Thank you so much! Just replaced all the bulbs to LEDs on my 2020 Tundra. Video was extremely helpful in making sure I didn’t crack any clips or anything.
Thank you so much for choosing PrecisionLED! We are so glad to hear that you are enjoying your LEDs. Please let us know if there is anything else we can do for you!
I just installed the complete interior kit plus the reverse lights. Such a big difference! Great video; this video is what convinced me to buy the kit from you guys.
About a month later and I'm really happy with the quality. The brightness and visibility is great when I'm deep in the desert and it's completely black outside.
Concerning the Foot Well Bulb, You can reach behind it (just press in your parking brake) and twist the socket, and it unlocks and comes out as if you were replacing a brake light bulb. No need for the tape method. If you have larger hands, the tape method is about impossible to do so just reach behind, twist/unlock the housing, and it just drops down for you. Pull out the bulb, and then lock it back into place.
Dang. I ordered a pack, not from you guys, and it didn’t come with reverse lights ;( now I gotta buy some. But I did use this video to help me install everything. Thank you and good vid.
I tried to follow your instructions now I have no interior lights because shit shorted out now I have to go to the dealership and give them my money. Folks have a professional do this!
Excellent video and I just sent you an email about a factory recall on the headlights for the Tundra. Seems that if you leave your high beams on for an extended time it could overheat the wiring/sockets setting your vehicle on fire! Not good...
I found it much easier for courtesy light to turn it and pull it out like you do for the license plate light. I could not for the life of me use the tape method for that particular one.
11:15 save yourself 15 minutes of aggravation and pinch the sides of the housing that holds the whole assembly and pop it out towards the license plate. The wiring harness needs to be pushed in very hard to seat properly and doing it while pretzeling your arm under the bumper is pretty difficult at least for me. Was immensely easier the second time around when I knew the truck above lol
Thank you for your interest. The Tundra does use a variety of sizes, as you can see in the video. The majority of the lights are a T10 fitment. If you are looking to purchase the entire kit, you can find it here: goo.gl/TSpcBQ However, just let us know if you are looking just replacement a few specific bulbs, and I can recommend the proper LED replacements.
I replaced all the lights on my 2020 Tundra Pro with this kit. While the lights are on inside my truck, my clicker won’t unlock or lock my doors. If you shut your door on the way out, you have to wait 15 seconds to lock it. They were awesome for a minute. It interrupts something in the shark fin antenna, signal or something. I put stock bulbs back in and my clicker works. I wish they would have worked, but I have to have my clicker. Not knocking the product, they’re great and bright, just didn’t work in mine. 😕
Outstanding video, planning on ordering the 5730 kit. Which color of LED bulbs were you using? Cool White or Crystal White? Thank you and keep up the awesome videos!
No, with our own hands on experience, we have never had any fuses blow when removing the halogen bulbs. Also, we have never heard of this reported with any of our customers.
I order same brand from Amazon and put it in my 2021Tundra it was working but after a few days it’s not working. Is there anything I need to do? Any ideas please reply back
The new Premium 360 LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 360 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 360 LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior LEDs are backed by our lifetime warranty.
As you can see in the installation video, the process is very simple, so most of our customers perform their own installation. However, you can take our LED kit to any auto shop and they should be able to install for you. You can find the correct interior LEDs for your 2019 Tundra here: www.precisionled.com/toyota-tundra-premium-led-interior-package-2014-present.html?
I was trying to remove the bulb on the 3rd brake light/cargo light and it broke at the base, any ideas of how to remove it. This is on my 07 Tundra. Thanks in advance for any help/suggestions
Noted! We will try to do a comparison video or photo in the future. If you'd like to see an example of the 8000k, it is not a side by side comparison but in this video we installed the 8000k: ua-cam.com/video/6n-RikDpWos/v-deo.html&lc=UgzBEPP2hV7Kel_QUOx4AaABAg
What's the point? Super bright interior lights will ruin your NIGHT VISION, which you need to drive safely. Super bright headlights will do the same to other drivers. To be honest, since some can't seem to restrain themselves (common sense & courtesy), these lights should probably be banned in vehicles - and/or manufacturers held liable.
Dwight Stewart well your opinion but leds are here to stay. lots of manufactures are using it the old bulbs are getting replaced I welcome the change .
