to purchase any additional harnesses.
@@formlighting hi there so I got my reflector headlight for my tundra and I installed everything the way it was supposed to but the only issue is now my truck won’t start but the lights seem to work properly how do I fix the issue
@@adonisjr1488 Sorry to hear that you are having some troubles! For all troubleshooting related inquiries, please send us an email at contact@formlights.com or give us a call at (636) 748-4444 Monday-Friday 10 a.m.-5 p.m. CST, and our service team would be happy to further assist you - thanks!
They certainly look great. The stock halogen headlights in my Tundra are awful.
We appreciate the support! A truck like that deserves to have a nicer set of lights for sure.
It does, and at some point, I hope to be able to invest in a better set of headlights.@@formlighting
Just installed mine but the signal light now blink much faster did i did something wrong got a 2014 limited any help please
Hey Ruben! Sorry to hear you're having some troubles. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
Do you have the fog lights as well
Hey Erick! The fog lights on this Tundra are actually an SS3 Fog Light Kit from Diode Dynamics. Be sure to check them out!
NOTE: If your tundra has factory halogens, you need to use the reflector adapter regardless if you are installing the led reflector or PROJECTOR headlights. If you install the projector headlights without that adapter the blinkers won't work.
ALSO if you have factory drl's and halogen headlights, you have to use the fuse tap for the form drl's to work.
Do you know where I can buy the adapter? I don’t see it on Form website
@@SATRU24It should have come with the lights. If it didn't, I say to call and email them.
I did the fuse tap. I’m curious what fuse I took out to replace with the form fuse for DRL. Kind of worried it can cause issues
@allisonmaletta2351 The fuse tap replaces the 10 amp ignition fuse.
And that’s not needed ? Sounds wild to remove it no??
Just installed mine, seems like there is no way to access the adjustor screw with the lights installed....
Hey Kieran! These lights include an integrated manual adjustment screw on the back. We would recommend making final aiming adjustments before replacing the grille and other trim panels to make things a little quicker.
thank you
Do you sell taillights for 14-21 tundra?
Hey Zachary! Not at this time, but never say never!
Thanks for not letting us know we’d probably need to adjust the beams. My pattern is not level. A tutorial would’ve been nice.
Oh yeah, also, not reminding us to unhook the safety sense harness. Almost ripped that thing off the truck pulling the grill off.
Sorry to hear you are having so much trouble with this. Aiming your headlights is standard procedure for all aftermarket headlight upgrades. It is impossible to accommodate for all ride heights out of the box, and that is why we have built-in aiming adjustment screws. You will not have to remove anything to properly aim the headlights. Simply turn the screws out or in to raise or lower the beam pattern. If the stair step pattern is what is causing concern this is also intentional so that you do not blind oncoming traffic. The driver-side output should be lower than the passenger. a
As far as the safety sense feature goes the vehicle that we filmed this install on did not include it so it was not noted in this video and I will pass the suggestion along to our team to revise this.