I’m going on 70 years old. I had 2 bikes a long time ago. Both were fun. Traffic around here would turn me into a statistic. Bikes are a great way to travel if you are properly outfitted. Your bike here is very interesting.
Great job guys!! If you put your bearings in the freezer over night they will slip in like butter without having to use any heat 😉 builder to builder ❤️🙏 same with those neck races!
Beautiful work on your creation! I bought my XV920RH (chain drive) new in 1981 and I’m still enjoying it all these years later… it has “evolved” mechanically but still wears it’s Hannigan SuperSport fairing and it’s twin cylinder heart still pulls hard!
Guys you have no idea how happy i am watching the determination & the great attention to detail, the passion & hard work, resulting this amazing beautiful bike, keep it up guys, much love from middle east❤️
you've gone to great lengths to video this the way that you have...amazing..probably took as much time to shoot and edit as it did to build....hats off to you!...btw...very cool bike...can't wait to see finished!
Buenos dias. Trabajo estupendo y de gean calidad. Voy a empezar a transformar una Yamaha Virago 1100 del 91 y necesito saber la horquilla que has montado de que moto es. Supongo que sera horquilla, discos y tijas superiores de una misma moto. Gracias.
Hi seat pan and bracket and padding was done by Andrew Nicholls in the UK look for him on FB. He makes great and affordable parts tell him Motow from Dallas sent you there. Thanks!!
Hi guys Keep up the good work just found ur channel today amazing work ✌♥️ just wondering does the R6 front triple tree fit perfectly or some mods needed?
@KARNO17 I would say start with a motorcycle that you really like but also has parts available if not make a list of parts to start searching and ordering ahead of time. Make sure if you need to label anything during the disassembling do it so because by the time you might be putting it back together usually for me is at least months down the road and sometimes doing more than one project at once it gets confusing sometimes . The rest is just enjoying the build as much as you can and don’t worry how good it will look because you will be a lot better on your second bike and so on. Good luck!! Thanks for Watching!!!
@Brad Jean we are in Dallas TX well usually when they are our projects we will sell some of them usually we don’t even have time to enjoy them and they are gone haha 😂 but this one currently is from one of our customer’s but it will run around $14k-$18k with donor motorcycle depending what mods you would like. We do have an extra xv750 all matching numbers ready to be build pretty soon after this one is done.Thank you!!!
@Nigel Breddy yes I custom made the seat and I do have it available on Ebay contact me there if you have any questions : www.ebay.com/itm/185350450914?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=r6FTzjtwTWi&sssrc=2349624&ssuid=&var=693130666226&widget_ver=artemis&media=COPY
Hi seat pan and bracket and padding was done by Andrew Nicholls in the UK look for him on FB. He makes great and affordable parts tell him Motow from Dallas sent you there. Thanks!!
Good evening, I will write from Japan. I'm not good at English, but please forgive me. There is something I want you to tell me. I know that this vehicle is XV750 Billago. What kind of car is the front stem and fork? How many years do you use it? Did you do any more processing? Did you do any processing on the rear swing arm? And what did Riass use? Please tell me as much as you can. Thank you very much.
![BOBBER BUILD - Yamaha Virago 1100 [HD]](/img/n.gif)
as someone who has tried stop motion, the engine dismantling and assembly must have taken a lot of effort!!! Kudos to you for such a great job!!!
Yes for sure lots of work but final result can be great!! Thank you very much!!!
Ditto! I watched that segment thinking, “dang. That took a lot of work”
I learned once: Never use the inner bearing ring to press the bearing into housing.
I’m going on 70 years old. I had 2 bikes a long time ago. Both were fun.
Traffic around here would turn me into a statistic. Bikes are a great way to travel if you are properly outfitted.
Your bike here is very interesting.
Great job guys!! If you put your bearings in the freezer over night they will slip in like butter without having to use any heat 😉 builder to builder ❤️🙏 same with those neck races!
Funny I was thinking the same thing. Why would you heat up the race, making it expand and harder to put in?
I like how the engine opens & fixes itself. That is so satisfying to watch. lol
Hello from Nottingham, UK. This is the best build so far
Thanks!!
