Agreed. Straight into the practical stuff. "To learn the basics we'll make this. Do this, do this, do this, do this..... done. You now know how to do all that stuff". Wow! Thanks.
One great thing about his tutorial is that he teaches you different methods to do the same procedures. As long as you're paying close attention you can learn a lot. I hope to get proficient in SW and refresh my knowledge in Catia also.
Today I am applying for the position of cad tech in our company. Where the needed software to be used is solidworks, But, in my previous company which is molding injection we used Nx / Unigraphics for modelling. Sometimes we draw in Cad, then extract to NX. I will subscribe your channel. To know better in solidworks. Please pray for the my interview. I will learn in this video a lot thing. Thank you
Great tutorial! if you just opened the software for the first time (like me) watch another video that talks about the very basics (tool layout, navigating the 3d window, etc) made this video way easier to follow.
@2:57 It's important to note that the "thin feature" option does not appear if you create the feature as a solid, but then try to edit the feature and make it a "thin feature".
Avez-vous fait les mêmes étapes et les avez-vous appliquées à Slideworks? Pourriez-vous me l'envoyer par e-mail s'il vous plaît car j'en ai vraiment besoin
In my channel I am providing videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. you can also join our telegram group for any queries .Please visit my channel . Thank you.....
This is a good one. I took inspiration from you and started my own cad tutorial UA-cam channel @cad by nana. Your level of detail is impressive. Thanks Sir!
I use inventor autodesk and for the holes I use points and set the dimensions. I’ve never used solidwork but I find it a bit similar to inventor, you are doing a good job keep it up.
I'm subbing!, thank you so much, i only know how to use inventor, and so I'm trying to get a draughting job but they want solid works. I'm praying I get as good as you.😍
Thank you very much. thanks to the tutorial provided, I got a lot of experience. thanks to this video tutorial I can also upload solidworks video tutorials.
First time SW user here. Did everything according to instructions. Couldn't get the circle to sweep. Restarted software. Success. Lesson:3% of the time your are not the fault.
After drawing the rectangular section and 4 holes...you can make reference plane in between and then mirror the rectangular section and holes to save time
Wow coming from Catia now learning solidworks. This is seems way more intuitive. Trying to do half the things he just did would make catia lose its mind. I think I will like this software! Also its very similar to geomagic design x which I also have lots of experience with! 🤘🏻
Yeah he did this a lot quicker than I did. I had issues with the sweep of the circular profile because I made the path a construction line. Not sure why solidworks doesn’t like that.
Awesome tutorial! I've only been using solid works for 5 weeks. I have basic computer skills but using solidworks I feel like a master already. Question about the video, shouldn't the recessed holes on the square pieces be on the other side? I'm assuming the bolt head are used here. Maybe a gasket on that face? Someone educate me please. Thank you
HI you forgot to add the c10 chamfer to the inside of the flange opening and also the radius applied to the rear of the flange face to the pipe (r10) love the tutorials though, its nice to practice with these to keep up skills
hi, I'm new to solid works. I couln't figure out how after drawing the first line, your cursor was creating an arc because as you said to move the cursor a bit further and go back to the point and it will automatically start making a circle @1:22 but mine was not. what might be the issue?
Very good - method of taking us through each is good. It will be good if you also create the 2D dwg from this. - as in the 2D dwg was not able to create the center line of the elbow
In my channel I am providing videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. you can also join our telegram group for any queries .Please visit my channel . Thank you.....
If the narrator has an Indian accent, you know this is gonna be a good tutorial
he's also using a $10 pair of headphones, probably with only one ear. He knows what he's doing.
Lol, Yeaaaaaah man they are the best
Indeed brother
This is Indian accent u dumbass..
Agreed.
Straight into the practical stuff.
"To learn the basics we'll make this. Do this, do this, do this, do this..... done. You now know how to do all that stuff".
Wow! Thanks.
