I've used this stuff on my 2017 Alfa Romeo Giulia and my dad's 67 E type. No issues on either car. I know it works as I did a test on the trunk of my Alfa before tackling the entire car. When I washed the car off after the test area the soap was sliding off the trunk surface. I will be applying this to all the cars I own and look after. To each their own. I love it, you hate it. Fair enough.
Ya he totally applied it wrong both times when he could have literally followed the actually instructions. Feel like an excuse to purposely set it up for failure but made the time to review again so can't blame him 🤷♂️
I’ve used it three times and watched the proper way to apply it in between and still it won’t come off right. I also use it on black cars so anything that’s not coming off is much more noticeable then a grey, silver or white car
@@jt9264 I gave 303 Graphene Nano and have been using that for the last two years. It is the best stuff that I've come across for the money. It typically lasts for 3-4 months.
Directions-"we recommend allowing 1-2 minutes before removing" Detail dude- 30 sec later "alright now I'm going to begin buffing" This has to be a joke, the way you applied the product reminded me of the first time I put wax on my first car. Slow no movement, you have to spread the product and work it in. Not glide across the surface in streaks. I used this product last month and people though I painted my car. It's an 2001 with black paint. 10/10 product and you use almost none of the bottle for a full car, the bottle should last for years....
The reason they say to leave it on for 1-2 minutes is to make sure it lays smooth. The ease of removal doesn't change dumb ass. If you have actually used the product, you would know this. You don't have to spread or work this product in, that literally does nothing for it LMFAO
@@VividTape Wrong, the wait times is necessary so the product can dry! Allowing the residue left behind to be buffed or wiped off easily. Not waiting leaves you with the un-evaporated solution that allows you to spread the product. Resulting in a "tough buff" situation. I have used the product, in fact I used it before this video popped up on my feed...my paint is 19 years old. No issues like he had, patience and trial would show you/ him the same.
@@withlinbarhm1627 Chemical guys have a good product if you go watch the damn video on how to apply it you will see that it is best used after a car wash ans after you apply a second product! Stop complaining because you're a fucking amateur!
@@KirkDem why do I have to buy and use other products in order for this product to work? Too many products out there that work just fine by themselves. Sounds like your the idiot for falling for chem guys hype. Crap product! Wouldn't shine a shoe with this shit!
This product works as intended. Who ever told you to wet the application pad couldn't be more incorrect. I was very surprised you ran with that as a valid comment. Love most of your content but your assessment of Hydro Slick is going to confuse others more than it confused you.
I’ve done some paint correction recently and after, I went straight to coating the body with hyrdroslick. It was super hard to buff out and didn’t last long at all. I then realized I didn’t prep the surface after the paint correction (stripping the oils/waxes & residues left behind by compounds and polishes) I did a paint correction again, prepped the surfaces removing the residues to allow hydroslick to bond to the clear coat properly & it buffed out super easy this time around. I also am allowing it to cure properly and am currently awaiting to see the longevity of it this time.. hopefully it bonds properly and lasts much longer like it says
Just used it on an exotic car; it shined like a wet mirror. Great product. Used 4-5 dots instead of 1. Turned out fantastic! if its safe to be used on a 500k car ; its safe to use on any vehicle. Cheers!
Had zero issues with Hydroslick. Applying and buffing. Perhaps a bad bottle he got or maybe was left out in the sun 🤷♂️ I love this stuff with great results
I got a bad bottle of HydroSlick. The consistency was like a hard pudding; does not mix well no matter how much you shake the bottle. It does not even come out of the hole from the lid even if you squeeze the bottle. HydroSlick bottle gone bad! It was very very difficult to remove after it was applied even if I used less.
First.. "damping"? What? Next, the hood you tried it on looked like raw unfinished porous stone. That could be why it is so difficult to remove. And last.. the trunk is the definition of orange peel effect. Try on a smooth paint corrected surface. Follow the instructions. The product is easy to remove.
Again, idiot, why should I have to do 5 hrs of prep for this shit to work as advertised? Ohh, it works best when combined with other overpriced chem guy crap. I get it.
@@timlassabe890 - You made this video, and I am the idiot? LOL. - You said "damping", and I'm the idiot? LOL - You tried to put a coating on a surface that looks like a pumice stone, and I'm the idiot? LOL. - You should make a video on trying to put vinyl wrap on beach sand and complain how it does not work like advertised. LOL. And I am the idiot? Comedy!
If you actually used the product, you would understand why. The difficulty to wipe off doesn't change after 30 seconds. In fact, it will make your paint have a blue tinge if you leave it on too long and are unable to remove it.
bottle states to leave it on for atleast 1-2 minuites. ive used this product on more than 10 vehicles and have yet to have a super tough time removing this product. like you are having.
I was excited to use this but when I did I had the exact same experience. It is the worst to remove and a major letdown. I followed the instructions and still couldn’t get the stuff off the car. Major bummer.
Dude, I'm with you. I washed and completely coated my car, then did my trunk with hydroslick exactly per the directions and was unimpressed. I don't mind it being hard to get off, but it didn't leave the smooth glass finish I am used to from a good wax. I just hope I can wax over it now with no ill effects.