Dwight Stewart I can Challeng that opinion but it’s not very factual and many people including myself disagree with you . I have factory leds headlights soo much better vs the pos halogen
Four years later, and this is still a perfect video.
Thank you!
AustinPaul - Texas
Thank you for the kind words!!
Easiest install ever. Great video. Great product. Stoked about the results.
Thank you so much! Just replaced all the bulbs to LEDs on my 2020 Tundra. Video was extremely helpful in making sure I didn’t crack any clips or anything.
We are happy to help!
Thank you for this video. The duck tape helped so much!
Just purchased the 3D lights. It is literally like night and day! Very pleased. Quality products!
Thank you so much for choosing PrecisionLED! We are so glad to hear that you are enjoying your LEDs. Please let us know if there is anything else we can do for you!
Just ordered my replacement kit. This video is awesome!
Just got my new use 21 TSS Tundra. Very helpful video.
Excellent video. I followed it exactly and had no issues at all.
Glad to hear! Thanks for the support!
I just installed the complete interior kit plus the reverse lights. Such a big difference! Great video; this video is what convinced me to buy the kit from you guys.
Robert Moore
Am about to order the premium kit, how you like the quality?? I feel its kinda pricy vs other brands.
About a month later and I'm really happy with the quality. The brightness and visibility is great when I'm deep in the desert and it's completely black outside.
Thank you for your comment and also for the update! We are always so happy to hear from satisfied customers.
Great video !!!
What sells me is seeing the comparison !!!
Just got mine installed! Awesome product
Thank you for the support!
Thanks for the tape trick. No way was I getting the bulbs out without it.
This video is bad ass! I can’t wait to update all my lighting on my tundra.
Thanks! We hope it went smoothly!
I Just installed looks 10xs better thanks Precision LED 👍👍
2019 Tundra Limited Crewmax
did you use the 8000k or 6000k?
Glad to hear! Thanks for tuning in!
Thanks for sharing, after watching I did the same to mine and what a great change.
Thank you for watching!
Cool video where I can buy this lights ?
excellent video! Very descriptive and helpful. Easy to understand each step. Loved the diff camera angles
Thank you for the support!
Concerning the Foot Well Bulb, You can reach behind it (just press in your parking brake) and twist the socket, and it unlocks and comes out as if you were replacing a brake light bulb. No need for the tape method. If you have larger hands, the tape method is about impossible to do so just reach behind, twist/unlock the housing, and it just drops down for you. Pull out the bulb, and then lock it back into place.
Thanks for your input!
Dang. I ordered a pack, not from you guys, and it didn’t come with reverse lights ;( now I gotta buy some. But I did use this video to help me install everything. Thank you and good vid.
Thank you 👍🏼 would have definitely broke a couple clips trying to open the lights
what a difference thanks for the tool!
You have the best work out of anyone good job continue it.
Alan Shcher
Thank you so much. We really appreciate your support!
I tried to follow your instructions now I have no interior lights because shit shorted out now I have to go to the dealership and give them my money. Folks have a professional do this!
This is awesome! Thanks for the help.
Thanks for tuning in!
After installing the LED's, have you had any electrical issues? I've read that some people have electrical issues with their starters, etc.
Excellent video and I just sent you an email about a factory recall on the headlights for the Tundra. Seems that if you leave your high beams on for an extended time it could overheat the wiring/sockets setting your vehicle on fire! Not good...
Very well presented and articulated!!!
Thank you for the kind words!
Thanks for the excellent instructions
Thanks for watching!
I found it much easier for courtesy light to turn it and pull it out like you do for the license plate light. I could not for the life of me use the tape method for that particular one.
Nice! Whatever works for you! 😎
nice video im getting all led for my tundra starting with interior those are pretty yellowish
It is a very attractive upgrade from the stock halogen bulbs!
11:15 save yourself 15 minutes of aggravation and pinch the sides of the housing that holds the whole assembly and pop it out towards the license plate. The wiring harness needs to be pushed in very hard to seat properly and doing it while pretzeling your arm under the bumper is pretty difficult at least for me. Was immensely easier the second time around when I knew the truck above lol
Thank you for the advice!
