The 5MGE was used from 1982-86 Supra and the one you are showcasing here is from an 82 or 83 as it has the early style harmonic balancer with multiple V belts versus the 84-86 models which used a multi-ribbed serpentine. This also means it has the low compression (8.8:1 ) pistons. And yes @3 minutes it is a fuel filter, charcoal canister is separate unit located on passenger's side frame rail. No Supras were ever carbureted by the way, they were all EFI f rom 1979+. The 6MGE and early 5MGE share the same low compression piston but the 6MGE has a 9.2:1 ratio due to it's longer stroke. It's a common mod for 6M builds to use the later model 5MGE 9.2:1 pistons to effectively make the 6MGE around 9.8:1 or so. Great video, thanks for sharing!
Thanks for the input. I meant that earlier m-series of engines were carburated. I person I got it from said it was in an 86 but it must have originally came from an 83 or something.
Forgot about the 5me that was sold out side the states. It came carbed in the crown, cressida and supra. Those were available from 79-88 but at some point they ran an odd efi like system but it was still a carburetor fed engine.
Actually two sizes of Torx, an 11 millimeter, a Phillips, eight drill bits and three days just for a thermostat. Oh yeah, an assortment of four letter words.
Wow what a great video, thank you. I had two Supra's from 1986-1987 and they both experienced head gasket issues, fortunately I had a great independant Toyota mechanic who was able to fix that for a sensible price. Both mine were the 3L variant that was sold in the UK. These engines were super smooth, and the Supra was about the most amazing car I have owned and I have owned a LOT of cars.
My second car was a copper colored 82 Supra with leather interior and the digital dash. I loved that car so much I got a job at the local Toyota dealership and became the 5MGE specialist. I can't remember any failures other than a cracked head and a TSB about the cams and cam towers for the 82 and some 83 models which was oiling passages being too small. I could balance a nickel on edge and rev to redline without it falling over.
Back in high school (1989) one of my best friends had a 1983 Toyota Celica Supra with this engine. I remember that timing belt cover and that "DOHC" valve cover. That engine was butter smooth, and had plenty of power.
my first car was an 84 supra and the previous owners had driven over 2k miles with a bad head gasket before i got it, smoked like hell but still ran like a champ
Lol, loved it! I do the same (on my stuff) as the connectors/harnesses need to be good after repair... best way to make new ones, cut the old ones off and put aside for wife to duplicate wiring harness ; ) But customer car... they don't want to pay for the time/cost, usually. Epic to put in vidy, tells volumes.
You provide tons of rt time info quickly and effectively. Well worth watching to plan a job and save time if you have not done the particular job before.. And great for those learning after basics. Keepem coming.
Love the idle purring of the 5MGE. It was the the first and only engine I ever changed the timing belt DIY. It took me two days but it was a successful project. I still missed the 1985 Celia Supra P Type 5-speed 😞.
I love this tear down/ analysis of certain engines. Would you possibly do one of the Om606? It’s also a straight 6 from 90’s-00’s from Mercedes, but it’s diesel wanted to compare and contrast the two engines, but most people don’t even know if the Om606. :) greatly appreciated if you can, but if not still loved this video, thank you!
In japan they use a screw called JIS which is what those cam cover screws could be, JIS looks very similar to Philips screws on the face but geometry is very different. JIS is also the reason why a lot of people have problems with stripping disk retention screws on Toyota's as they are using Philips and not a JIS.
The oil pressure regulation for the block is actually done right there on the pump! The 22mm hex bolt with the hole in it contains the initial pressure relief valve. The one on the head is closer to an Oil Control Valve to prevent flooding the cam towers and hydraulic lash adjusters.
Hey mate. I just wanted to say that you are the best mechanic on UA-cam I've ever seen. Thank you so much for your effort, you are legend 👍 also I want to send you a box of tooth brushes and a bag of undies to say thank you 😁 but my local post office here in Melbourne - Australia is closed today 🥴 THANKS AGAIN MATE 👌
Very educational, funnily enough, the only two videos I have seen on these channel both has a lawnmower running in the background... and even funnier, now my neighbor started moving their lawn too
Love me a straight six engine. Would love to see a Ford 300 c.i. straight 6 teardown. Talk about legendary, I'm pretty sure my 1993 F-150 will outlive all of us.