I JUST used it for the first time about an hour ago. It was nearly impossible to remove. It came out sort of "grainy", and those grains just wouldnt wipe off. I actually stopped after using it on the hood, roof, and front fenders. I googled issues, and this video came up. Im never using it again. After detailing a car for 1.5 hours, I dont want to endure crossfit levels of exertion to protect my truck
People who haven’t used great other products don’t seem to understand how difficult this product actually is. It is not that this won’t work but it’s not AS great as others. Great job Luke keep it up.
With all these new Ceramic products coming out from Meguiar's and Turtle Wax that are more user friendly and cost effective I think Chemical Guys is getting lost in the shuffle.
I mean I haven't tested it but if you're going to test something, stick with the actual instructions. I'm sure they are there for a reason. You need to let it sit for an actual test. What kinda test is out it on and wipe it right off? It needs to cure to even test that one small aspect. If you're going to test something rest it as per instructions.
DeMad Hatta the directions say CAN be wiped after 30 seconds, bu recommend two minutes. This guy jus has an issue with CG. How can you purposely not follow directions, then say the product is no good?
I had the same issue when removing/buffing. Tryed to leave it on for shorter/longer time. Thin thick I still didn’t matter. I’m not using the product anymore
I don’t understand the issue. I applied this to my SUV with no issues at all. In fact, it’s working great for me. 4-5 dots at a time, dab it out on the paint, the. Cross hatch to rub it in. I waited 20s and repeated the crosshatch pattern with light pressure, my thinking was that this would allow it to partially flash and then if better fill in any low spots. Buffed off within 1-1:30. This was in warm humid weather, on a freshly washed but dry car. No paint correction, no decontamination, but it did have an ~2month old application of Hybrid Solutions Ceramic Spray.
Stop.. just stop...like ok. First you use to much...then you try to be funny by using to little. It states 1 to 2 min before removal. You do it 30 seconds later. Its not even dry yet. Then you complain that it takes so much effort to remove. Theres more meat on a hockey stick then those arms of yours so you struggle. Nobody should take you very serious.🤙
Did a full paint correction. 1k grit 2k grit and 3k grit then compound and polish. It took me longer to wipe this off of the hood than any of the steps of the paint correction. I feel like I applied it and then just removed it all with how hard I had to hand buff it
I use this stuff every time. It works amazingly. I use it on my glass my paint the whole car I don’t even have to use my windshield wipers when it rains.
I love this stuff. Incredibly easy to use. I leave it sit while I do 2 or 3 panels before I buff it off. Comes off really easy and after being rained on and parked under a tree my car still looks great.
I'd say for the $40 + you spent on it you should be able to to return it for a refund or replacement if your product doesn't stand up to what they claim...
I mean he is not following the actual directions.. its suppose to be about four dots on the pad and let it sit for 2 to 2 mins...oohh and youre not suppose to spread it on the pad...and...always use clean pads and towels..
I think it works great, it does leave the paint ultra slick to the touch. (seriously, best I have ever seen without true ceramic coating) It also really keeps the dust off my truck. I get great results with it. Its not a ceramic coating, DUH. The shine and gloss is much better than Maguire's. I think Maguire's leaves my paint dull and hazy. (and yes, I am applying it as directed) Apex detail did a good video on how long hydro slick lasts. And in his video you can clearly see the improvement in the gloss & shine. It does take a bit of elbow grease to remove, but no more than the old school paste wax. (no pain no gain) I have no issues seeing where to take it off. I think your videos have become very subjective, and that's is why I unsubed a while ago. You did the same thing with Maguire's when it first came out. You hated it, and thought it was junk, until they held your hand to actually apply it correctly. I get it, you are a detailer and want to do things as fast as possible, but that's does not usually produce the best results. But alas, you don't seem to read the comments anymore, so I have basically wasted my time, because you clearly don't care about your subscribers anyone.
Don't listen to people like this. They don't understand the products they are using. This product will actually ATTRACT dust and dirt, like silicone should. It doesn't last, it's hard to fully remove, and it is terrible for your microfiber towels. It's not ultra slick to the touch, it's the same as a common wax (which is easy to remove you inexperienced dumb ass). It repels water like a common wax. It even shines like a common wax. If you don't have a single negative thing to say about a product, you are hiding the truth because no products are perfect.
What the fuck is "common wax"? Sounds like you are the dumbass. I never said it was perfect, I said it works. My main complaint was that the UA-camr wasn't responding to comments from his viewers anymore.
I've used that coating before it's generally for DYI'er. But to be honest it's not a bad coating. It was easy to apply, easy to remove and the results are good however, when you compare there price to professional coatings you can get professional coatings for the same price if not cheaper depending where you look. But I would definitely recommend it if you're just starting out detailing for it's of use.
@@hectorvarela_ DetailImage.com is public website that sells professional products to the public. You can get Gyeon, Gtechnic, 3D, PS, CarPro to name a few. If you think about it they'll have it on there website. You can use the codes they send out. They also have a wholesale program if you happen to buy products in quantities. There's also Detailing.com but they might be pricey and they have one sale a year on Black Fridays. Hope this helps if you have any questions please feel free to ask. By the way, if was Wilson, I would be using CG Hydrocharge instead of hydroslick. Same thing in a liquid form, easy on, off.
Once again, I'm surprised of your results. I did not go super thin on my applicator pad, I actually put more product on but made sure I leveled it and spread it evenly. I did not have any trouble removing it at all. Try removing Mckees 37 ceramic coating, that is about 10 times more difficult, or Gold Label ceramic wheel coating, even tougher.