Love ❤️ this video hey I was wondering what kind of bulk would fit my Toyota Tundra 2019 or are they different where can I buy them?
Thank you for your interest. The Tundra does use a variety of sizes, as you can see in the video. The majority of the lights are a T10 fitment. If you are looking to purchase the entire kit, you can find it here: goo.gl/TSpcBQ
However, just let us know if you are looking just replacement a few specific bulbs, and I can recommend the proper LED replacements.
PrecisionLED I want to just change the inside only
I replaced all the lights on my 2020 Tundra Pro with this kit. While the lights are on inside my truck, my clicker won’t unlock or lock my doors. If you shut your door on the way out, you have to wait 15 seconds to lock it. They were awesome for a minute. It interrupts something in the shark fin antenna, signal or something. I put stock bulbs back in and my clicker works. I wish they would have worked, but I have to have my clicker. Not knocking the product, they’re great and bright, just didn’t work in mine. 😕
Actually, we believe we found a solution to this issue! Checkout this video for details: ua-cam.com/video/8ttHd9mcJ0k/v-deo.html
Outstanding video, planning on ordering the 5730 kit. Which color of LED bulbs were you using? Cool White or Crystal White? Thank you and keep up the awesome videos!
Thank you for your interest. The color used in the installation video is the 6000K color temperature.
Thanks for cool video🍺🍺
Do your interior leds pulse or flicker when dimming?
Very informative.
Thank you for the positive feedback!
My tape keeps melting when I try to swap out the footwell bulb. 😅 haven’t been able to change it
Very nice.
Thanks!
Ever had the issue of the lights blowing fuses? Seen most other led kits doing this.
No, with our own hands on experience, we have never had any fuses blow when removing the halogen bulbs. Also, we have never heard of this reported with any of our customers.
Mine blew buying cheap ones from Amazon, precision led is the best, no blown fuses with them
great video
Saved me a ton of guessing bra. Sweet !
Glad to hear!
Nice video and well detailed! With nice and slow instructions.
Thank you for the positive feedback!
Please do 2012 Honda CRV Or 2007 Honda Accord would really help thank you so much
Thank you for your interest. We do have a video for a 2012-2016 CR-V: www.precisionled.com/how-to-videos/honda/honda-cr-v-2012-2016.html
Awesome tutoria!!l , will be trying this out on my truck
Thanks for watching!
This fella moves a lot quicker than old fred.
Haha, thank you for tuning in!
Why doesn't the kit come with bulbs for both vanity mirrors? Mine only came with one set.
Our LED kits come with 4x vanity mirror bulbs, 2 for each mirror.
Very good job
Thank you for watching!
thankkk you
Thank you for tuning in!
Where can I buy some of these led lights?
Longevity Vanish amazon bro
Hi! You can find the direct link in the description box below the video!
The reverse lights don't need resistors?
Nice video. Thanks
Thank you for tuning in!
I order same brand from Amazon and put it in my 2021Tundra it was working but after a few days it’s not working. Is there anything I need to do? Any ideas please reply back
Hi! Please reach out to our support team directly at help@precisionled.com!
Does anyone know if the lights highlighted in this video are the 6,000k or 8,000k lights?
Thank you for your interest. The 6000K color temperature is installed in the video.
What is the difference between standard and premium?
The new Premium 360 LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 360 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 360 LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior LEDs are backed by our lifetime warranty.
Is that am entire kit or do i have to purchase each led separately?
The entire kit is linked in the description of the video.
What LED bulbs were used for the vanity mirrors?
For this installation we used a 29mm festoon, which you can find here:
www.precisionled.com/festoon-29x5mm-2-smd-led.html
what are the trunk bulbs listed as an ooption in this package?
The trunk bulbs would be the truck bed lights. I apologize, as I understand it can be confusing.
PrecisionLED
Is it same as cargo lights? Or this is different light in late models? Mine is 2014 crewmax.
Good
Thank you!
Nice vid.
Thanks for tuning in!
What size bulb is drivers foot pedal area led?
The foot well light would be a T5 which you can find here: www.precisionled.com/t5-3-ssmd-led.html
Are these cool white or crystal white?
Hi! These are crystal white, 6000k.