Beautiful work on your creation!
I bought my XV920RH (chain drive) new in 1981 and I’m still enjoying it all these years later… it has “evolved” mechanically but still wears it’s Hannigan SuperSport fairing and it’s twin cylinder heart still pulls hard!
FREAKING AWESOME THAT ENGINE time laps
Good job, the bike looks great.
R1 front end, nicely done!!!
Beautiful bike. Awesome editing.
Thank you!!!
Guys you have no idea how happy i am watching the determination & the great attention to detail, the passion & hard work, resulting this amazing beautiful bike, keep it up guys, much love from middle east❤️
It's very rare for a woman to like a motorcycle, even more to ride a motorcycle with her because this one is different.
Wow!! Looking good guys!!! Congratulations on the 50k subs!
Awesome build! Powder coated parts looks so good!
Some real quality building! Can’t wait the final result
Yes we are very anxious as well. Thanks!!
Wow nice moto...
❤️❤️❤️❤️❤️❤️❤️
Brilliant.
Love your work!!
Looking forward to this update. Im about to do the same build.
Que casal foda! Sonho em ter uma xv750 customizada e vocês me inspiram muito com seus vídeos! Parabéns!!!
Can you guys make a video on how you made that seat? It came out really nice!
Great job . A funtastic video 💥💥❤️. Love from india
Thank you!
awesome project!!!
Tell us more about yourself and your shop. Great job.
Q projeto top tenho vontade de montar uma virago 250 aqui no Brasil nesse estilo
Awesome as always
wow esta increíble la pintura electrostática
Nice & profesional video
Good work for the bike
you've gone to great lengths to video this the way that you have...amazing..probably took as much time to shoot and edit as it did to build....hats off to you!...btw...very cool bike...can't wait to see finished!
@ashley Thank you!! We really appreciate your comment!! Should be ready soon.
Parabéns ! a motoca ficou lindona 🏍
Hola, que nivel de trabajo!! Yo estoi haciendo una xv cafe racer, vosotros habeis sido mi inspiracion! Seguir asi, un saludo desde Euskadi!!
Gracias!! Saludos desde Dallas!!
Felicidades maestros que trabajo tan exelente se nota su profesionalismo
Beautiful very nice job my lady❤️🌹
thank you for watching!
Oba... Já tava com sdds.
Obrigado por acompanhar os videos e projetos!
@@motow19 adoro todos. São únicos e lindos. Parabéns.
When installing bearings, it's easier to place them in the freezer, than heat the wheel.
Love your accent
Awesome 😎
Press in bearings using the outer race.
Well done!
Dont install bearings by the middle, use the outer ring.
Awesome build, but had to watch the video on double speed
Super baby
Awesomeness
Magnificent 😍
Saludos
Subbed
I would love some info on how well those mikuni carbs are working over stock
Waw amazing 👍👍
you guys are cool as shit. awesome work
Keren vidionya. tante jozz
Olá para cuando um video de todas as actualizacões efectuadas neste video, banco carbs ...
Excelente trabalho parabens.
Que excelente trabajo!! Que medida de neumáticos han puesto?!
Gracias!!! Delantero 130/80-17 y trasero 130/90-16 los 2 son Metzler cruisetec.
Buenos dias. Trabajo estupendo y de gean calidad. Voy a empezar a transformar una Yamaha Virago 1100 del 91 y necesito saber la horquilla que has montado de que moto es. Supongo que sera horquilla, discos y tijas superiores de una misma moto. Gracias.
Looking great! How is this bike now?
Install the wheel bearing should use the hydrolic pump.
best
Hammer braves Mädchen...
W video
Perfect 🥳😘
Wow beautiful~
What is name gas tank? Which bike..
top cooles Video
Super👏👏👏👍👍👍
Where did you get that tank? Also what metal did you make your seat from? Great video man keep up the great work.
Can you share the specs and seat plans, love the design very similar to the moose design one
Hi seat pan and bracket and padding was done by Andrew Nicholls in the UK look for him on FB. He makes great and affordable parts tell him Motow from Dallas sent you there. Thanks!!