Agreed, I actually used a good amount like chemical guys demonstrate in their videos. I mean your going to have some resistance when removing this type of coating if you want any kind of protection I would imagine.
If you don't hand wash the car & then clay bar after to remove all the embedded contaminants - then you will have problems trying to remove it ! Clean the frickin vehicle 1st !
I have .. and Ill say this.. its prob the best spray sealant I have.. (Seal and shine. Beadmaker, wipe and shine etcetc) but its expensive.. its easier to apply and remove compared to S&S and seems to have a much better self cleaning effect as the paint was staying dust free twice as long. Is it worth 40$ for 16oz? I dunno
I honestly don’t know why you’re having issues. I just used it on my 2018 Durango R/T. I bought my Durango back in Jan. 2022 I am the second owner. I don’t believe it’s ever been given a wax treatment before. It’s absolutely gorgeous now and I didn’t experience any issues with removal of this product and I was putting it on fairly think too. Just a bit of elbow grease. No big deal.
Bro you might wanna change your channel name to "Wilson Sorta Auto Detailing". Either you got a boot leg bottle or you editing the hell out of your video and following your own directions. I'm not a professional detailer but keeping my vehicles in showroom condition is a passion for many years. I can't attest to the durability of this product yet, but I followed the directions exactly how it's stated on the bottle. This stuff applied very easily, waited the stated time and it buffed out like butter. Truck is a magnetic gray so it was easy to see if product was still left on the paint.
I realize responding to comments takes up a lot of time, but if you go to the trouble of making videos, people will ask questions and leave comments. You do need to reply to some.. if you want subscribers to continue to follow you. Just my opinion.
Lol. I don't know what AutoFanatic did then. He made this look easy, but there is something not working right with this product I guess if most people are struggling with it. Oh well...
Just used this on a brand new car. Did the trunk as a test panel and only used two small squirts on a dry microfiber pad. Applied in the cross hatch pattern and gave it a full minute and it left behind a rough, almost gritty, texture. Using several microfiber towels and a lot of elbow grease, I finally got the shit off. It's definitely slicker than the rest of the car but I'm afraid to continue applying.
Follow up: So I found that using less of the product on a smaller area gives better results. I put small dabs of Hydroslick on the microfiber application, then I go ahead and spread that on the pad with a finger. I noticed this reduces it laying heavy in spots even after dabbing the surface in multiple areas. Otherwise it creates these gelatin like boogers and end up being the rough gritty texture I experienced before. Now I'll give it some time to cure and see how it holds up to the elements.
I put on 2 coats of ceramic coating first, then used hydroslick and used quite a bit and waited almost 2 minutes before removing and it came off no problem.
When I first used this product, it was pretty easy to remove. The last three vehicles I’ve applied this on have been a different story. I think it may have to do with humidity. Every time I’ve used this product, I’ve applied it and buffed it with microfiber cloths. I’ve followed the directions as well. I understand your angst.
I used it on two different vehicles. One was horrible to remove, the other was easy. I definitely would not recommend it either way. The durability is poor.
Basically it's a synthetic/natural wax base with a sio2 concentration that sort of fills in the occurring pores of the wax on a microscopic level.. Angelwax Enigma is an example of a good ceramic wax. That stuff is very easy to apply and remove and is very durable. Ceramic wax is basically a product to sell consumers who are scared of anything called a "coating" and/or just enjoy the process of waxing their vehicles frequently. Not something I use very often professionally or otherwise.
That stuff sucks! I tried it on my m4 And all it did was make a mess! I used McGuiars quick detailer to remove it, thank goodness for McGuiars! Saved me big time!
Apply by hand and power buff off with orbital maybe more easy but your the professional .and I agree so many other products that work great thanks again.hey luke can you do a video on pin strip removal.
You don't have to use a damp applicator, i applied this product and it whiped off easy, with a thin and thicker coat. A damp applicator and short cure time results in streaks and it will be hard to buff off to a clear finish. If there is contamination on the paint it will also be harder to buff off.
Totally agree with you. I have tested hydroslick on my car. It took me almost the whole day to buffer this stuff off. I even use isopropanol at last, and there is still haze on my car. I’ll stick with the meguiars product in the future.
Try it with a spray ceramic coating…. small amount, just enough to keep the applicator pad moving and also keep lubrication for the microfiber towel during removal. I realize this was a test and not on a live vehicle paint but use of NON Microfiber towels for any automotive paint work, clay, polish, SS remover, compounds is strongly discouraged. I have left many of commercial car washes due to not having clean Microfiber towels to dry.
Bro, you keep saying "it's a bear" to take it off. I've used it numerous times and never had an issue. I grew up with old school Simoniz as a car wax. If you've ever tried getting that stuff off after leaving it on too long, you'd appreciate just how simple this stuff really is. 🙄
What you should had discovered and maybe will when you watch it back is 1 panel was very clean, IE fresh clear and the other still had product on the surface... so clean first to the paint.
Why do so few detailers talk about polishing windows and fixing minor scratches on windshields? Because windows are as much a part of a car as anything else.
@@TheCrashley1772 And i have some hairline scratches that can only be seen when the lighting is right but they bother me and i want to remove them and have all of my windows looking as transparent as possible.