Where can i get a box of those lites
Here is the link! goo.gl/TSpcBQ
Where do you get those led light from i want the want goes under driver side
You can purchase the footwell LED directly from our website via the link here: www.precisionled.com/t5-3-ssmd-led.html
Why dont it have a passenger side foot well light? Can one be installed, 19 tundra.
The Tundra only has a single footwell light, which is on the drivers side.
I would like to do this to my 2019 Tundra but where do I buy the LDL ? Who can help me Install
As you can see in the installation video, the process is very simple, so most of our customers perform their own installation. However, you can take our LED kit to any auto shop and they should be able to install for you. You can find the correct interior LEDs for your 2019 Tundra here: www.precisionled.com/toyota-tundra-premium-led-interior-package-2014-present.html?
PrecisionLED thank you
just did this install....before watching this. I ended up pulling the metal shrouds out, they bent and could not get them back in. oh well.
I was trying to remove the bulb on the 3rd brake light/cargo light and it broke at the base, any ideas of how to remove it. This is on my 07 Tundra. Thanks in advance for any help/suggestions
Will this kit work for a 2019?
Yes, the kit listed in the description, and installed in the video, is compatible with the 2019, as the bulb types are the same.
Are there LED’s that are not as bright
My 2020 tundra got the fuse blown after installing the led lights
We are sorry to hear that! Did you purchase your LEDs from us? If so, please reach out to us at help@precisionled.com!
Are these the 6k or 8k LED's (Interior) ?
Thank you for your interest. The 6000K color temperature is installed in the video.
I get the 2020 work package tundra but would like this LED LIGHTS ...de question is , can I use the same LED LIGHTS on the 2020 tundra?
Yes, it is compatible with your 2020 Tundra!
Are these Crystal White or Cool White?
The crystal white 6000K LEDs are used in this video.
Would this work with 2020 tundra sport?
Yes, it is compatible with your 2020 Tundra Sport!
Are these 6000k or 8000k??
According to their site you can get the kit either way 6000K or 8000K, hope this helps.
Thank you for your interest. The 6000K color temperature is installed in the video.
Anyone have issues with blowing a fuse during installation?
Will this work on a 2019
Yes, the installation process would be identical for the 2019.
Will it work on 2010 it looks exactly the same?
Thank you for your interest. Yes, the installation process for the 2010 Tundra would be very similar, if not identical to as shown in the video.
What color are these?
In this video we installed the 6000k color temperature. We offer two color options, 6000k crystal white and 8000k cool white!
@@PrecisionLED thanks. It would be nice to see a comparison of the 2 in the truck
Noted! We will try to do a comparison video or photo in the future. If you'd like to see an example of the 8000k, it is not a side by side comparison but in this video we installed the 8000k: ua-cam.com/video/6n-RikDpWos/v-deo.html&lc=UgzBEPP2hV7Kel_QUOx4AaABAg
@@PrecisionLED just purchased the cool white 8k for my 2021 tundra. Thanks for the great video and making it easy
Thank you so much for choosing PrecisionLED. We appreciate your business and hope the install goes smoothly!
need to do a chevy traverse LT
Thank you for the suggestion. We will keep an eye out for a Traverse out here in Los Angeles for a video shoot. Subscribe for updates!
Should have watched this video first. I messed my outlet up
Man, those bright lights would ruin your night vision, which is not something you should want while driving.
They’re not meant to be turned on while you’re driving
The footwell light don't fit
Did you purchase your footwell light from PrecisionLED? If so, please reach out to us at help@precisionled.com!
What's the point? Super bright interior lights will ruin your NIGHT VISION, which you need to drive safely. Super bright headlights will do the same to other drivers. To be honest, since some can't seem to restrain themselves (common sense & courtesy), these lights should probably be banned in vehicles - and/or manufacturers held liable.
Stupid reply leds are the gold standard now on Lexus
@@tundrav8georgia .. Doesn't change a word I said.
Dwight Stewart well your opinion but leds are here to stay. lots of manufactures are using it the old bulbs are getting replaced I welcome the change .
@@tundrav8georgia .. You welcome the change despite the issues I mentioned? Are they really worth the risk to you and others?
Dwight Stewart I can Challeng that opinion but it’s not very factual and many people including myself disagree with you . I have factory leds headlights soo much better vs the pos halogen