@@toNynho88 I maxed out the stock bolts on the rear. And 1/2 on the front. You can get lowering bolts fairly cheap if you want to go lower. Good thing about it. Is that it’s not hard to adjust ride height. So you can easily adjust til you get your desired stance.
I didn't realize it was that easy. thanks for sharing!
Super easy and free mod. Thanks
You dont need to let the suspension settle that long for something that small
You should unload the spring first, otherwise you will gall the adjustment bolt.
Thanks for the tip, mine weren’t that bad since I had all the weight off the spring. But better safe than sorry
How many turns did you do ? Thanks for the video ...
The bolts are turned all the way unit they don’t turn anymore
Just picked up a 13 GS in Night Race Blue. Did you only drop the rear? And did it affect the ride at all? It looks perfect IMO.
Yes I only lowered the rear. The rear sits about 3/4 of inch lower than stock. It sits perfect in my opinion.
Just subscribed! I need to lower mine
Do you have to have a alinement done on the car ?
Yes, anytime you alter the suspension on a vehicle it’s best to get an alignment.
How does it drive? Any difference ?
Drive as it would stock. Good thing about using the stock bolts is that you can raise it back to stock height in about 10 mins.
Will it work on a c5
Same concept on the c5 keep an eye for out for my upcoming video in my c5z walk around
my gs already grinds in the standard condition. how can everyone always drive it when it's even lower?
When you lower your car you have to adjust your driving techniques. Take dips and speed bumps on a angle. Avoid any steep sudden inclines
I decided that my GS must be lower. How much have you lowered yours? Thats looks pretty good. 1/2 inch to the standard height?
@@toNynho88 I maxed out the stock bolts on the rear. And 1/2 on the front. You can get lowering bolts fairly cheap if you want to go lower. Good thing about it. Is that it’s not hard to adjust ride height. So you can easily adjust til you get your desired stance.
@@quickspoolgarage ok, thanks. Lower than your setup is too low i think. It looks perfect imo
Did you not relieve the leafspring?