To me that 10 speed really matches that engine because i've seen the 6 speed manual topped out really easy with alot of torque still available for more gears
@@marxxmann8758 I don't think you understand how gear ratios and how gear reduction works. The stock 6 speed that a 99 Dodge came with had an O/D gear ratio of 0.73:1 on a fuller Eaton 10 speed O/D (what the truck in this video has) has a gear ratio in 10th gear of 0.78:1 so the transmission in this truck actually "Tops out" sooner than the stock 6 speed. The entire point of a 10 speed is a gear reduction NOT an gear overdrive.
@js6729 so many people struggle with understanding transmissions and what final drive means lol I've explained the difference between the NV4500 and NV5600 probably a million times, and it always falls on deaf ears. Same with the difference between 8,9,10, 13,14,15,18 speed transmissions lol
Nice little dozer he has as well. Case developed the 6BT and the 4BT along with Cummins to go in there equipment. Will never be a better diesel engine built than those two.
The 6-sp manuals they put in with the 24v are actually great transmissions, I believe they were the only one the could handle the crazy torque of the Cummins. Now if you're talking about the Getrag 360 5-sp in the 1st gens, those aren't known for quality.
@@levilatham4701 well the nv45 and 56 and g56 are great, built 48s are great, literally only the early ones were bad, besides the sticks in the Duramax and powersmokes really aren't though at all
***** Actually no I still rebuild my transmissions at regular intervals and they show no signs of additional wear. As long as you don't force the trans into gear and rev match properly it causes no issues
Man , no matter how many times I watch this vid it is just as cool as the time before!!😀👍 I used to drive class 8 semis and tri-axles and I still think this is freakin AWESOMEEEEE!! Sir you should be extremely proud of your rig, I know I sure as heck would be!!!🙂👍
Really simple conversion just hunt down the parts, looks like he is using a RTO overdrive 10 spd due to the U shifting pattern verses the standard H pattern. Good stuff!
I love all the know it alls and haters maybe he wanted to build his truck this way as everybody else builds theirs to look like the next guys and there's nothing wrong with the stacks at least there on a working truck not some mall cruiser with 24s and a huge lift that don't go off-road or tow anything and as you see his mirrors are up cause he's towing not because he wants to look cool lol
"His mirrors are up cause he's towing not because he wants to look cool". The LAST thing these kids look like when they have their tow mirrors out on a 1500 mall cruiser is "cool". They look like morons!!
The mirrors up give the best visibility of blind spots regardless if your pulling a trailer or not. So I don't feel bad for thise who don't flip up their mirrors then side swipe someone on a motorcycle or in a small convertible and get their asses sued.
I just love when he steps on it right at around minute 4:01.. sounds beautiful!! I’m so curious to know how did y’all fit that Eaton fuller under that frame, what kinda mods or tranny kit did y’all have to do to or use to make it work?
I have been thinking of doing a ten or thirteen conversion to my 95 3500. It's a hay hauler and a equipment mover..and I also drive commercially..but I love the setup man! Post some more videos! I can't get enough of them!
@@ldbrush9941 I have an NV5600 in my 02 3500 with 4:10's I would absolutely LOVE to have a 10 speed in that truck!!! Don't get me wrong, the six speed is a great trans, just that it needs more gears! When towing on the interstate, you have to drop to 50 MPH before down shifting to 5th ! I mean for Christ sakes, they are putting 10 speed automatics in F-150's What the fuck do need a 10 speed in a half-ton for anyway???? But you can't barely even buy a standard trans truck anymore! WTF is wrong with these manufacturers ? they say their trucks will haul 30,000 pounds, but you can only get an auto?
10 speeds sound cool for a pickup, but the thing is if you can't pull the weight with the factory trans, then you don't have the brakes to then slow it back down effectively. Work within the total mechanical limits of your rig, not just base it on power and gears. If you gear it right, that 6bt cummins can pull 100k plus, but obviously handling and braking are effectively non existent.
Clutch?? We don't need no stinking clutch. Ok except for starting out. Then the beauty of floating through the gears. Listen to that beautiful diesel purrrrr
what gear ratio are you running. whats your rpms at 70 in 10th gear. i swapped my auto for a g56 on my 05. truck is sweet! your model truck is the best looking truck dodge made. in my opinion that is.
the most beautiful thing I've ever heard Cummins love ... and that transmission is super .. Too bad you don't have photos or videos of your modifications ... greetings
@Nippsta Collins no, it’s a 1 ton truck pulling close to its weight limit and depending on the state if your over a certain weight or a certain length then you need to have a cdl, educate yourself before making comments
No, it's a 10 speed with an overdrive. In a fuller 10 speed if you add an O/D direct drive stays in the same position and the O/D takes the place of 4th/9th gear.