Spider Man check out apex detail’s you tube channel for better detailing videos including a few windshield polishing and coating videos. He restores them and explains the unique issues for glass
Thank you for your review of Hydro Slick. It seems like Chemical Guys need to go back to the drawing board on Hydro Slick. Personally I've gravitated towards Adam's products as a trusted source for car care products. However, the thing that piqued my interest was your use of Optimum Clear Coat Restorer. I searched through your past videos to see if you have reviewed this product but found nothing. If you did review the product please point me to it. If not, your thoughts on the product would be much appreciated.
It seems like WIlson needs to go back to the drawing board. Second video and still not doing the most basic thing..follow the instructions. How this guy has 140k subs is a mystery lol
Just a suggestion but if your product has hydrophobic properties then why would water make a difference? Next time just try a bit of quick detailer with the removal. Haven't tried this product so I cannot comment on it but if you haven't tried hydrocharge and you were looking for an actual ceramic coating , try it . Hydroslick is their attempt of making a wax that acts like a ceramic so its a weird product to begin with
Yes defenitly need to decontaminate and polish if not when you try it on the most fkd up hood ive ever seen of course you cant wipe it off its grabbing on to all those defects you can think of.. that hood been through afghanistan war and back im pretty sure lolll
Tried this on a freshly paint hood and fender. Poor performance, lack of beading and gloss was sub par. Comment section talks about how the youtber put too much, then put too little. Now he has to dampen the applicator pad etc etc. It shouldn't be this complicated of an application process when the product it's trying to simulate (ceramic coating) seems much simpler. I went back to using bead maker and collinite, where the application process was way more forgiving and performed way better.
Hard to take off? Good lord what the hell is wrong with people. I slathered that shit all over my car using probably about 3x the amount mentioned in the videos and then let it sit for 30 mins. It took more effort to peel the plastic off under the cap than it did to wipe and buff it clean.
You straight up not listening to comments or instructions! Lol! What! How does someone say " I'm gonna try again and listen to comments and instructions" and completely fail, again! in a second VIDEO! What the hell did I just watch, lol!
I've used this stuff on my 2017 Alfa Romeo Giulia and my dad's 67 E type. No issues on either car. I know it works as I did a test on the trunk of my Alfa before tackling the entire car. When I washed the car off after the test area the soap was sliding off the trunk surface. I will be applying this to all the cars I own and look after. To each their own. I love it, you hate it. Fair enough.
Ya he totally applied it wrong both times when he could have literally followed the actually instructions. Feel like an excuse to purposely set it up for failure but made the time to review again so can't blame him 🤷♂️
I used it on my Frontier. I followed the directions and had no issues with it. I was completely satisfied with the results.
I’ve used it three times and watched the proper way to apply it in between and still it won’t come off right. I also use it on black cars so anything that’s not coming off is much more noticeable then a grey, silver or white car
@@jt9264 I gave 303 Graphene Nano and have been using that for the last two years. It is the best stuff that I've come across for the money. It typically lasts for 3-4 months.
I actually applied this to my car today and had no issue removing it. It was a bit more effort than wax, but no big deal.
Directions-"we recommend allowing 1-2 minutes before removing"
Detail dude- 30 sec later "alright now I'm going to begin buffing"
This has to be a joke, the way you applied the product reminded me of the first time I put wax on my first car. Slow no movement, you have to spread the product and work it in. Not glide across the surface in streaks. I used this product last month and people though I painted my car. It's an 2001 with black paint. 10/10 product and you use almost none of the bottle for a full car, the bottle should last for years....
The reason they say to leave it on for 1-2 minutes is to make sure it lays smooth. The ease of removal doesn't change dumb ass. If you have actually used the product, you would know this. You don't have to spread or work this product in, that literally does nothing for it LMFAO
@@VividTape Wrong, the wait times is necessary so the product can dry! Allowing the residue left behind to be buffed or wiped off easily.
Not waiting leaves you with the un-evaporated solution that allows you to spread the product.
Resulting in a "tough buff" situation.
I have used the product, in fact I used it before this video popped up on my feed...my paint is 19 years old. No issues like he had, patience and trial would show you/ him the same.
You should try following the actual directions. It says right on the bottle they recommend 2 minutes. I find it quite easy to remove.
Same , used a bottle so far since it was released , goes on and off easy
Chemical guys have trash products. Sounds like you work for them or you want free crappy products.
@@withlinbarhm1627 Chemical guys have a good product if you go watch the damn video on how to apply it you will see that it is best used after a car wash ans after you apply a second product! Stop complaining because you're a fucking amateur!
@@withlinbarhm1627 if you have to watch a video on how to apply a simple wipe on/wipe off coating, that should tell you something.
@@KirkDem why do I have to buy and use other products in order for this product to work? Too many products out there that work just fine by themselves.
Sounds like your the idiot for falling for chem guys hype. Crap product! Wouldn't shine a shoe with this shit!
This product works as intended. Who ever told you to wet the application pad couldn't be more incorrect. I was very surprised you ran with that as a valid comment. Love most of your content but your assessment of Hydro Slick is going to confuse others more than it confused you.