Ooph, this brought back memories - I tore down four 4M engines over a few years looking for a rebuild candidate, ended up junking them all because the heads and blocks had all been milled too far. In Aus by the time people appreciated the 7M for what it could do once properly maintained the JZ series was readily available and most M blocks went to the scrappers. Still, very smooth engine, my existing 4m in the MX22 is still going, oil leaks and all. My Alfa mechanic has a soft spot for them as he started as a floor manager for our local Toyota back in the 70s.
I remember those engine running like an abolute sewing machine in at the Toyota dealership I worked at back in the day. The non turbo versions rarely had any issues other than the oil galley plugs leaking and filling the spark plug tubes with oil, and ruining plug wires. I never saw a headgasket issue on the NA engines. On the turbo ones though? Yep. Saw a bunch.
Love your incredibly detailed engine breakdowns as always! Is there anyway you could do a 3mzfe breakdown/quality analysis in the future?? Would be a nice video adding on to the videos you have about repairing the 3mzfe!
You’d consider that a semi closed deck? I’d consider it a close deck. The coolant jacket space is all pretty modest and there’s just a ton of material around the cylinders.
You just crunched the multi layer steel headgasket that came stock in the 5m. The 7m changed to a graphite gasket and didn't change the torque spec to compensate. Only the 7m has headgasket issues
@@speedkar99 only because of the undertorqued head bolts the stock gasket is plenty fine once the bolts are torqued up properly. there's at least one guy on the supra forums that used arp studs + stock gasket with i think 6 or 12 psi boost, 30,000 miles/50,000 km no problem
@@speedkar99 with the advancements in timing technology, I wouldn't be surprised to see some smaller ones made for enthusiasts. Manufacturers have figured out that 4 cylinders are just plain cheaper to produce and can provide enough power for most people. I just miss the different engine notes I used to hear back in the day and would love to see a company innovate to make a smaller displacement one of these. Such a well balanced engine, love how smooth they are at idle.
Really enjoy your video's. Perfect editing in you keep things moving along. If you buy a used vehicle is there anything you recommend to possible get those oil ring holes on pistons open if in doubt as to oil changes or do you think just keep changing oil at 3000 mile intervals for 10k or so would the oil itself dilute the crud over time? Again most appreciative of your experience. Better spring for another tooth brush for brother or the Mrs. Thanks Bro.
Excellent vid! I had a question I’ve got an MX-73 Cressida with the 5m and it has a slight oil drip. Figured it might be a tired pan gasket. My question is do I have to do any drastic things for the fix, or is it as simple as a few bolts to drop it and replace? Thank you.
Speedkar:: you need to change the wording from "was" to "IS" legendary, besides that,.. love your vids!! keep it up!! BTW what "was legendary" is your brother tooth brush,...
@speedkar99 This is great! Yooo have you tore down a 1990-1993 sohc accord engine? Those cars were pretty popular/engines lasted long. Still see em on the road today.
Thee really weren't any head gasket issues until the 7M was introduced. Some say it was poorly materialled head gaskets, some say it was under torqued heads from the factory, and some say it was soft metal that the heads were made of...I pretty much believe it was all of the above. Never heard of issues with any other generation of M
@@speedkar99 ... and difficult to cool. I'm sure you can do a forged aluminium billet block that would compare in tensile strength with a better heat conductivity. It would be lighter and offer better cooling. But it would be more expensive to do.
"I'm just gonna use this quilt that my brother used to use back in the day... when he was single" too funny!!!!
Yea that quilt has seen better days
@@speedkar99 the best part is you say "ITS GOOD IN ABSORBING FLUIDS" only few can understand..... 😂😂😂😂😂😂😂
@@madhukeshnp Those gloves were not thick enough!
The 5MGE was used from 1982-86 Supra and the one you are showcasing here is from an 82 or 83 as it has the early style harmonic balancer with multiple V belts versus the 84-86 models which used a multi-ribbed serpentine. This also means it has the low compression (8.8:1 ) pistons. And yes @3 minutes it is a fuel filter, charcoal canister is separate unit located on passenger's side frame rail. No Supras were ever carbureted by the way, they were all EFI f rom 1979+. The 6MGE and early 5MGE share the same low compression piston but the 6MGE has a 9.2:1 ratio due to it's longer stroke. It's a common mod for 6M builds to use the later model 5MGE 9.2:1 pistons to effectively make the 6MGE around 9.8:1 or so. Great video, thanks for sharing!
