it is always a pleasure to watch your videos and learn so much with each video....no words can be enough to thank you for the time and effort you put into this...i wonder if you would also consider uploading some drawings that we who follow you could use to practice these exercises....it would definitely be appreciated from a learning point of view ! Thank you once again for these wonderful videos :)
It appears that the rib dimensions are not fully defined by the drawing. Your choice to place the 42mm radius of the fillet as the dimension length of the line in the rib drawing seems arbitrary.
Hi, Great tutorials! Quick question. So,at 10:23, the 42 mm dimension is used based on the radius. But the vertical line is 1 mm inside the cylindrical portion. Shouldn't I be taking 43 mm instead? Or is that irrelevant ? Thanks
@@herrtuug If you put the line collinear to the curve, Solidworks doesn't recognize that line, and a rebuild error msg pops up...Try it you will understand.
10:20 ,wrong!!!!, you cant take the length 42 mm,its nowhere given,42 is the radius of the arc only. to draw the rib you should draw the 42 mm arc first ( from fig : we can understand that the origin of arc is 42 mm(radius) down ,that will be at the bottom left edge of the cylinder ) then tangent the slanted line and then extrude the rib ,then fillet the 12 mm curve.
Absolutely fantastic, except that's extremely difficult if not impossible to machine as it stands. I've been toolmaking for 38 years so I know what I'm talking about.
Sir. I am always getting confused while drawing any sketch like lines, circles etc on any face or point of already sktched part. While I sketch a line on a surface , it comes in another plane. Pl guide.
In solid works 2022 version, during rib operation, it is asking to select body to extrude the sketch....It is showing as this "The resulting rib does not intersect the existing model."
On your keyboard use the keys"PS" (meaning "Print Screen") then past into MS paint and save as whatever file format you like the best and there you have it.
10:20 ,wrong!!!!, you cant take the length 42 mm,its nowhere given,42 is the radius of the arc only. to draw the rib you should draw the 42 mm arc first ( from fig : we can understand that the origin of arc is 42 mm(radius) down ,that will be at the bottom left edge of the cylinder ) then tangent the slanted line and then extrude the rib ,then fillet the 12 mm curve
Hey, can you just tell me how to add shining in materials? I make the model you drawn here in a similar way but in this video, your model is shining and mine not. Why?
Hello. Sir I m learning solidwork, but having difficulty to make 3d object by using multiple views when u dont have isometric view. I m not able to imagine that how that part will actually look like by combining multiple views. Help me.
When I did this part when I was doing the cylinder portion of it I did a reference plane 120 mm upwards off of the bottom face and then did a construction line that was lined with the center of the part that was dimensioned to 125mm. That way your not doing the math when you extrude it
Tomasz Brzozowski hello buddy, you just need to click on the line, then on left hand side a menu comes, select construct geometry, your line will become that. Hope this will help. Or just click on the line by pressing the right button of mouse then select the construction line option.
Younes IHAD he is not talking about the thickness of the rib. he is referring to the 1 mm dimension used at the right plane for the cross-sectional of the rib. I tried drawing without the 1 mm but the software could not create the rib without the 1 mm dimension.
Bro I have a problem during the Installation of solidworks. In the Toolbox / Hole wizard option the Toolbox installation location was displayed as not found....Plz help me to resolve 🙏
This is an easy to follow, high quality tutorial channel, very glad to learn from you!
it is always a pleasure to watch your videos and learn so much with each video....no words can be enough to thank you for the time and effort you put into this...i wonder if you would also consider uploading some drawings that we who follow you could use to practice these exercises....it would definitely be appreciated from a learning point of view ! Thank you once again for these wonderful videos :)
Thank you so much for your drawings. Always a pleasure to watch your videos and learn so much.
I enjoy watching your videos on morning coffee
It appears that the rib dimensions are not fully defined by the drawing. Your choice to place the 42mm radius of the fillet as the dimension length of the line in the rib drawing seems arbitrary.
I`ve learn a lot on this channel
The tutorials are commendable! Thanks to you guys.
Hello I´m from Mexico and I like your videos teacher. Greetings
You make it look so easy. Thank you sir!
Super exercise
Wonderful video
Well teaching bro from Bamgladesh
Thank you so much sir for these wonderful videos. And I like your voice sir😅
Thank you very much really good videos best I have seen so far
It helps me a lot, thanks a lot sir
Another very good tutorial!
it's hard to find out your accent. but you are good at teaching. thank u.
Indian accent
THANK YOU SO MUCH TEACHER!!
Hi,
Great tutorials!
Quick question. So,at 10:23, the 42 mm dimension is used based on the radius.
But the vertical line is 1 mm inside the cylindrical portion. Shouldn't I be taking
43 mm instead? Or is that irrelevant ?
Thanks
I too wonder why he even placed it 1 mm into the cylinder instead of making the construction line colinear to the outline of the cylinder.
@@yony120 It should be colinear. The way he did it will result in a wrong dimension when making a drawing for machining
@@herrtuug If you put the line collinear to the curve, Solidworks doesn't recognize that line, and a rebuild error msg pops up...Try it you will understand.
i also was thinking same that if 1mm is inside the circle than it should be 43mm.