Your supposed to wet the pad, auto finesse autoglym will tell you to wet it, it's to have a soft fiber to help spread the product
I’ve done some paint correction recently and after, I went straight to coating the body with hyrdroslick. It was super hard to buff out and didn’t last long at all. I then realized I didn’t prep the surface after the paint correction (stripping the oils/waxes & residues left behind by compounds and polishes) I did a paint correction again, prepped the surfaces removing the residues to allow hydroslick to bond to the clear coat properly & it buffed out super easy this time around. I also am allowing it to cure properly and am currently awaiting to see the longevity of it this time.. hopefully it bonds properly and lasts much longer like it says
Hello, how long did the HydroSlick last you?
Just used it on an exotic car; it shined like a wet mirror. Great product. Used 4-5 dots instead of 1. Turned out fantastic! if its safe to be used on a 500k car ; its safe to use on any vehicle. Cheers!
Sure you did...Honda is not an exotic.
I just used it on my Saleen S7 and my new Cybertruck. Works great 👍🏻
I followed the directions. Waited more than 30 sec. Hard to remove. With you man
Had zero issues with Hydroslick. Applying and buffing. Perhaps a bad bottle he got or maybe was left out in the sun 🤷♂️ I love this stuff with great results
I got a bad bottle of HydroSlick. The consistency was like a hard pudding; does not mix well no matter how much you shake the bottle. It does not even come out of the hole from the lid even if you squeeze the bottle. HydroSlick bottle gone bad! It was very very difficult to remove after it was applied even if I used less.
First.. "damping"? What?
Next, the hood you tried it on looked like raw unfinished porous stone. That could be why it is so difficult to remove.
And last.. the trunk is the definition of orange peel effect. Try on a smooth paint corrected surface. Follow the instructions. The product is easy to remove.
Again, idiot, why should I have to do 5 hrs of prep for this shit to work as advertised? Ohh, it works best when combined with other overpriced chem guy crap. I get it.
@@timlassabe890 - You made this video, and I am the idiot? LOL.
- You said "damping", and I'm the idiot? LOL
- You tried to put a coating on a surface that looks like a pumice stone, and I'm the idiot? LOL.
- You should make a video on trying to put vinyl wrap on beach sand and complain how it does not work like advertised. LOL. And I am the idiot? Comedy!
@@jsdandridge The guy you're talking to (Jeff) is not the guy (Luke Wilson) who made the video.
I’ve used it plenty of times with customer cars and I think it works great and I always put 3 dots on the pad
Why not leave it on longer than 30 seconds? 🤦🏻♂️
Because he needs to make Is Hydro Slick Any Good?: Part 3.
If you actually used the product, you would understand why. The difficulty to wipe off doesn't change after 30 seconds. In fact, it will make your paint have a blue tinge if you leave it on too long and are unable to remove it.
Use an orbital buffer?
Stuff us great, did you follow the directions?
Did u clay bar it first ?
I feel you on this. I used this on my vehicle and I have to apply force to the car in order to get off
Literally just went through this couple minutes ago. Kinda sucked. Shit would not come off
bottle states to leave it on for atleast 1-2 minuites. ive used this product on more than 10 vehicles and have yet to have a super tough time removing this product. like you are having.
I was excited to use this but when I did I had the exact same experience. It is the worst to remove and a major letdown. I followed the instructions and still couldn’t get the stuff off the car. Major bummer.
Dude, I'm with you. I washed and completely coated my car, then did my trunk with hydroslick exactly per the directions and was unimpressed. I don't mind it being hard to get off, but it didn't leave the smooth glass finish I am used to from a good wax. I just hope I can wax over it now with no ill effects.
I JUST used it for the first time about an hour ago. It was nearly impossible to remove. It came out sort of "grainy", and those grains just wouldnt wipe off. I actually stopped after using it on the hood, roof, and front fenders.
I googled issues, and this video came up. Im never using it again. After detailing a car for 1.5 hours, I dont want to endure crossfit levels of exertion to protect my truck
People who haven’t used great other products don’t seem to understand how difficult this product actually is. It is not that this won’t work but it’s not AS great as others. Great job Luke keep it up.
Ok what are these other great products
I had the same issue, you’re not crazy. I’m thinking it was a bad batch that we had..
With all these new Ceramic products coming out from Meguiar's and Turtle Wax that are more user friendly and cost effective I think Chemical Guys is getting lost in the shuffle.
Ed Ruiz true. I used the turtle wax ICE seal and shine for 10$ and it’s been a few months and my car still beads water.
@@charlesdominiclopez416 trueeeee. same here.
Turtle wax stuff at walmart cost $7.
It’s true, seal n shine does do a good job
Ed Ruiz don’t worry, Chemical Guys will just come out with 500 more products that all do the same thing and perform less than mediocre. Hahahahaha
I mean I haven't tested it but if you're going to test something, stick with the actual instructions. I'm sure they are there for a reason. You need to let it sit for an actual test. What kinda test is out it on and wipe it right off? It needs to cure to even test that one small aspect. If you're going to test something rest it as per instructions.
considering the directions say to let sit 30 seconds and whipe..... have you used this yet???
DeMad Hatta the directions say CAN be wiped after 30 seconds, bu recommend two minutes. This guy jus has an issue with CG. How can you purposely not follow directions, then say the product is no good?
@@davidgossage2244 lmfao ik right
I had the same issue when removing/buffing.
Tryed to leave it on for shorter/longer time. Thin thick I still didn’t matter.