Wow that Cummings Engine sounds so sweet together what a nice package and I see you can walk the gears now that's awesome great job thanks for sharing. I have a Dodge Ram 1500 that I'm pulled the junkies automatic out of and I'm putting a 5-speed into right now, too bad you didn't do the build video I would have loved to see how you did it, I imagine it's just a adapter plate modifications to the Driveline and rear end change?
Now that’s a cool hotshot truck! I didn’t know you could put a semi transmission behind the 12v Cummins. Do you run an air compressor for the hi/low selector?
Seems like a nice set up, lovely smooth shift,I'm curious as to what motor you got mated to the Eaton 10 speed, sounds a bit deeper than the 6 litre job, or would that be that lovely stack you've got on it that gives it that nice growl.
You have a real nice truck. I was just wondering if the truck was really that weak that you had to put the 10 speed in or if you was trying to make it just a little better and stronger? Cool truck. Its good to see the older trucks still on the road.
Eaton found in most BIG RIGS. 13 SPEED BETTER THEN 10 in most trucks.WOW that must have been a hell of a lot work to get it in the dodge.Great work men 👍
its that an electronic transmission cause never see you use the hi-low selector and also you will need of course air to run a regular 10 eaton transmission please reply
Lovely c9nversiin, I'd do the same no Def or emissions in that year! Most hotshotters make mistakes in drive trans and operating their pickups because they didn't have big truck experience. This is what I read in the comments for hotshotters.
RGH Nutrition I just bought a Cummins, an 73 Crew Cab 2500, and a 98 Crew Cab 3500. I’m going to use the 3500 Frame, the Cummins, and the 73 body to make an old looking but well functioning beast. I’m going to try to get a 10 Spd and keep the 4x4, so I’ll make a video or 10 when I get to building it.
@@lanceroark6386 that's fucking crazy haha... I was doing some googling before and I saw a huge write up of a guy and he examples how to do it all step by step.. such a big process
RGH Nutrition yeah, I’m kinda not looking forward to it. I went with an old body so that I don’t have to keep the electronics, which will make the swap a lot easier.
I wonder what model Fuller 10 speed he used? It probably weighs a lot more than a NV4500. I wonder if it saves any fuel since it probably has more frictional losses.
Really need more videos on this to get me to subscribe. You shoiod post a how to and what one needs to do this. Also thays air shift transmission right? Hows the air hooked up?
I should probably be looking for a 10 speed. Instead of rebuilding my nv4500! The way this sounds, I could listen to this all day! and to all the haters,they're just jealous!! Haha.
@@ppump24valve53 understandale... But if you really want the extra gears I you have a 4 speed like a Muncie sm465 or t18 Advance adapters has 2 speed auxilliaries with direct and OD ... It adds a second stick so you end up shifting like an old school trucker.. but it gives you 8 forward gears.. 2 in reverse 27% reduced engine RPM..... it only wieghs 80lbs. Its only 7" long it only costs &1500 and will fit in pretty much everything...... Gearvenders has a really cool planetary settup that does the same!e thing but it's is electronically shifted and costs like $3000
clearly a very experienced driver. very smooth shifting under power and down shifting. Great Setup!! Pulled that load perfectly!
Advanced Nutrition Inc if you drive a tractor trailer your doing like 1000s of these shifts a day lol. It’s great practice
Lol you pickup truck drivers are so used to cutting people off you think simple floating is wizardry
@@headlesnorseman701 good point!
I dunno the amount of times he’s on the clutch break while stopped doesn’t scream experienced…….
@@given_it_a_go9801ummm you're supposed to have your clutch pushed in while your stopped
To me that 10 speed really matches that engine because i've seen the 6 speed manual topped out really easy with alot of torque still available for more gears
A 10 speed isn't geared higher than a 6 speed 1-5 is a 3-1 gear reduction, the final drive ratio is actually about the same.
