Thanks for the videos, I was a Yuneec owner but just bought a Phantom 3 advanced. Your instruction videos have helped. I am just about to take my first flight. Subbed and thumbs from me
This video was rather informative. I learned a lot and that was mostly due to your steady and intelligible speech. I don't have the same Remote Controller as you do. I mean, the three slide switches and the USB interface. However, I do manage with the SD card and the USB port on the gimbal apparatus. Thank you. My advice for all owners of this drone is to be patient and keep trying. The more you do, the more you learn. Thank you.
The BEST tutorial I have seen for any craft! Excellent presentation. Thank you very much for taking the time. I am about to purchase a 3 advance. I assume everything you have shown us here, would be the same. Thanks again. I will watch the second part and look for more of what you have on the phantom 3. Oh, you should check/disregard your e-mail once in awhile. :-)
Nice vid! Just got mine this week and I love it! I'm still using beginner mode and keeping it under 100ft until I'm more comfortable with the control sensitivity.
Thank you so much, I've watched a lot of Video on the Phantom 3 because mine will be coming tomorrow, and this is the best out there that I've seen, Everything is plain and you have a very good speaking voice, With all the talk about Wifi I take for granted everything will operate on 4g (might be a crazy question but I'm new to all this, Again Thank you.
good video saved it for later when i get my phantom . I have watched over 50-100 videos already because i am really wanting to learn all i can about the phantom before i fly it. its a huge investment and why wouldn't you. i want to integrate all the steps from 1 to ??? onto a paper check list and keep it in the bag with the phantom. so when i go flying, i have it all on paper. i will start my list with your video 1st :)
Thanks for the informative and easy to understand video!!! Really really needed this ! Got mine yesterday (4/27/19), and after reading/listening to dozens of updating firmware videos, want to be sure about all this ! Saw a comment yesterday ,dated a month ago, that now the card transfer back and forth from RC to Aircraft etc is not necessary as the computer modem will automatically send out the updates to install, the same as in any iPad....is this true? Any response will be appreciated !! Thanks!!!!! :)))))
thanks dude! finally a video that shows me step by step what to do! I will have many questions for you! subscribed. should u buy that 30 dollar app? it sends to feature follow me mode and way points. can the default GO app do that?
Any idea why the z-axis acceleration always calibrates to -1.0g ? When I ran this on my PH3P, I thought something went wrong with the IMU calibration, with the calibration complete text being red, but then I noticed yours is exactly the same, red complete text, all x, y and z axis calibrations to 0.0g with exception of the z-axis acceleration, which was also -1.0g.
Hey brother, very informative video. At around 5:23min into video, I noticed that the "radio channel quality" kept flashing from good to poor. Mine does that too, is that anything to be concerned about? Mine is brand new and like you, I'm right next to the quad. Why is the radio quality poor? I've been worried about this for a couple of days now, haven't really flown it yet. Just some hovering around the backyard. I plan on taking her out tomorrow. Thanks for any help in advance. DJ SOUL FORCE
usually being too close causes signal to be bad due to too strong rf overwhelming the receiver. if you move a little further away you will likely get full signal.
The app continues to hit me with a RC error message. The RC is connected but the error continues. I have configured it and calibrated everything but the controls remain unresponsive and the error message remains. I've been trying all day. It's the standard Phantom 3 and I don't have the controller you have in this video, but instead the one that came with the standard bundle. Any ideas on how to fix this?
If you successfully registered your Phantom 3 Standard to the DJI website using the DJI Go App, that should unlock the drones' internal operating or Firmware settings. It's like buying a video game on a CD but you have to register it to unlock the codes to work. Also, make sure your phone or tablet is compatible. My LG Stylo phone will NOT work with the Phantom 3 Standard at all. However, it did work with my Samsung Tab A and the older crappy Motorola Moto G. It is better if you have an Iphone or Ipad since they were made with that in mind.
I have the same problem, FN Pissed me off! I have to order an adapter. Check this out, I think its what we need... www.startech.com/Cables/USB-2.0/USB-Adapters/5in-Micro-USB-to-USB-OTG-Host-Adapter-Male-to-Female~UUSBOTG
Not trying to be funny but other than the goverment taxing everything what if you dont register this, i mean will the police come and find you and say hey heard ya got a drone show me your certificate
Thanks for the videos, I was a Yuneec owner but just bought a Phantom 3 advanced. Your instruction videos have helped. I am just about to take my first flight. Subbed and thumbs from me
This video was rather informative. I learned a lot and that was mostly due to your steady and intelligible speech. I don't have the same Remote Controller as you do. I mean, the three slide switches and the USB interface. However, I do manage with the SD card and the USB port on the gimbal apparatus. Thank you. My advice for all owners of this drone is to be patient and keep trying. The more you do, the more you learn. Thank you.
The BEST tutorial I have seen for any craft! Excellent presentation. Thank you very much for taking the time. I am about to purchase a 3 advance. I assume everything you have shown us here, would be the same.