I’m not using the product anymore
I don’t understand the issue. I applied this to my SUV with no issues at all. In fact, it’s working great for me. 4-5 dots at a time, dab it out on the paint, the. Cross hatch to rub it in. I waited 20s and repeated the crosshatch pattern with light pressure, my thinking was that this would allow it to partially flash and then if better fill in any low spots. Buffed off within 1-1:30.
This was in warm humid weather, on a freshly washed but dry car. No paint correction, no decontamination, but it did have an ~2month old application of Hybrid Solutions Ceramic Spray.
Stop.. just stop...like ok. First you use to much...then you try to be funny by using to little. It states 1 to 2 min before removal. You do it 30 seconds later. Its not even dry yet. Then you complain that it takes so much effort to remove. Theres more meat on a hockey stick then those arms of yours so you struggle. Nobody should take you very serious.🤙
they also recommended to completely prep the surface, and yes the use of the product is easy to remove for me...
Did a full paint correction. 1k grit 2k grit and 3k grit then compound and polish. It took me longer to wipe this off of the hood than any of the steps of the paint correction. I feel like I applied it and then just removed it all with how hard I had to hand buff it
How a bout one big as drop instead of one dot because it only lasted for one week
I use this stuff every time. It works amazingly. I use it on my glass my paint the whole car I don’t even have to use my windshield wipers when it rains.
I love this stuff. Incredibly easy to use. I leave it sit while I do 2 or 3 panels before I buff it off. Comes off really easy and after being rained on and parked under a tree my car still looks great.
Does it repel bugs?
I'd say for the $40 + you spent on it you should be able to to return it for a refund or replacement if your product doesn't stand up to what they claim...
That terry cloth applicator pad is it safe? Would you say it’s better than the usual microfiber pads?
Thought I was going crazy after trying to buff out this for 15 minutes straight had to confirm I’m not the only one. Lmao😂
I mean he is not following the actual directions.. its suppose to be about four dots on the pad and let it sit for 2 to 2 mins...oohh and youre not suppose to spread it on the pad...and...always use clean pads and towels..
I'm a bit lost. Why would you want to remove the HydroSlick? Isn't the idea of a ceramic coat supposed to protect the vehicle?
I think it works great, it does leave the paint ultra slick to the touch. (seriously, best I have ever seen without true ceramic coating) It also really keeps the dust off my truck. I get great results with it. Its not a ceramic coating, DUH. The shine and gloss is much better than Maguire's. I think Maguire's leaves my paint dull and hazy. (and yes, I am applying it as directed) Apex detail did a good video on how long hydro slick lasts. And in his video you can clearly see the improvement in the gloss & shine. It does take a bit of elbow grease to remove, but no more than the old school paste wax. (no pain no gain) I have no issues seeing where to take it off. I think your videos have become very subjective, and that's is why I unsubed a while ago. You did the same thing with Maguire's when it first came out. You hated it, and thought it was junk, until they held your hand to actually apply it correctly. I get it, you are a detailer and want to do things as fast as possible, but that's does not usually produce the best results. But alas, you don't seem to read the comments anymore, so I have basically wasted my time, because you clearly don't care about your subscribers anyone.
Don't listen to people like this. They don't understand the products they are using. This product will actually ATTRACT dust and dirt, like silicone should. It doesn't last, it's hard to fully remove, and it is terrible for your microfiber towels. It's not ultra slick to the touch, it's the same as a common wax (which is easy to remove you inexperienced dumb ass). It repels water like a common wax. It even shines like a common wax. If you don't have a single negative thing to say about a product, you are hiding the truth because no products are perfect.
What the fuck is "common wax"? Sounds like you are the dumbass.
I never said it was perfect, I said it works. My main complaint was that the UA-camr wasn't responding to comments from his viewers anymore.
hello, what product could I use as maintenance for hydroslick? staying always in the house chemical guys
Hydrosuds for maintenance wash or for a quick detail spray ho for the hydrospeed
You should review the armour shield IX ceramic coating by avalon king
I'll like to see what more people think about it.
I've used that coating before it's generally for DYI'er. But to be honest it's not a bad coating. It was easy to apply, easy to remove and the results are good however, when you compare there price to professional coatings you can get professional coatings for the same price if not cheaper depending where you look. But I would definitely recommend it if you're just starting out detailing for it's of use.
@@majesticdetail3422 where would you find professional coatings for cheaper?
@@hectorvarela_ DetailImage.com is public website that sells professional products to the public. You can get Gyeon, Gtechnic, 3D, PS, CarPro to name a few. If you think about it they'll have it on there website. You can use the codes they send out. They also have a wholesale program if you happen to buy products in quantities. There's also Detailing.com but they might be pricey and they have one sale a year on Black Fridays. Hope this helps if you have any questions please feel free to ask. By the way, if was Wilson, I would be using CG Hydrocharge instead of hydroslick. Same thing in a liquid form, easy on, off.
Is it suppose to be that thick? Honestly I like the things I already use do I have no need to even try it.
Once again, I'm surprised of your results. I did not go super thin on my applicator pad, I actually put more product on but made sure I leveled it and spread it evenly. I did not have any trouble removing it at all. Try removing Mckees 37 ceramic coating, that is about 10 times more difficult, or Gold Label ceramic wheel coating, even tougher.
Agreed, I actually used a good amount like chemical guys demonstrate in their videos. I mean your going to have some resistance when removing this type of coating if you want any kind of protection I would imagine.