@@js6729 I bet you have driven vehicles whereas the last gear was topped out easily as if the engine is calling for another gear
@@marxxmann8758 I don't think you understand how gear ratios and how gear reduction works. The stock 6 speed that a 99 Dodge came with had an O/D gear ratio of 0.73:1 on a fuller Eaton 10 speed O/D (what the truck in this video has) has a gear ratio in 10th gear of 0.78:1 so the transmission in this truck actually "Tops out" sooner than the stock 6 speed. The entire point of a 10 speed is a gear reduction NOT an gear overdrive.
@js6729 so many people struggle with understanding transmissions and what final drive means lol I've explained the difference between the NV4500 and NV5600 probably a million times, and it always falls on deaf ears. Same with the difference between 8,9,10, 13,14,15,18 speed transmissions lol
10 speed has the same or less gear ratio than that if a 6 10 speeds are for triple the pull power
one of the best sounding cummins I've ever heard
Did you watch the "1993 w250 hauling with straight pipe stacks" the sound on that one👌🏽
Nice little dozer he has as well. Case developed the 6BT and the 4BT along with Cummins to go in there equipment. Will never be a better diesel engine built than those two.
Amazing driving skills, this guy knows how to drive .!!!
Bad ass truck. Hands down the cleanest set up. Love that 10 speed
That's great. I wish they would just make the hotshot trucks like this from the factory
I just ordered the truck without engine and transmission
@@justanotheraviator2357 from a junkyard.?
@@santiagodavila1426 from factory
@@justanotheraviator2357 so just buy the shell.?
@@santiagodavila1426 kind of, yeah, my last truck I bought whole and sold the stuff I took out. This one I ordered special.
Now that is cool, that is the right transmission to have behind that motor not that piece of crap that Dodge put in there !!!!
The 6-sp manuals they put in with the 24v are actually great transmissions, I believe they were the only one the could handle the crazy torque of the Cummins. Now if you're talking about the Getrag 360 5-sp in the 1st gens, those aren't known for quality.
@@bendutton17 agreed, I loved the NV5600
Nv5600 is a bulletproof trans imo
“The crazy torque of Cummins” you people crack me up with your excuses for sorry transmissions.
@@levilatham4701 well the nv45 and 56 and g56 are great, built 48s are great, literally only the early ones were bad, besides the sticks in the Duramax and powersmokes really aren't though at all
I'd like to see someone try to shift this who has only driven syncro transmissions.
I only drive syncros but I never clutch shift I always float the gears
That's terrible for your syncros
*****
Actually no I still rebuild my transmissions at regular intervals and they show no signs of additional wear. As long as you don't force the trans into gear and rev match properly it causes no issues
They are teaching me to only double clutch in my Cdl classes
That's dumb
This outfit would give a jellyfish a hardon. Sounds to be well matched. Cheers from an Aussie
Man , no matter how many times I watch this vid it is just as cool as the time before!!😀👍 I used to drive class 8 semis and tri-axles and I still think this is freakin AWESOMEEEEE!! Sir you should be extremely proud of your rig, I know I sure as heck would be!!!🙂👍
God DAYUM I love the sound of a 6bt. Best sounding diesel EVER built.
Esas si son trocás y muy buen conductor no me canso de ver ese video saludos de su amigo Beto Pérez de las Nieves Dgo échenle ganas
What an excellent conversion this thing will work its ass off I've got to build one!👍👍
Man I love the whine on that Eaton 😍 reminds me of my childhood days of going trucking with my dad
That is just too awesome!!
FriscoBoater o9
That's what i think. Purdy cool.
Really simple conversion just hunt down the parts, looks like he is using a RTO overdrive 10 spd due to the U shifting pattern verses the standard H pattern. Good stuff!
This guy's over here, no-clutching, putting everyone to shame...
I love all the know it alls and haters maybe he wanted to build his truck this way as everybody else builds theirs to look like the next guys and there's nothing wrong with the stacks at least there on a working truck not some mall cruiser with 24s and a huge lift that don't go off-road or tow anything and as you see his mirrors are up cause he's towing not because he wants to look cool lol
No bullshit here. Straight to the point. No lies! I like it.
No lies detected
"His mirrors are up cause he's towing not because he wants to look cool". The LAST thing these kids look like when they have their tow mirrors out on a 1500 mall cruiser is "cool". They look like morons!!
@@mattywho8485 Dodge mirrors are like women....they flip out for no reason....
The mirrors up give the best visibility of blind spots regardless if your pulling a trailer or not. So I don't feel bad for thise who don't flip up their mirrors then side swipe someone on a motorcycle or in a small convertible and get their asses sued.