One great thing about his tutorial is that he teaches you different methods to do the same procedures. As long as you're paying close attention you can learn a lot. I hope to get proficient in SW and refresh my knowledge in Catia also.
Great tutorial, lots of info and no horrible music over it. Thanks!
I am a beginner and this was very helpful.Thanks mate! Keep the good work.
Today I am applying for the position of cad tech in our company. Where the needed software to be used is solidworks, But, in my previous company which is molding injection we used Nx / Unigraphics for modelling. Sometimes we draw in Cad, then extract to NX.
I will subscribe your channel. To know better in solidworks. Please pray for the my interview.
I will learn in this video a lot thing. Thank you
Great tutorial! if you just opened the software for the first time (like me) watch another video that talks about the very basics (tool layout, navigating the 3d window, etc) made this video way easier to follow.
YOU ARE ONE OF THE BEST INSTRUCTOR ON UA-cam
All I have to say is thank you for such a straightforward tutorial.
@2:57
It's important to note that the "thin feature" option does not appear if you create the feature as a solid, but then try to edit the feature and make it a "thin feature".
Im just trying to learn solid works for school :) and this video was good at explaining and well made thank you :)
Avez-vous fait les mêmes étapes et les avez-vous appliquées à Slideworks? Pourriez-vous me l'envoyer par e-mail s'il vous plaît car j'en ai vraiment besoin
In my channel I am providing videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. you can also join our telegram group for any queries .Please visit my channel . Thank you.....
@@solidmaster7923channel name
@@Introvert0781 solid master
Wow Keren
This is a good one. I took inspiration from you and started my own cad tutorial UA-cam channel @cad by nana. Your level of detail is impressive. Thanks Sir!
Thank you for taking the time to teach, your videos are excellent!!
Man is better than my professor and it only took almost 12 mins for me to understand.
Thanks for your videos and your pace of explanation. I've found your channel to be an invaluable resource! Keep up the great work!
I use inventor autodesk and for the holes I use points and set the dimensions. I’ve never used solidwork but I find it a bit similar to inventor, you are doing a good job keep it up.
At 6:55 It is better to use hole wizard if you have a supported version for that feature.
And then you realize he even put the bolt holes facing the wrong direction... how are you going to attach that thing to anything? xD
@@PaoloCostaBaldi lool I just noticed it hahaha
hi
Thanks man, god bless you. I got it for new design
I'm subbing!, thank you so much, i only know how to use inventor, and so I'm trying to get a draughting job but they want solid works. I'm praying I get as good as you.😍
Thank you very much. thanks to the tutorial provided, I got a lot of experience. thanks to this video tutorial I can also upload solidworks video tutorials.
Awesome!! My first part! Many thanks!
Thanks for all Solidworks videos! :)
Straight to the point.... All drafting no rambling ! Thanks
thank you, i made my first pipe with you ! Waouw wonderfull pipe !
I'm Very pleased such kind of tutorials !
First time SW user here. Did everything according to instructions. Couldn't get the circle to sweep. Restarted software. Success. Lesson:3% of the time your are not the fault.
Keep it up sir we support u all time I learn solid work form u really mashallah ❤️💕
Could seriously use this software for engineering, that’s great!
After drawing the rectangular section and 4 holes...you can make reference plane in between and then mirror the rectangular section and holes to save time
Great explanation. I am from Sri lanka
I'll definitely be watching more videos
Wow coming from Catia now learning solidworks. This is seems way more intuitive. Trying to do half the things he just did would make catia lose its mind. I think I will like this software! Also its very similar to geomagic design x which I also have lots of experience with! 🤘🏻
I follow you sir and learn BASIC and Advance knowledge
Thanq soo much sir .. your teaching style is awesome .. any one can understand it 🤘🏻
Master of the game,well done 👍
Good Solidworks tutorial for beginner.. good job thanks
excellent video, helped me learn some new skills and I will happily subscribe!!!
Nice explanation..... Thank you for sharing....