I too use a bit more product than what the manufacturer recommends.
If you don't hand wash the car & then clay bar after to remove all the embedded contaminants - then you will have problems trying to remove it ! Clean the frickin vehicle 1st !
Have you test the last coat is it any good?
I have .. and Ill say this.. its prob the best spray sealant I have.. (Seal and shine. Beadmaker, wipe and shine etcetc) but its expensive.. its easier to apply and remove compared to S&S and seems to have a much better self cleaning effect as the paint was staying dust free twice as long. Is it worth 40$ for 16oz? I dunno
Lots of people in the detailing community complaining about this product, some were in Arizona with you.
Brian @Apex approves of it, I have seen some good reviews on this and some bad ones...just like all of the other products..
Wonder if humidity is the issue. Lol oh well I'm in the northeast and it wipes off just like any wax or sealant I have used.
I honestly don’t know why you’re having issues. I just used it on my 2018 Durango R/T. I bought my Durango back in Jan. 2022 I am the second owner. I don’t believe it’s ever been given a wax treatment before. It’s absolutely gorgeous now and I didn’t experience any issues with removal of this product and I was putting it on fairly think too. Just a bit of elbow grease. No big deal.
I didn't think it was hard to remove. I usually paste wax though.
What if you use a damp microfiber to wipe off the first layer and then a dry microfiber to follow
Nathan Chappell please don’t do this, the product is not supposed to be exposed to water during the curing period
It was just a reccondation to try bc apparently the product isnt that great anyway. I wouldnt use it
Bro you might wanna change your channel name to "Wilson Sorta Auto Detailing". Either you got a boot leg bottle or you editing the hell out of your video and following your own directions. I'm not a professional detailer but keeping my vehicles in showroom condition is a passion for many years. I can't attest to the durability of this product yet, but I followed the directions exactly how it's stated on the bottle. This stuff applied very easily, waited the stated time and it buffed out like butter. Truck is a magnetic gray so it was easy to see if product was still left on the paint.
I realize responding to comments takes up a lot of time, but if you go to the trouble of making videos, people will ask questions and leave comments. You do need to reply to some.. if you want subscribers to continue to follow you. Just my opinion.
Pan the organizer will answer you...
Watch auto fanatics video he applied it on his car and he is very hard to please
Lol. I don't know what AutoFanatic did then. He made this look easy, but there is something not working right with this product I guess if most people are struggling with it. Oh well...
That guy made it look easy...this guys a joke.
Just used this on a brand new car. Did the trunk as a test panel and only used two small squirts on a dry microfiber pad. Applied in the cross hatch pattern and gave it a full minute and it left behind a rough, almost gritty, texture. Using several microfiber towels and a lot of elbow grease, I finally got the shit off. It's definitely slicker than the rest of the car but I'm afraid to continue applying.
Follow up: So I found that using less of the product on a smaller area gives better results. I put small dabs of Hydroslick on the microfiber application, then I go ahead and spread that on the pad with a finger. I noticed this reduces it laying heavy in spots even after dabbing the surface in multiple areas. Otherwise it creates these gelatin like boogers and end up being the rough gritty texture I experienced before. Now I'll give it some time to cure and see how it holds up to the elements.
I put on 2 coats of ceramic coating first, then used hydroslick and used quite a bit and waited almost 2 minutes before removing and it came off no problem.
i have no issues with this product, not my go to but its ok for a nice shine for a little while
When I first used this product, it was pretty easy to remove. The last three vehicles I’ve applied this on have been a different story. I think it may have to do with humidity. Every time I’ve used this product, I’ve applied it and buffed it with microfiber cloths. I’ve followed the directions as well. I understand your angst.
Bingo you hit it on the head! I was waiting for someone to mention that!
I used it on two different vehicles. One was horrible to remove, the other was easy. I definitely would not recommend it either way. The durability is poor.
What’s a (ceramic wax) anyways? I feel it’s all hype!
Basically it's a synthetic/natural wax base with a sio2 concentration that sort of fills in the occurring pores of the wax on a microscopic level..
Angelwax Enigma is an example of a good ceramic wax. That stuff is very easy to apply and remove and is very durable.
Ceramic wax is basically a product to sell consumers who are scared of anything called a "coating" and/or just enjoy the process of waxing their vehicles frequently. Not something I use very often professionally or otherwise.
@@jdisdetermined this
it really is hype man.... i've used several of them and i like the synthetic waxes best.
Great video but sad to see your not responding to comments anymore.
Your supposed to use hydro charge first on paint work the hydro slick over the top
Thanks for your video! Wilson, do you still recommend jetseal or no?
That stuff sucks! I tried it on my m4
And all it did was make a mess! I used McGuiars quick detailer to remove it, thank goodness for McGuiars! Saved me big time!
using 1 drop an test or use 2 and test again are 3 to see how's the removal Of the product
Apply by hand and power buff off with orbital maybe more easy but your the professional .and I agree so many other products that work great thanks again.hey luke can you do a video on pin strip removal.
I agree with you ,I had the same results.
When it comes to waxes and sealants I personally stick to the top, established corporate brands because they have the big R&D budgets.
Their respective marketing departments usually have bigger budgets ...