10 speed cummins dually I never seen a 10 speed cummins manual dually and I like the sound of it
them stacks sure do sound good👍🏻
Not a truck guy in the slightest, but I always enjoy these videos.
I just love when he steps on it right at around minute 4:01.. sounds beautiful!! I’m so curious to know how did y’all fit that Eaton fuller under that frame, what kinda mods or tranny kit did y’all have to do to or use to make it work?
That's putting the Eaton to great use. Good truck choice to put it in also!
I have been thinking of doing a ten or thirteen conversion to my 95 3500. It's a hay hauler and a equipment mover..and I also drive commercially..but I love the setup man! Post some more videos! I can't get enough of them!
Seems like overkill, I would rather go with a NV5600. A MUCH better trans than the five speed and better gear splits to boot.
michael dill You could also do an Eaton Fuller 7 Speed, might be better than a 10 for a one ton pickup
@@ldbrush9941 I have an NV5600 in my 02 3500 with 4:10's I would absolutely LOVE to have a 10 speed in that truck!!! Don't get me wrong, the six speed is a great trans, just that it needs more gears! When towing on the interstate, you have to drop to 50 MPH before down shifting to 5th ! I mean for Christ sakes, they are putting 10 speed automatics in F-150's What the fuck do need a 10 speed in a half-ton for anyway???? But you can't barely even buy a standard trans truck anymore! WTF is wrong with these manufacturers ? they say their trucks will haul 30,000 pounds, but you can only get an auto?
@@mattywho8485
The reason why is it seems that driving a vehicle with a clutch is getting to be a lost art.
10 speeds sound cool for a pickup, but the thing is if you can't pull the weight with the factory trans, then you don't have the brakes to then slow it back down effectively. Work within the total mechanical limits of your rig, not just base it on power and gears. If you gear it right, that 6bt cummins can pull 100k plus, but obviously handling and braking are effectively non existent.
Finally someone knows how to shift
Let's see him shift a twin stick with a Detroit pullin
@@matthewgrimm5383 twins aren't that hard unless its a quad
@@codcade hes talking about twin stick in a semi truck you fuckin moron
Fuck yeah love that turbo sound. Nice rigg.
Clutch?? We don't need no stinking clutch. Ok except for starting out. Then the beauty of floating through the gears. Listen to that beautiful diesel purrrrr
what gear ratio are you running.
whats your rpms at 70 in 10th gear.
i swapped my auto for a g56 on my 05. truck is sweet! your model truck is the best looking truck dodge made. in my opinion that is.
Let me guess.. you didn’t search to watch this but you liked it
the most beautiful thing I've ever heard
Cummins love ... and that transmission is super ..
Too bad you don't have photos or videos of your modifications ... greetings
4:03 to end: music to my ears 😍😍😍😍
Eaton Fuller best trans. on the market. Drove a Mack and Freightliner with EF trans. it was like buttah!
Wish there was a cheap and easy way to do this and keep 4x4. Id do this in a heartbeat. My nv4500s going out for the second time
There is just run a divorced NP 205 transfer case.
OMG I would kill to have this truck. I love how he shifts very cool...
Love it. This is also the only time your mirrors should be flipped out. When you’re actually towing
Caleb Brehm Thank you! I laugh when I see some guy pulling his craftsman riding mower on a single axle trailer with the mirrors flipped out
Bad ass rig and nice shifting. That shifter is tight as hell.
Oh god the debate on using the clutch .......someone graduated from swift ......
A real truck driver
Someone didnt know that its not a synchronized trans
And i believe all swift trucks are utlrua shifts
Except Swift has no manuals any more so using the clutch is a little past most of there education
@@johnmonteith2585 docking and parking lot travel are past their education
That’s just freakin’ AWESOME!!
When you couldn't get your cdl lol
I mean in most states you still need one to do something like this
If it’s commercial you still need it. Private use no.
He definitely has a cdl
@Nippsta Collins no, it’s a 1 ton truck pulling close to its weight limit and depending on the state if your over a certain weight or a certain length then you need to have a cdl, educate yourself before making comments
You think this is any different? And he probably does have one. Cdl is for weight class not type of truck you use jackass
Great job with your truck!!!
Nice sound of your truck. very impressive...
Thats badass for sure. Sounds nasty..all hes missing is a jakebrake and a airhorn
Nice Cummins sound!!!
That's awesome my other diesel mechanic bubbies are going to love this.
