Solidworks Quick Tip #2 : Autotrace Sketch Picture

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 54

  • @heardashot
    @heardashot 8 місяців тому +4

    Thanks for the clip, hugely helpful. I can get to 1.03 on your video but don't have that option to press, what am I missing? Thanks again.

  • @strage88
    @strage88 3 роки тому +6

    Unable to extrude feature due to geometric conditions

  • @tai6100
    @tai6100 3 роки тому +11

    Thank you so much! This video helped a lot I really appreciate it. This deserves a like 👍

  • @rawanbabelli4029
    @rawanbabelli4029 3 роки тому +4

    I don’t find the picture in solid works, what should I do??

  • @joey74261
    @joey74261 2 роки тому +7

    Not able to select sketch picture, and yes I did add auto trace. What can I do?

  • @Drdestruction_27
    @Drdestruction_27 2 роки тому +2

    Please tell me how to enable it it can't be enabled in 2021 solidwork please reply

  • @TrongNghia1304
    @TrongNghia1304 9 місяців тому

    Cám ơn bạn, nhanh, gọn và dễ hiểu. Chúc bạn nhiều sức khỏe!

  • @cadcaetutorial2039
    @cadcaetutorial2039 9 місяців тому +2

    This lecture is very nice sir

  • @rggot2relax
    @rggot2relax 8 місяців тому

    My picture turns grey if I go to the second page in Sketch Picture. I've activated the add-in but it doesn't work with multiple files. If someone knows why please tell me. Thanks.

  • @Creative_3DPrinting
    @Creative_3DPrinting 10 місяців тому

    Thanks a lot, exactly what I needed :)

  • @AmelAmel-lk1vt
    @AmelAmel-lk1vt 3 роки тому

    thank you for this video
    i want to use an offset on the edge of the image but it doesn't work like this?

  • @mohamedashif8710
    @mohamedashif8710 3 роки тому +5

    In addins there no option like that auto trace what to do reply me

  • @Mr.XYZ6775
    @Mr.XYZ6775 5 місяців тому

    Thanxs, I didn't know I had that command. it helps me a lot in what I'm doing.👍

  • @fikrifathoni_te6574
    @fikrifathoni_te6574 4 роки тому +1

    why my sketch picture disabled , do u know why ?

  • @agungbachtiar4293
    @agungbachtiar4293 3 роки тому +1

    How add dimension for logo?

  • @cadcaetutorial2039
    @cadcaetutorial2039 9 місяців тому +1

    Very perfect this tutorial sir

  • @wolftutor
    @wolftutor 2 роки тому

    Can that sketch be extruded?

    • @noirzg9184
      @noirzg9184 2 роки тому

      Yes dude, Tools > Sketch tools > 2D to 3D > Extrude. If it doesn't let you extrude the line, unselect the "Merge" square, hope it works

  • @Crowe0920
    @Crowe0920 Рік тому +1

    I cant get my sketch as clean as yours

    • @dheerchoudhury2751
      @dheerchoudhury2751 Рік тому +3

      I had the same issue. If our problems are the same, then just expand the image much, much bigger than you actually want it, and then do the image trace thing. Gets much more accurate. Then you can resize/reposition as needed.

    • @zmanhuber6924
      @zmanhuber6924 Рік тому +1

      @@dheerchoudhury2751 holy crap I feel stupid. Thanks for the help!

    • @dheerchoudhury2751
      @dheerchoudhury2751 Рік тому

      @@zmanhuber6924 Nah nah ur good...took me a while to play around with it to get it lol

    • @brendenwestphal1571
      @brendenwestphal1571 11 місяців тому

      @@dheerchoudhury2751I tried scaling my picture bigger but still isn’t making a difference for me. The lines are still way off from the picture. Am I doing something wrong?

  • @harveymorei1153
    @harveymorei1153 9 місяців тому

    Thank you for the trick

  • @arpa7326
    @arpa7326 3 місяці тому +1

    you are atomic bomb) thank you very much!

  • @BNT_Mechanical
    @BNT_Mechanical 3 місяці тому

    thank you very much. very good

  • @charlestoneoyoo
    @charlestoneoyoo 4 місяці тому

    Epic 🎉

  • @IslomjonMamadaliyev-p5o
    @IslomjonMamadaliyev-p5o 5 місяців тому

    Thank you very much.

  • @JAYTHEGREAT355
    @JAYTHEGREAT355 8 місяців тому

    Good work

  • @adelyamahai5573
    @adelyamahai5573 2 місяці тому +2

    thank

  • @tile996
    @tile996 3 роки тому +5

    This intro tho.

  • @rafaelsanchesfernandes
    @rafaelsanchesfernandes Рік тому

    Thanks a lot!

  • @amirullahnasir7963
    @amirullahnasir7963 10 місяців тому +1

    Thengkyu

  • @Enes_Yildiz
    @Enes_Yildiz Рік тому

    Thank you so much

  • @xxclipsxx9967
    @xxclipsxx9967 3 роки тому +1

    I hope Jared Goff succeeds in Detroit

  • @joelcgPR
    @joelcgPR 8 місяців тому

    POWERFUL

  • @Wolfhunter666
    @Wolfhunter666 9 місяців тому

    awesome

  • @jeanbatipste3141
    @jeanbatipste3141 Рік тому

    why my trace is a shit!":P i wan to do a letters, but not even close with the trace, y play with the settings but nothin, my image is 4k !:P

  • @tylerthomas709
    @tylerthomas709 2 роки тому

    thats dope

  • @JohnAndrewMetza
    @JohnAndrewMetza 4 роки тому +7

    Why did you make a 2020 video with SW 2016? For nostalgic reasons? Help me understand your logic.

    • @paulanderson7077
      @paulanderson7077 Рік тому +15

      “Why did you make a trace of a lion? For lion reasons? Help me understand your logic.”
      “Why did you use the front plane to sketch? For front affiliation reasons?Help me understand your logic.”
      “Why did you extrude it 10mm instead of 15? For even number reasons? Help me understand your logic.
      “Why did John Metza make a useless comment on a useful video. For petty reasons? Help me understand your logic.”

    • @JAYTHEGREAT355
      @JAYTHEGREAT355 8 місяців тому +3

      Gay comentario

    • @rithindas72
      @rithindas72 8 місяців тому

      ​@@paulanderson7077😂😂😂😂

  • @TRUNG_PIU_PIU
    @TRUNG_PIU_PIU Рік тому

    THANKS U

  • @Patrick-ef1nn
    @Patrick-ef1nn 4 місяці тому

    #ONEPRIDE

  • @sinanelci2382
    @sinanelci2382 12 днів тому

    ua-cam.com/video/c36zrfRE2Ww/v-deo.html

  • @Scape3183
    @Scape3183 4 місяці тому

    This tool is total CRAP!!! Has never worked right.

  • @JohnAndrewMetza
    @JohnAndrewMetza 4 роки тому +7

    The music and fancy intro graphics do nothing for the tutorial but waste our time.