I agreed with him... but it was a freaking bear to get off...but it does work good if you get past that! and not everything is for everyone
You don't have to use a damp applicator, i applied this product and it whiped off easy, with a thin and thicker coat. A damp applicator and short cure time results in streaks and it will be hard to buff off to a clear finish. If there is contamination on the paint it will also be harder to buff off.
Totally agree with you. I have tested hydroslick on my car. It took me almost the whole day to buffer this stuff off. I even use isopropanol at last, and there is still haze on my car. I’ll stick with the meguiars product in the future.
You have to clay bar and iron decontaminate your car first, guarantee that was her issue of the hazing!
@@ryanmanning5835 if i had time to decontaminate the whole car I rather ceramic coat my car instead of using this product.
Can you follow directions???
Dang, I thought we were going to figure that one out.
Try it with a spray ceramic coating…. small amount, just enough to keep the applicator pad moving and also keep lubrication for the microfiber towel during removal.
I realize this was a test and not on a live vehicle paint but use of NON Microfiber towels for any automotive paint work, clay, polish, SS remover, compounds is strongly discouraged. I have left many of commercial car washes due to not having clean Microfiber towels to dry.
Bro, you keep saying "it's a bear" to take it off. I've used it numerous times and never had an issue. I grew up with old school Simoniz as a car wax. If you've ever tried getting that stuff off after leaving it on too long, you'd appreciate just how simple this stuff really is. 🙄
What you should had discovered and maybe will when you watch it back is 1 panel was very clean, IE fresh clear and the other still had product on the surface...
so clean first to the paint.
I don’t know why you are having such a hard time getting it off. It came off so easy when I did it. But I did it how they say to.
How is this that hard this is a great product
All this and you dont even show the results after? Or actually follow the instructions or use decent stuff to apply and remove. Waste of time!!
Why do so few detailers talk about polishing windows and fixing minor scratches on windshields? Because windows are as much a part of a car as anything else.
Exactly! I have an issue with getting the windshield clean and when the sun is lower in the horizon, the windshield looks like has been sandblasted.
@@TheCrashley1772 And i have some hairline scratches that can only be seen when the lighting is right but they bother me and i want to remove them and have all of my windows looking as transparent as possible.
@@BruceWayne-jg3hv just polish it and put a sealeant or a coating on them
Spider Man check out apex detail’s you tube channel for better detailing videos including a few windshield polishing and coating videos. He restores them and explains the unique issues for glass
Thank you for your review of Hydro Slick. It seems like Chemical Guys need to go back to the drawing board on Hydro Slick. Personally I've gravitated towards Adam's products as a trusted source for car care products. However, the thing that piqued my interest was your use of Optimum Clear Coat Restorer. I searched through your past videos to see if you have reviewed this product but found nothing. If you did review the product please point me to it. If not, your thoughts on the product would be much appreciated.
Level cruiser, he did a video on this about a week ago.
It seems like WIlson needs to go back to the drawing board. Second video and still not doing the most basic thing..follow the instructions. How this guy has 140k subs is a mystery lol
Test the water beeding
Thanks for the vid alot of ppl hype this stuff up!!! Now I know I will go for something else!!
He sounds like AlphaM on UA-cam
I agree on the removal
Just a suggestion but if your product has hydrophobic properties then why would water make a difference? Next time just try a bit of quick detailer with the removal. Haven't tried this product so I cannot comment on it but if you haven't tried hydrocharge and you were looking for an actual ceramic coating , try it . Hydroslick is their attempt of making a wax that acts like a ceramic so its a weird product to begin with
Just did my entire ram 2500 quad cab long bed and it was the farthest from "hard" to wipe off. I've used waxes that were more difficult.
i seen other ppl decontaminate the surface 1st
Yes defenitly need to decontaminate and polish if not when you try it on the most fkd up hood ive ever seen of course you cant wipe it off its grabbing on to all those defects you can think of.. that hood been through afghanistan war and back im pretty sure lolll
Same here it doesn’t come off, and it doesn’t perform well either. Not worth the money.
Tried this on a freshly paint hood and fender. Poor performance, lack of beading and gloss was sub par. Comment section talks about how the youtber put too much, then put too little. Now he has to dampen the applicator pad etc etc. It shouldn't be this complicated of an application process when the product it's trying to simulate (ceramic coating) seems much simpler. I went back to using bead maker and collinite, where the application process was way more forgiving and performed way better.
Hard to take off? Good lord what the hell is wrong with people. I slathered that shit all over my car using probably about 3x the amount mentioned in the videos and then let it sit for 30 mins. It took more effort to peel the plastic off under the cap than it did to wipe and buff it clean.
Let me explain simply.. it’s like a conditioner for your hair not a shampoo
You straight up not listening to comments or instructions! Lol! What! How does someone say " I'm gonna try again and listen to comments and instructions" and completely fail, again! in a second VIDEO! What the hell did I just watch, lol!
Chemical guys is 80% hype and 20% decent stuff. Always has been.
No, you didn’t. It’s just simply shit. Lol
He talks like McFly
The simple fact that you asked the question “Does this product kinda suck?” 😑... You’ve been more than fair with your test.
Let’s be honest he doesn’t like the product . Still. I use it and it works very well
This product is not hard whatsoever to take off, i have a 2019 black challenger and i use this product and love it. Follow directions
I use it because of it's cool blue color that matches my car. Why lie?
Regardless this product is not better than ceramic coating or spray coating.