Thats not just a plain 10 speed its a turn around 10..nicely done
It's a regular 10 he's skipping 4 gear
No, it's a 10 speed with an overdrive. In a fuller 10 speed if you add an O/D direct drive stays in the same position and the O/D takes the place of 4th/9th gear.
Wow that Cummings Engine sounds so sweet together what a nice package and I see you can walk the gears now that's awesome great job thanks for sharing. I have a Dodge Ram 1500 that I'm pulled the junkies automatic out of and I'm putting a 5-speed into right now, too bad you didn't do the build video I would have loved to see how you did it, I imagine it's just a adapter plate modifications to the Driveline and rear end change?
Now that’s a cool hotshot truck! I didn’t know you could put a semi transmission behind the 12v Cummins. Do you run an air compressor for the hi/low selector?
SAE flywheel housing for a 5.9 is all you need to bolt it on. A dodge transmission flywheel housing uses same bolt pattern block side.
The 99 is a 24 valve because in 98.5 they changed from 12 valve to 24 valve
Not a 12 v
To answer your question, yes you would have to add on board air for the range selector to work
Oh hell no. I used to drive a 10 speed Mack in and around DC. Last year I got a new automatic Mack and love it. I don't ever wanna shift gears again.
Till you go somewhere with hills or mountains. Youd never want an auto again
Bad ass man nice truck
Cool truck That would be great to tow a 5th wheel camper. The addition of a Jake on it would be great too.
Seems like a nice set up, lovely smooth shift,I'm curious as to what motor you got mated to the Eaton 10 speed, sounds a bit deeper than the 6 litre job, or would that be that lovely stack you've got on it that gives it that nice growl.
Its a 1999 so it would be a 5.9L 24 valve Cummins. Unless its been swaped.
Well that combo sounds perfect... and those stacks
You have a real nice truck. I was just wondering if the truck was really that weak that you had to put the 10 speed in or if you was trying to make it just a little better and stronger? Cool truck. Its good to see the older trucks still on the road.
Bad Ass!! Not to much smoke either. Nicely tuned.
I love this set up! How do I search for someone help me to convert my truck?
East bound and down. A real gear jammer. Love it
Ohhh yeah 👍👍 music to our ears guys....
AWESOME MAN!! I really wanna buy that truck!! I really really need it in my ranch 🤠
I've watched ur vid 15 times can't get enough
how's she stop?? cause she can sure pull!!! what a beast
She go
Well thats the coolest thing I've seen, you win youtube.
hands down u hear that turbo eeeewhooooooo
beautiful sounding beast
Eaton found in most BIG RIGS. 13 SPEED BETTER THEN 10 in most trucks.WOW that must have been a hell of a lot work to get it in the dodge.Great work men 👍
I’d love to see how he done the transfer case...I’d do my truck the same way...
its that an electronic transmission cause never see you use the hi-low selector and also you will need of course air to run a regular 10 eaton transmission please reply
Eduardo silva he shows the air pressure gauge up towards the headliner and I can only assume he hasn't hit speed to need high gears but idk for sure
4:36 you can see he's in HI
Yes I see him go hi also
If you watch towards the end of the video, he did get up in high range by a couple of gears before needing to down shift for the next intersection.
very nice, fantastic match between motor and gearbox.
I miss hearing the stock charger wind down through my stacks :/ a true downside to compounds
Well played well done. Nice conversion
hey so how did you get the ranger button to work? did you add an air compressor? and if so what is the required psi to keep it operable?
The big rigs that use the same transmission use fuel truck air pressure which is about 120 psi. Most transmissions need at least 60 psi to work right.
Lovely c9nversiin, I'd do the same no Def or emissions in that year! Most hotshotters make mistakes in drive trans and operating their pickups because they didn't have big truck experience. This is what I read in the comments for hotshotters.
Do you have a video that shows how the 10spd was attached, or how you kept the 4wd?
Also like to know as I want to do this myself
RGH Nutrition I just bought a Cummins, an 73 Crew Cab 2500, and a 98 Crew Cab 3500. I’m going to use the 3500 Frame, the Cummins, and the 73 body to make an old looking but well functioning beast. I’m going to try to get a 10 Spd and keep the 4x4, so I’ll make a video or 10 when I get to building it.
@@lanceroark6386 that's fucking crazy haha... I was doing some googling before and I saw a huge write up of a guy and he examples how to do it all step by step.. such a big process
RGH Nutrition yeah, I’m kinda not looking forward to it. I went with an old body so that I don’t have to keep the electronics, which will make the swap a lot easier.