The best instructional video ever
Thanks one more time! It's easy but very nice to make.
good tutorial, you forgot the 10mm fillet on connecting the flanges to the pipe though! XD
Very nice tutorial. Thank you for that!
nice brother.good like me as a beginner.more uploads sir
😊
Very useful tutorial. Good Work
Thanks a lot!!! This is start for me!
You are the best!!
Very helpful for a beginner as me! Thanks
Helped me a lot, Its perfect and Accurate , loved it,
Great job and please do more för bigginer
New but learned a lot 🎉
Thank you for every day!!
Yeah he did this a lot quicker than I did. I had issues with the sweep of the circular profile because I made the path a construction line. Not sure why solidworks doesn’t like that.
Thanks man. Helpful.
I love it , thanks and keep doing more
Although this tutorial is very straightforward, but my brain easily got it !
Very helpful and knowledgeable material.......thanks a lot sir.
Great video,, congratulations
Awesome tutorial! I've only been using solid works for 5 weeks. I have basic computer skills but using solidworks I feel like a master already. Question about the video, shouldn't the recessed holes on the square pieces be on the other side? I'm assuming the bolt head are used here. Maybe a gasket on that face? Someone educate me please. Thank you
This video made cad seem very intuitive
Holy shit idk I even watched this before. Update for no one. I'm now a 1st year mechanical engineering student and am doing this tutorial
Very helpful. Thank you
nice video, i learnt few tips, however you forgot the R10 edges
I would make all the features on one end, create a 45° plane of reference, then mirror it all to the other end if the entire part is symmetrical.
It turns out you can do this even in FreeCAD. Thanks for the great idea!
Perfect tutorials, thank you!
Perfect tutorial to learn. Thank you sir
Nice and detailed explanation...😍
GOOD JOB BROTHER 😊
HI you forgot to add the c10 chamfer to the inside of the flange opening and also the radius applied to the rear of the flange face to the pipe (r10) love the tutorials though, its nice to practice with these to keep up skills
thanku for giving us a design in different method
Thank you.great work .I learned many things
Thanks I try to help! If you loved this tutorial like!
Thanks for Tutorial Inspiring boss...
Good like..👍👍
Bro you forgot to add R10 near flange. Loved your Tutorial
Nice PROJECTS for BEGINNERS sir
Bhaiii awesome tutorial thank you very much. Need more
great job, keep sharing mate!
Good job buddy.....I like all your videos
Good work!
tank you very much for show us how to make this part..
hi, I'm new to solid works. I couln't figure out how after drawing the first line, your cursor was creating an arc because as you said to move the cursor a bit further and go back to the point and it will automatically start making a circle @1:22 but mine was not. what might be the issue?
Thank you so much 😄
I am learning. So wanna to see more video
YOU ARE GENIEUS
Thank you 👍🏼
Super i learn many things
Great 🔥♥️
really help me introducing myself to solidwork
Don't forget to add a 10mm fillet that meets between the pipe and flange!
អគុណបង
thanks alot 👍
for create 4 Socket Holes ,fast way :Hole Wizard...very good
Awesome. Thank you.
Hello sir, Please make some tutorial in drafting.....i think drafting is very helpful.....!!
Thank you very much .
Really appreciate.
So beautiful and profesional.....
Great, thank you!
Thanks for video
You forgot to do fillet on the back side of both flanges (10mm radius in drawings), besides that it was excellent exercise!
Very good - method of taking us through each is good. It will be good if you also create the 2D dwg from this. - as in the 2D dwg was not able to create the center line of the elbow
In my channel I am providing videos like solidworks, Ansys , autocad, creo, fusion 360 . In my channel you will get complete knowledge about designing software from basic to advanced level. I am also providing practice questions and dimension in pdf format. you can also join our telegram group for any queries .Please visit my channel . Thank you.....
That's a very kind lecture. Thank you.
Thanks❤🙏🙏
Thank you.