Thanks for the input. I meant that earlier m-series of engines were carburated. I person I got it from said it was in an 86 but it must have originally came from an 83 or something.
Forgot about the 5me that was sold out side the states. It came carbed in the crown, cressida and supra. Those were available from 79-88 but at some point they ran an odd efi like system but it was still a carburetor fed engine.
@@ShaneAgain No, the 5ME was EFI as denoted by the E at the end of it's designation.
@@thesupragoddess8946 I stand corrected, it added e at then end, sorry. 5m is the engine I'm referring to.
@@ShaneAgain Yes and it was the 4ME And 5ME in the Supra in 1979-1981, hence the Supra never came carburated, but Crowns did, and Cressida, etc
“If this were a Volkswagen you’d probably need a torx to do this” 🤣🤣 we all felt that one
Haha I hate on Volkswagen all the time lol
Actually two sizes of Torx, an 11 millimeter, a Phillips, eight drill bits and three days just for a thermostat.
Oh yeah, an assortment of four letter words.
Don't forget E-Torx and 12-point.
Because Volkswagen are fast, stylish and fun. But in the end are unreliable, plastic, endless money pits in the end.
The video every jdm fan on here waited for 😄
Wrong supra but still cool
Yep 😃
@@SomeOne-mx2ro 2Jz bruUuhhHhh
Man , I've learned so much from your videos ! You sure know ur stuff regarding Engines . The teardown visually helps me comprehend it .
Glad you appreciate it
Wow what a great video, thank you. I had two Supra's from 1986-1987 and they both experienced head gasket issues, fortunately I had a great independant Toyota mechanic who was able to fix that for a sensible price. Both mine were the 3L variant that was sold in the UK. These engines were super smooth, and the Supra was about the most amazing car I have owned and I have owned a LOT of cars.
Awesome!! My brother enjoys his
My second car was a copper colored 82 Supra with leather interior and the digital dash. I loved that car so much I got a job at the local Toyota dealership and became the 5MGE specialist. I can't remember any failures other than a cracked head and a TSB about the cams and cam towers for the 82 and some 83 models which was oiling passages being too small. I could balance a nickel on edge and rev to redline without it falling over.
Toyota PERIOD
Back in high school (1989) one of my best friends had a 1983 Toyota Celica Supra with this engine. I remember that timing belt cover and that "DOHC" valve cover. That engine was butter smooth, and had plenty of power.
They sure are smooth because of the piston arrangements
I've never clicked so fast on a video before. My gosh I learn so much from you I love it!
Glad you learned something!!
I love my 5M-GE Supra, runs and drives smooth.
Sure does. My brother likes his 7mgte supra as well
my first car was an 84 supra and the previous owners had driven over 2k miles with a bad head gasket before i got it, smoked like hell but still ran like a champ
Nice. Did you ever redo the head?
@@speedkar99 Yeah, had everything machined and rebuilt the whole engine to keep everything running for decades to come
You want to be really careful with these wires and hoses, they get brittle over time... *snip* LOL
snip lmao
I was wondering how many people would notice that. I was gonna edit that part out
Lol, loved it! I do the same (on my stuff) as the connectors/harnesses need to be good after repair... best way to make new ones, cut the old ones off and put aside for wife to duplicate wiring harness ; )
But customer car... they don't want to pay for the time/cost, usually.
Epic to put in vidy, tells volumes.
That was about the funniest speedkarizm I've seen so far - I just about lost it lol
@@speedkar99 don’t edit it out…leave it as it is… lol
You provide tons of rt time info quickly and effectively. Well worth watching to plan a job and save time if you have not done the particular job before.. And great for those learning after basics. Keepem coming.
Thanks!!
Love your videos! Please consider doing some videos on marine engines!! It would be so helpful to the boating community!!
Would be good for me to learn how those work too
I'm so glad I found this! I'm going to be pulling my engine soon and completely redoing all seals and seeing how the bearings look.
How did it go?