@reuben udayan
facebook.com/andrew.nicholls.52
@@motow19 thank you very much, I really appreciate it
Wow best video so far I’m not even done watching it and I’m leaving the comment already!! Great job guys!! How long did it take to shoot the engine??
Thank you!! I don’t know exactly how long it took but we did it in parts through so many days shooting the disassemble of engine. 👍
😍😍😍
very nice projects, I am also making such a Yamaha virago, maybe you can send a link for the rear shock absorber? thank you😊
W bike
rc Plane in background..crop duster
Do you have to keep the original main wiring harness for the cafe racer build?
No we will make a complete new wiring harness to Munit blue it simplifies everything. Thanks!!
como eu sonho com um projeto desses, mas até a moto é dificil (quase impossivel) de encontrar no brasil.
Hi guys Keep up the good work just found ur channel today amazing work ✌♥️ just wondering does the R6 front triple tree fit perfectly or some mods needed?
I love your rebuilding a bike video a lot. Over in your country does this private built bikes be able to get legal license to operate on the road?
Hey love your videos. just wondering what is the size and make of the rear and front tires?
They look good together
W music
did you anodise or powder coat those fork legs?
The Yomama was an ugly bike before. However, I must say.....it is looking pretty damn good now.
Does are there even any normal viragos left?
Pena que esse modelo não veio pro Brasil
É uma pena mesmo!Obrigado por assistir.
👍👍👍
Can you give some tips for a first time builder?
@KARNO17 I would say start with a motorcycle that you really like but also has parts available if not make a list of parts to start searching and ordering ahead of time. Make sure if you need to label anything during the disassembling do it so because by the time you might be putting it back together usually for me is at least months down the road and sometimes doing more than one project at once it gets confusing sometimes . The rest is just enjoying the build as much as you can and don’t worry how good it will look because you will be a lot better on your second bike and so on. Good luck!! Thanks for Watching!!!
@@motow19 thank you so much
Is there any episode 3??
Waiting for new video
Very soon!! Thank you!!
Great series, you two. What fuel tank are you using?
@Mike Mitchum Thank you!! We are using a 78-79 Kawasaki KZ650sr tank and cap
Question do you sell theses bikes once they are finished and if so what is the cost and where are yall located
@Brad Jean we are in Dallas TX well usually when they are our projects we will sell some of them usually we don’t even have time to enjoy them and they are gone haha 😂 but this one currently is from one of our customer’s but it will run around $14k-$18k with donor motorcycle depending what mods you would like. We do have an extra xv750 all matching numbers ready to be build pretty soon after this one is done.Thank you!!!
👍👊
Did you make the seat yourself, as I’m building a very similar xv920 and looking for this exact seat?
@Nigel Breddy yes I custom made the seat and I do have it available on Ebay contact me there if you have any questions : www.ebay.com/itm/185350450914?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=r6FTzjtwTWi&sssrc=2349624&ssuid=&var=693130666226&widget_ver=artemis&media=COPY
Awesome, thanks
What wheels and tires are you using? Specs?
How did you paint engine ?
From which bike does the rear shock came from??
tết coi hài cho vui nhà vui cửa
Hi, where did you fabricate the seat bracket and the seat?
Hi seat pan and bracket and padding was done by Andrew Nicholls in the UK look for him on FB. He makes great and affordable parts tell him Motow from Dallas sent you there. Thanks!!
@Duclife
@@motow19 hi for some reason I cannot find him. Is under a different name? Like the shop? Is he on IG?
Ok try this link facebook.com/andrew.nicholls.52
Good evening, I will write from Japan. I'm not good at English, but please forgive me. There is something I want you to tell me. I know that this vehicle is XV750 Billago. What kind of car is the front stem and fork? How many years do you use it? Did you do any more processing? Did you do any processing on the rear swing arm? And what did Riass use? Please tell me as much as you can. Thank you very much.
que hermosa moto, como puedo hacer para obtener una igual soy de _Peru...................
👍bya mirsi boko
Which front fork?
What year are yamaha 750.?
What’s the tire size on it?
Episodio 3 ??
Very soon
How much cost like this bike??
All done with parts and labor $15k