I've been fighting my drawer for over an hour. Wish I had found your video first prior to the other 50 useless videos on the same topic. Thank you for great thorough instructions!
Tthis is the best, most detailed description on the Internet/UA-cam. Thank you so much for giving me a lot of information to work with. Please post more videos like this and I will watch them! Take care.
Thank you. The rails kept coming off the track. Following your directions to extend the track all the way out and keep the bearings in place helped a lot.
This explained how to install a drawer properly if you're stuck. Seema like a simple job, but now I know a lot more about those finicky slides and how they work.
Thanks for the tip about holding the ball bearings forward in the track with a screwdriver. I was really stuck putting a hide-a-bed together until I saw that. Worked great!
Thanks for posting this video. Things may seem simple if you have done them hundreds of times but if not it can be confusing. My daughter's bathroom drawer was off track and your video helped me get it removed and re-installed. I think 269K views shows that a lot of people appreciate your video. Thank you so much!
This helped me put my drawer back in - along with aligning it, I also had to take the metal slider out with the balls and straighten it out as it had been jammed and bent, then I put all the balls back into place. It all worked. This video helped tremendously.
Great video. What also helped was at 1:51 in the video, it shows the open end on the rail going into the cabinet. The desk we bought had the rails on the wrong way, so no wonder we were having problems with the install.
Thank you, I was stuck assembling a bathroom unit that had the instruction "put the drawer into the chest". The track was moving to the back and of course the drawer wouldn't close.
Thank you so much for this video! I ordered the ekby alex wall shelf and broke one of the slides while trying to screw the drawer to the railing. Saved me a lot of time and frustration because we all know that IKEA has some of the worst customer service!! Love from Texas ❤
Thank you for your video! We almost gave up on our kitchen cabinet cause we couldn't figure out why the drawers just wouldn't slide in. Didn't think to hold the sliders in place and pushing the drawer in would help! Thank you again!
Thank you! I was really having a tough time figuring out what I was doing wrong. Your video and explanation provided all the nuances I needed to get the job done.. The inner assembly with the ball bearings kept sliding back and not staying put inside the track. But I see what you did to make them position properly and even to pull them forward after the drawer was partly engaged.
Thank you for this video...! "Re-insert drawer" much easier said than done with these slides...I think I screwed something up when re-inserting because it's not sliding smoothly but at least I know how it's supposed to work now, thank you!
The demo has been quite useful in handling my drawers when I wanted to set the movements smooth. in fact I discovered that something had fallen inside which was obstructing the sliding motion of the rails. Thanks for helping me..
Removing is easy when I saw how to do it with those little latches on the sides, but reinserting these drawers are a nightmare. I am still trying to figure it out.
Somebody got saw dust in my new rails (King Slide Canada). What can I clean the mess with? Mineral Spirits, or some type of paint thinner? What's the grease used? Can I use care brake pin silicone paste? I have AGS sylglide, very nice silicone paste, looks yellow like that.
I agree with the other comments that state this video has been a great help! The details provided were the missing factors in all others. However with that being said I still can not get my drawer in and hope someone can give me a pointer. I hear it click and the drawer feels right and slides...but...stops abruptly about the exact same distance as far as the silver guide which holds the ball bearings stops (about 3 inches from being fully closed) . It works perfectly EXCEPT for the fact it is approximately 3 inches from being fully closed. I have been working 4 four hour and I think there must be something simple I am overlooking. Help..anyone! Thank you so much in advance!
Find the spot that stops the slide going in. Take out the drawer, look at ONE slide only as you would check it using a microscope (not a real microscope) and find what stops it. It is possibly the rim of a screw holding the slide in the cabinet gable that isn`t turned in deep enough. Don`t strip out the screw threads either, pre-drill & countersink as necessary. Let us know what happened.
i have a steel filing cabinet and the lowest drawer is stuck closed. the drawer has a little tab that you slide with your thumb to open it, but that tab seems stuck. any advice?
Ayyayayay ... advice:no. Idea: tap lightly around the button and sides with a hammer to unstuck sliding latch parts If no success, rotate whole cabinet upside down or in some other position to unstuck latch bars. I know the contents spill everywhere at this point. Maybe prying open with a flatbar? (finishing carpentry tool for moulding & baseboard installation) Last resort: cut open sides with tin snips. Power grinder would dirty everything inside and sets papers on fire.
My problem was that the drawer had partially come out of the rail and was not closing smoothly. I took it out, I cleaned it and put 3-1 oil on it (though it probably needed something else). to re-assemble, i learned from the video to push the steel cage all the way up to the front of the drawer; I had to push hard using a screwdriver. After that, as I slid the drawer back in, it kind of stopped about 5 inches from being completely closed, like cherylanne mentioned. I forced the drawer back in place though it met with some resistance and it now rolls back and forth and shuts all the way. It doesn't seem absolutely perfect, but pretty close.
Is there any way you can still slide the draw back in working normally if you lost a few of the tiny bearing balls? Looks like I’m going to have to hunt down a whole bag of them just for a couple of lost ones
Yes it will with some fiddling. For less misery, you might want to re-distribute the balls evenly (move a few of them to fill in a gap in the line somewhat), until you find the size you need.