The Cressida was a wonderful car. Everyone I know where I live had one back in the day. Amazing engine and handling
I'm still having a Toyota Crown with 5M motor, only it have a carburator instead of EFI system.. it's very powerful and very simple to maintain.
Nice! What year?
@@speedkar99 1982
Love the idle purring of the 5MGE. It was the the first and only engine I ever changed the timing belt DIY. It took me two days but it was a successful project. I still missed the 1985 Celia Supra P Type 5-speed 😞.
Nice! Sure are smooth because it's well balanced
The earlier Supra's were one of my all time favorite cars, if you see any now they are all going for a pretty penny.
Agreed. They built a good reputation
I love this tear down/ analysis of certain engines. Would you possibly do one of the Om606? It’s also a straight 6 from 90’s-00’s from Mercedes, but it’s diesel wanted to compare and contrast the two engines, but most people don’t even know if the Om606. :) greatly appreciated if you can, but if not still loved this video, thank you!
I haven't heard of that either
In japan they use a screw called JIS which is what those cam cover screws could be, JIS looks very similar to Philips screws on the face but geometry is very different. JIS is also the reason why a lot of people have problems with stripping disk retention screws on Toyota's as they are using Philips and not a JIS.
Interesting, I didn't know that
The oil pressure regulation for the block is actually done right there on the pump! The 22mm hex bolt with the hole in it contains the initial pressure relief valve. The one on the head is closer to an Oil Control Valve to prevent flooding the cam towers and hydraulic lash adjusters.
Awesome! Yeah most are done right on the pump
Hey mate. I just wanted to say that you are the best mechanic on UA-cam I've ever seen. Thank you so much for your effort, you are legend 👍 also I want to send you a box of tooth brushes and a bag of undies to say thank you 😁 but my local post office here in Melbourne - Australia is closed today 🥴 THANKS AGAIN MATE 👌
Welcome. I'm not a mechanic though, I'm an engineer.
@@speedkar99 even better 👌
@@speedkar99 That explains a lot [of good things].
@@speedkar99 Thanks sharing. Since you are an engineer. With your experience who are your top 3 engine manufactures modern day.
Your wife is helpful 😍...... long live you both..... wiring harness joke was just epic snip snip 😂😂
Haha I was gonna edit that put but I said meh let me leave it and see if anyone notices
@@speedkar99 i had noticed a apple on the floor a few videos back then... how can we not notice someone brushing the engine cases 😅...
Very educational, funnily enough, the only two videos I have seen on these channel both has a lawnmower running in the background... and even funnier, now my neighbor started moving their lawn too
Love me a straight six engine. Would love to see a Ford 300 c.i. straight 6 teardown. Talk about legendary, I'm pretty sure my 1993 F-150 will outlive all of us.
Nice!
no timming chain to strech or belt gear to gear head will crack in the middle is run hot enough
I have a Supra mk2 this will help me work on it thank you for this video!!!
Welcome
very beautiful and deep illustration
Ooph, this brought back memories - I tore down four 4M engines over a few years looking for a rebuild candidate, ended up junking them all because the heads and blocks had all been milled too far. In Aus by the time people appreciated the 7M for what it could do once properly maintained the JZ series was readily available and most M blocks went to the scrappers. Still, very smooth engine, my existing 4m in the MX22 is still going, oil leaks and all. My Alfa mechanic has a soft spot for them as he started as a floor manager for our local Toyota back in the 70s.
Bro, you sure know every little part of the engine like the back of your hand. Impressive
Very underrated channel.
You should have a scale, to weight the parts from older Cars, and compare to newer ones. Great channel! Saludos desde Argentina!!
Yep the scale would tell you alot of about the differences in weight
I love your videos, thank you for making them.
Great video man! Cheers!
Welcome
I remember those engine running like an abolute sewing machine in at the Toyota dealership I worked at back in the day. The non turbo versions rarely had any issues other than the oil galley plugs leaking and filling the spark plug tubes with oil, and ruining plug wires. I never saw a headgasket issue on the NA engines. On the turbo ones though? Yep. Saw a bunch.
Interesting. I thought they had a bulletin for retorquing them head bolts
@@speedkar99 the turbo ones iirc. Never saw an issue on the na ones.