Thanks again. I will watch the second part and look for more of what you have on the phantom 3.
Oh, you should check/disregard your e-mail once in awhile. :-)
Nice vid! Just got mine this week and I love it! I'm still using beginner mode and keeping it under 100ft until I'm more comfortable with the control sensitivity.
Thank you so much, I've watched a lot of Video on the Phantom 3 because mine will be coming tomorrow, and this is the best out there that I've seen, Everything is plain and you have a very good speaking voice, With all the talk about Wifi I take for granted everything will operate on 4g (might be a crazy question but I'm new to all this, Again Thank you.
Excellent 2 part guide thanks! Very good voice to listen to as well :) Good job
good video saved it for later when i get my phantom .
I have watched over 50-100 videos already because i am really wanting to learn all i can about the phantom before i fly it. its a huge investment and why wouldn't you.
i want to integrate all the steps from 1 to ??? onto a paper check list and keep it in the bag with the phantom. so when i go flying, i have it all on paper.
i will start my list with your video 1st :)
This was ideal it got me to my first flight.....give thanks
Thanks, this helped a lot! up in the air now! Cheers from Norway.
that drone looks awesome
Awesome man thank you for this.
Thanks for the informative and easy to understand video!!! Really really needed this ! Got mine yesterday (4/27/19), and after reading/listening to dozens of updating firmware videos, want to be sure about all this ! Saw a comment yesterday ,dated a month ago, that now the card transfer back and forth from RC to Aircraft etc is not necessary as the computer modem will automatically send out the updates to install, the same as in any iPad....is this true? Any response will be appreciated !! Thanks!!!!! :)))))
Nice video and very informative. I watched Part 1&2, what is the size of the iPad that you're using on the remote?
thanks dude! finally a video that shows me step by step what to do! I will have many questions for you! subscribed.
should u buy that 30 dollar app? it sends to feature follow me mode and way points. can the default GO app do that?
Great vid, thanks!
Any idea why the z-axis acceleration always calibrates to -1.0g ? When I ran this on my PH3P, I thought something went wrong with the IMU calibration, with the calibration complete text being red, but then I noticed yours is exactly the same, red complete text, all x, y and z axis calibrations to 0.0g with exception of the z-axis acceleration, which was also -1.0g.
Hey brother, very informative video. At around 5:23min into video, I noticed that the "radio channel quality" kept flashing from good to poor. Mine does that too, is that anything to be concerned about? Mine is brand new and like you, I'm right next to the quad. Why is the radio quality poor? I've been worried about this for a couple of days now, haven't really flown it yet. Just some hovering around the backyard. I plan on taking her out tomorrow. Thanks for any help in advance. DJ SOUL FORCE
+DJ SOUL FORCE I would like to know as well. Just bought a Phantom 3 advanced! :D
+RocketLR I wanna know too
usually being too close causes signal to be bad due to too strong rf overwhelming the receiver. if you move a little further away you will likely get full signal.
front right there is a pin missing i think on the gimble
is it possible to get the coordinates of its location through the map?
what is that red light on your coat?
I noticed you avoided the very important " update your firmware" notification that the app was giving you...any reason ?
+Gary Boyle - Tacomaboy I only avoided it because I was not flying anytime soon and needed to get this video out I can do the updates on my own time.
+R/C Addict Makuloco Thanx
Why there is no link button in the aircraft
The app continues to hit me with a RC error message. The RC is connected but the error continues. I have configured it and calibrated everything but the controls remain unresponsive and the error message remains. I've been trying all day. It's the standard Phantom 3 and I don't have the controller you have in this video, but instead the one that came with the standard bundle. Any ideas on how to fix this?
If you successfully registered your Phantom 3 Standard to the DJI website using the DJI Go App, that should unlock the drones' internal operating or Firmware settings. It's like buying a video game on a CD but you have to register it to unlock the codes to work. Also, make sure your phone or tablet is compatible. My LG Stylo phone will NOT work with the Phantom 3 Standard at all. However, it did work with my Samsung Tab A and the older crappy Motorola Moto G. It is better if you have an Iphone or Ipad since they were made with that in mind.
I got the p3 pro. and my controller came with a micro usb port only, how is that possible? and i got a usb- micro usb cable. HELP!!
I have the same problem, FN Pissed me off! I have to order an adapter. Check this out, I think its what we need... www.startech.com/Cables/USB-2.0/USB-Adapters/5in-Micro-USB-to-USB-OTG-Host-Adapter-Male-to-Female~UUSBOTG
i heard u gotta pay 2p dollars to register this thing now
+YoungBlaze Of Chitown $5 only I just registered mine-www.faa.gov/uas/registration/
Not trying to be funny but other than the goverment taxing everything what if you dont register this, i mean will the police come and find you and say hey heard ya got a drone show me your certificate
+YoungBlaze Of Chitown I know right.
+Emily Dorsett please tell me where u seen or heard that piece of information
***** i coulda swore that Dji phantoms were at the Top of the list
There is no USB output