@@lanceroark6386 been keen to watch the build.. then I can show the people at the trans joint and be like this is what you gotta do.. hahaha
I wonder what model Fuller 10 speed he used? It probably weighs a lot more than a NV4500. I wonder if it saves any fuel since it probably has more frictional losses.
Does anyone know where i can get this conversion done at?
The Little Cummins That Could lol. Love it because its something a mechanic would do if they lost their minds.
Cool for long haul highway stuff but man I wouldn’t wanna drive it in any town
So don't!
If you're driving around town unloaded, you just skip gears and you it's a simple pattern.
That’s a true daily tow rig
Allison ain't got shit on a fuller!! Cool vid and truck
Why would a dodge have an Allison transmission that's a Chevy trans
I'm simply saying with one I think is better. Dodge does not come stock with a fuller trans
I know it doesn't come stock with one and don't get me wrong Allison's r good transmissions but I still don't see why put it in a dodge
Cause they come with shitty trans.
He put the fuller in the dodge not an allison
I would have put an 8LL in it, they are bullet proof but still a good choice . Sounds very good .
And over at the Toyota showroom they are featuring the Hybrid Pius.
😂😂😂
Good looking rig !!
after 3 NV 4500 i should of put a 10 speed in, to much shifting for me,
Do a nv5600 6 speed
@@cumminssmoker2456 Agreed! The 5600 out weighs the 4500 by like 150 pounds! much beefier than the 4500
I would love to learn how to use a transmission like this. Shit is dope🤙🏼
He was driving through westmoreland tn. I live there and noticed everything lol. Nice truck.
I want this guy to build me a truck. Great job.
My question is how is he shifting when he is moving without pushing in the clutch?
no syncros
You can do it in any transmission, syncro or no syncro.
Rick1885 you can, but its terrible on your transmission synchronizers!!
helmincamaro I'm pretty sure that these Eaton Fullers aren't synchronized. Regular cars and pickup trucks are, however semis aren't.
john huber big trucks only use the clutch to start out and stop
I think it's cool. I wouldn't want one because I drive semi already. But still awesome 👌
Can you post another video?
wonder if this truck is still on the road.
Sure sounds awesome going through 7 gears lol what's it like doing 70 in 10th ?????????
That's pretty fucking cool.
If you can't find Em grind Em. 😂
Mendigo troconon con 10 velocidades muy buena conversión
Notice at 3:10 he doesn't push the clutch to shift
john huber you dont need the clutch to shift you only do it with the gas
Goes to show the best synchros are between your ears. Very smoothly done!
Very good......
No syncros in the transmission. You the operator are the syncro.
Really need more videos on this to get me to subscribe. You shoiod post a how to and what one needs to do this. Also thays air shift transmission right? Hows the air hooked up?
I put a 13 speed in a 96 dodge 2500 I wish I would have taken a video of it. It would pull anything.
How hard was it to do..any big mods to do
How freakin cool I'm a big truck gear head at heart would love to see the install
The transmission cost about 3500 dollars
Which transmission is it, please reply.
Man that’s awesome 👏🏽. Great video
Yes u can keep it 4x4
How did you make the 4wd still work? Did you have to use a divorced transfer case?
how did u get it to boult up
This is the coolest truck...i also own a 2002 4x4.
I am interested to buy your truck if its for sale.....
Text Joe 519 321 9698
Jesse Vasquez divorced transfer case most likely
Como adaptaron El 4x4 utilizando un transfercase divorciado? Puede brindarme fotos? hatikva777@yahoo.com
I should probably be looking for a 10 speed. Instead of rebuilding my nv4500! The way this sounds, I could listen to this all day! and to all the haters,they're just jealous!! Haha.
G56 or Spicer 7 speed would be an easier fit.... And you wouldn't need an air system to shift
1952PETERBILT350 I don’t even haul that much, so it wouldn’t’ really be worth it anyway.
@@ppump24valve53 understandale... But if you really want the extra gears I you have a 4 speed like a Muncie sm465 or t18
Advance adapters has 2 speed auxilliaries with direct and OD ... It adds a second stick so you end up shifting like an old school trucker.. but it gives you 8 forward gears.. 2 in reverse 27% reduced engine RPM..... it only wieghs 80lbs. Its only 7" long it only costs &1500 and will fit in pretty much everything......
Gearvenders has a really cool planetary settup that does the same!e thing but it's is electronically shifted and costs like $3000