Excellent explanation 👍
Greetings from Iraq
Hi from Canada
Love your incredibly detailed engine breakdowns as always! Is there anyway you could do a 3mzfe breakdown/quality analysis in the future?? Would be a nice video adding on to the videos you have about repairing the 3mzfe!
Fantastic video
Thanks again
4:45 The engine's face when it realizes it's about to become a coffee table
Haha
Crankshaft lamps? Connecting rod book ends? Thanks for these awesome videos 👍
Welcome
That head designs reminds me a lot of the late 90s, early 2000’s GM 2.4l
With the separate cam holders?
@@speedkar99 Quad 4 2.4 is what it was called. Yes it has two separate cam holders. Maybe GM pulled a copy cat on Toyota
You’d consider that a semi closed deck? I’d consider it a close deck. The coolant jacket space is all pretty modest and there’s just a ton of material around the cylinders.
If anyone deserves a shop it's you. Good show and tell 👏
Thank you for the videos very entertaining and educational Hilarious ending too 😂
The role of the washers is also to not strip/scratch the head when tightening :)
Old school engine was the best 👌 👍
Those giant camshaft housings kinda remind me of the gm quad-4.
Never tore into a GM but that would be interesting
@@speedkar99 Do a 3800! Maybe a supercharged one if you can find one
Love from the Netherlands !
Hi from Canada
If you look closely at the crankshafts you might notice that the 6M has a longer stroke ( 91mm vs 85mm)
Yeah I think that was the only difference. Kinda hard to tell visually though
My old 22RE Toyota engine had that same style head gasket. It failed but now it has a new multilayer steel gasket and it’s good to go for another 300k
You just crunched the multi layer steel headgasket that came stock in the 5m. The 7m changed to a graphite gasket and didn't change the torque spec to compensate. Only the 7m has headgasket issues
5m didn't come stock with MLS it also had headgasket problems like the 7m did
Love my 5m in my Cressida but it does go through gas. Also mine is automatic but I feel a manual would be much more fun because it does live to rev.
metal head gasket isn't necessary if you're NA or pushing boost just a small amount above stock, the oem graphite gasket is plenty good
Didn't they use to blow all the time?
@@speedkar99 only because of the undertorqued head bolts
the stock gasket is plenty fine once the bolts are torqued up properly. there's at least one guy on the supra forums that used arp studs + stock gasket with i think 6 or 12 psi boost, 30,000 miles/50,000 km no problem
I would love a smaller displacement straight 6 just like this, maybe around the 2.2 liter version with a turbo. They sound great.
The old BMWs used to have small inline6 but they stopped making them
@@speedkar99 with the advancements in timing technology, I wouldn't be surprised to see some smaller ones made for enthusiasts. Manufacturers have figured out that 4 cylinders are just plain cheaper to produce and can provide enough power for most people.
I just miss the different engine notes I used to hear back in the day and would love to see a company innovate to make a smaller displacement one of these. Such a well balanced engine, love how smooth they are at idle.
@@speedkar99 You should take apart an old BMW engine, M20, M30 or M50, that'd be very interesting
If you can do a video on how to upgrade a 5mge that would be awesome!!!
wipes of glases* IS THAT A SUPRA!!!🔥🔥🔥
Yes it is
Miata engine teardown or mechanic review next!!
Send me one
Yea..EFI was a huge marketing item back in the 80's.
Sure was. And DOHC and VTEC VVT was a bigger thing in the 90s
The 7M were bad for head gasket issues. The head bolts were under torqued from the factory. The 5M GE did not suffer from this issue.
Yes
My brother is rebuilding is now
Great engine. I have one in my 84 Cressida wagon. Still runs like new.@@speedkar99
Great videos, any plans to do a tear down of a Genesis Tau GDi 5.0 engine?
Really enjoy your video's. Perfect editing in you keep things moving along. If you buy a used vehicle is there anything you recommend to possible get those oil ring holes on pistons open if in doubt as to oil changes or do you think just keep changing oil at 3000 mile intervals for 10k or so would the oil itself dilute the crud over time? Again most appreciative of your experience. Better spring for another tooth brush for brother or the Mrs. Thanks Bro.
Great Video. They don’t make this no more.