1mm can create alot issue in mechanical design
10:20 ,wrong!!!!, you cant take the length 42 mm,its nowhere given,42 is the radius of the arc only.
to draw the rib you should draw the 42 mm arc first ( from fig : we can understand that the origin of arc is 42 mm(radius) down ,that will be at the bottom left edge of the cylinder ) then tangent the slanted line and then extrude the rib ,then fillet the 12 mm curve.
nice video bro, adding my like got 1K likes
Nice Explain Sir
I love this way to teach
Absolutely fantastic, except that's extremely difficult if not impossible to machine as it stands.
I've been toolmaking for 38 years so I know what I'm talking about.
Nice Class Sir
Sir.
I am always getting confused while drawing any sketch like lines, circles etc on any face or point of already sktched part. While I sketch a line on a surface , it comes in another plane.
Pl guide.
In solid works 2022 version, during rib operation, it is asking to select body to extrude the sketch....It is showing as this "The resulting rib does not intersect the existing model."
stuck at 6:15 , filet its in other side , how to change that ?
Grate job, thanks for sharing
nice video. I enjoyed it.
Hey Nice work. Where can I find the 2D drawings you use to draw after?
On your keyboard use the keys"PS" (meaning "Print Screen") then past into MS paint and save as whatever file format you like the best and there you have it.
Thank you so much, teacher
Does someone know what kind of component this is?. Where is it used for?. Thank you in advance!
thank you, fast and nice video
thank you so much. it was cool.
Hi. Nice vedio. Can make one vedio just explaine settings of SOLIDWORKS tools..
great video
Great video, thanks!!!
I still do not get why you added 6 explaining it will go around. It's still 125-68-6= 57. I don't get it.
Can you explain the purpose of making the cosmetic thread? Thank you.
Would you please make one example tutorial making a boomerang with 3 wings?
Eres un excelente profesor
sir which computer you are using?
and specification?
great video. thanks a lot
❤so nice
It´s a good video,do you know how to do a lego set?o where can i find its measures?
great video!!!!
nice video
Sir pls upload a video on how to read 2d drawings and convert it into 3d model
Hi. Do you have all lectures
How did you get the 63 dimension at 4:21?
125 mm - (68mm-6mm) = 63
Sir my fillet moves in opposite direction, can u plzz help me
10:20 ,wrong!!!!, you cant take the length 42 mm,its nowhere given,42 is the radius of the arc only.
to draw the rib you should draw the 42 mm arc first ( from fig : we can understand that the origin of arc is 42 mm(radius) down ,that will be at the bottom left edge of the cylinder ) then tangent the slanted line and then extrude the rib ,then fillet the 12 mm curve
remarkable.
Good video Sir. There is a 1mm dimension given in the last step of extruding can you please explain how you find it?
Thank you for your exercise
Hey, can you just tell me how to add shining in materials? I make the model you drawn here in a similar way but in this video, your model is shining and mine not. Why?
Hello. Sir
I m learning solidwork, but having difficulty to make 3d object by using multiple views when u dont have isometric view. I m not able to imagine that how that part will actually look like by combining multiple views. Help me.
When I did this part when I was doing the cylinder portion of it I did a reference plane 120 mm upwards off of the bottom face and then did a construction line that was lined with the center of the part that was dimensioned to 125mm. That way your not doing the math when you extrude it
1mm distance is given in the last step in rib construction.. Why?
Please try to make one video to explain the settings in solidworks
Very good
very good video
Can you show us how to make this tutorial with simulation , please ?
Nice
In 2016 edition where i can found brushed steel ???
How u took 42 rib
dell i5 laptop will wrk solidworks smoothly
thank you for sharing.
Thank you boss
Can anyone tell me from where i can have drawing jgp file of this part.
screenshot !
please make a tutorial on tesla cyber truck
I m new this line big problem 2d drawing side view top view front view...
Hi. I have a question. What is the point to change this line 10:13 to a Construction Geometry. I didn't do that and have the same(?) result.
Tomasz Brzozowski hello buddy, you just need to click on the line, then on left hand side a menu comes, select construct geometry, your line will become that. Hope this will help. Or just click on the line by pressing the right button of mouse then select the construction line option.
@@kushagrak960 Hello, thank you for your answer, but the question was: what for should i do that?
Thanks sir
❤thanks
Thank you.
Can you download pdf of this exercise thank you
Thank you!
where did you get 1 mm at the end before you create the Rib. Blueprint doesn't have that man
Younes IHAD The drawing says 14mm. Look at the flat part of the rib.
Younes IHAD he is not talking about the thickness of the rib. he is referring to the 1 mm dimension used at the right plane for the cross-sectional of the rib. I tried drawing without the 1 mm but the software could not create the rib without the 1 mm dimension.
Onifade Abdulraheem I have created rib without 1mm distance and it works fine. Software can create the rib without 1mm gap.
Good
Bravo thanks
How can get drawing for practice
Superb
Thank you
Sir please video hindi language me bhi banaiye na
perfecto
Nycly explain
thanks...
Sir Design engineer ki job h
Bro I have a problem during the Installation of solidworks. In the Toolbox / Hole wizard option the Toolbox installation location was displayed as not found....Plz help me to resolve 🙏
👏👏👏👍✌️
thanx
10:27 Sir 42 length kyo li
How
obrigado :)
Nice , BUT drawing is not given in orthography.
thx sir
You're doing a fully blind operation. There is no any industrial way, to make the part.
Sr please get how to model gear in all type
如果有字幕就好了！
yes my habbibi
Sir can I install SolidWorks software in windows 7 it has 32 GB ram please answer me.