They don't make them like they used to
Excellent vid! I had a question I’ve got an MX-73 Cressida with the 5m and it has a slight oil drip. Figured it might be a tired pan gasket. My question is do I have to do any drastic things for the fix, or is it as simple as a few bolts to drop it and replace? Thank you.
thanks for video.
Do you have the teardown of the new supra engine out of a BMW? people say good things about the new engine.
B58? It'll be a while before I find those in the scrap bin
@@speedkar99 we will wait. TNX Bro.
Speedkar:: you need to change the wording from "was" to "IS" legendary, besides that,.. love your vids!! keep it up!! BTW what "was legendary" is your brother tooth brush,...
The toothbrush comes and goes. The engine on the other hand stays for a long time
Love from Kenya!
Hi from Canada
Is it reliable camry engine or better then that?
Probably more sturdy. The difference is once you tune it. Can't tune a Camry motor too much since it's aluminum
"You have to be very careful disconnecting wire harnesses" SNIP!
When I vacation to the Toronto area maybe I can stop by and visit you?
Maybe
03:48 Busted!
They coming for the wife's toothbrush
@@speedkar99 🤣
@speedkar99 This is great! Yooo have you tore down a 1990-1993 sohc accord engine? Those cars were pretty popular/engines lasted long. Still see em on the road today.
Thee really weren't any head gasket issues until the 7M was introduced. Some say it was poorly materialled head gaskets, some say it was under torqued heads from the factory, and some say it was soft metal that the heads were made of...I pretty much believe it was all of the above. Never heard of issues with any other generation of M
Oh Wow! Not a computer in sight! Awesome!
I had a 1986 1/2 Supra and I blew the head gasket. I bounced it off rev limiter until it vapor locked.
It started and drove the next day..
Wow
would you ever do a teardown on the vvti 1uz? preferably a high mileage one?
Good video brother, guys, do you recommend the cressida 85 with a 5mge engine as my first car?
Good to know that you have new coffee table. 😀
Hi my friend
What's the difference with ge, 1jz, 2jz....
JZ was a way different head design and had vvt
Heeey that's what I got! That Engine is Bitchin in Mine and pulls really hard from 0 to 50! Really Impressive!
I thought the 6M is just a variant of the 7M-GTE, the difference being wether the crank was fully counterweighted or not.
Ah yes; the much sought-after Supra engine, in all its 2.8L naturally aspirated glory
Yep, though I'd say the 7M would be the one saught over
Bro you need your own shop !!!
Yeah, sadly I can't afford that right now. Just my driveway will have to suffice. Especially during winter
Interesting person,good sense of humor,well made,interesting video!
Glad you appreciate it
Do you ever rebuild and use these motors?
Nope. Scrap
@speedkar99 bruh
Great idea for the tables, but With that kind of power, won't you spill your coffee? 😁
Have u ever done a RB engine teardown?
No. Too expensive to buy for scrap
What is this person is doing with these engines, selling parts, rebuilding them, or just having fun tears them apart?
Just having fun and learning
One word. Turbo iron block.
Yeah, the recipe for a robust engine is to have a cast iron block with preferably entirely closed deck design.
Yep. Sure is robust. And heavy
@@speedkar99 ... and difficult to cool.
I'm sure you can do a forged aluminium billet block that would compare in tensile strength with a better heat conductivity. It would be lighter and offer better cooling. But it would be more expensive to do.
My camry has a 1mzfe, literally a different shaped 6 cylinder its 3.0 liters as well 😭
The 1MZ is a way different beast. Check out my teardown video I fid on that on my channel
Did you do a video on the 2JZ already?
Nope
“My brothers quilt………..back from when he was single.” Lol
It would actually be great if metal parts were used more in the modern day
The difference between the two engines is 6m carries a longer stroke on the crankshaft..
Yes. Hence the 3.0 displacement instead of 2.8
Do you rebuild these engines eventually?
Nah. Tables
@@speedkar99 nice
6:16 Eh, that extension. Dunno why I thought you were in the US. No wonder the police sirens sound so familiar.
I'm still hoping you'll get your hands on a 22r
Would be good
Heavy duty it is
Literally heavy.
Next do the 'legendery' Chrysler slant six - if you can find one.
Those are probably all gone by now
Thin rings doesnt mean the manufacturer cut costs. thinner rings reduce friction and if engineered properly can even outlast a thicker ring.