They do come out with some banging / forcing. Usually involves bending their retainer clip out-of-shape. So the balls go back in the round holes in it but look for deformation in the metal to keep the balls in place.
I've been fighting my drawer for over an hour. Wish I had found your video first prior to the other 50 useless videos on the same topic. Thank you for great thorough instructions!
You're welcome!
Tthis is the best, most detailed description on the Internet/UA-cam. Thank you so much for giving me a lot of information to work with. Please post more videos like this and I will watch them! Take care.
Glad it was helpful!
I’m a 50+ year old woman trying to disassemble and reassemble a huge set of map drawers and this video solved a couple of big problems. Thank you!
Same!
Thank you. The rails kept coming off the track. Following your directions to extend the track all the way out and keep the bearings in place helped a lot.
This explained how to install a drawer properly if you're stuck. Seema like a simple job, but now I know a lot more about those finicky slides and how they work.
Thanks for the tip about holding the ball bearings forward in the track with a screwdriver. I was really stuck putting a hide-a-bed together until I saw that. Worked great!
Me too
Thanks for posting this video. Things may seem simple if you have done them hundreds of times but if not it can be confusing. My daughter's bathroom drawer was off track and your video helped me get it removed and re-installed. I think 269K views shows that a lot of people appreciate your video. Thank you so much!
Thanks for watching!
MOST helpful vid I found solving my issue which was ball bearing strips were not all the way forward when installing drawer. Thank you!!
This helped me put my drawer back in - along with aligning it, I also had to take the metal slider out with the balls and straighten it out as it had been jammed and bent, then I put all the balls back into place. It all worked. This video helped tremendously.
I cannot read some of the words
Thank you so much for your video. It proved to be just what I needed to get my drawers back in.
Thanks, I have struggled with this all day.
Thank you so much for the video. I tried to put a drawer on today like this one and wasn't sure about how to do it, now I know. Thanks so much.
+Karen Miller You`re welcome.
Great video. What also helped was at 1:51 in the video, it shows the open end on the rail going into the cabinet. The desk we bought had the rails on the wrong way, so no wonder we were having problems with the install.
Thank you so much! I bought a desk from someone who assembled a drawer incorrectly (bent it) and your video helped me fix it. Cheers!!
You're welcome!
Thank you, I was stuck assembling a bathroom unit that had the instruction "put the drawer into the chest". The track was moving to the back and of course the drawer wouldn't close.
Great. Before I have been trying how to remove it but no luck, thanks for your video.
Thanks so much. This video helped me to take out the draw to grab something that fell behind.
Thank you so much for this video! I ordered the ekby alex wall shelf and broke one of the slides while trying to screw the drawer to the railing. Saved me a lot of time and frustration because we all know that IKEA has some of the worst customer service!!
Love from Texas ❤
Thanks for watching!
Thank The Lord for this video! Thank you for being an instrument to post this. 🤗😍
Thank you for your video! We almost gave up on our kitchen cabinet cause we couldn't figure out why the drawers just wouldn't slide in. Didn't think to hold the sliders in place and pushing the drawer in would help! Thank you again!
Glad I could help!
Thanks for the video...it helped me to remove the drawer without the help of anyone...
My stuff was stuck, I searched UA-cam .....thank you so much for the video
Saved my sanity... thank you so much.
This video saved my day... it is really pointing out the important issue.... Thank you
You're welcome!
Thank you so much this helped me a lot to put back the drawer ❤
Love from India
Thank you for this video. It was a big help to me when moving a file I purchased at a resale shop.
Thank you! I was really having a tough time figuring out what I was doing wrong. Your video and explanation provided all the nuances I needed to get the job done.. The inner assembly with the ball bearings kept sliding back and not staying put inside the track. But I see what you did to make them position properly and even to pull them forward after the drawer was partly engaged.
You're welcome!
I literally was going very crazy trying to get my drawer A-line thank you very much for this video
Glad I could help!
Thank you, this worked. We were able to reinstall the drawer.
You are welcome!
Thank you for this video...! "Re-insert drawer" much easier said than done with these slides...I think I screwed something up when re-inserting because it's not sliding smoothly but at least I know how it's supposed to work now, thank you!
Yeah!
Thanks for sharing. Awesome 👍
Thanku so much.. Removed, greased and fixed my stucked drawer with the help of this video. Thanku so much
Thanks, bro, no worries.
Yeah thanks again... And I am sis 😇.
Thanks a lot for this video sir......I was trying to assemble the unit and did it but it won't go in....but this helped me.... thanks once again....
Thank you thank you thank you! I was like they came out.... why won’t they fit back in! All fixed :)
The demo has been quite useful in handling my drawers when I wanted to set the movements smooth. in fact I discovered that something had fallen inside which was obstructing the sliding motion of the rails. Thanks for helping me..
Wonderful!
I had been struggling for ages - so had a google! Thank you - instructions so clear - THANK YOU!!!!
You saved my day 👍
Thank you....this helped me alot !
I also had to take out that metal cage !😊😊
Yeah ... those cages suck. Thanks for watching!
Removing is easy when I saw how to do it with those little latches on the sides, but reinserting these drawers are a nightmare. I am still trying to figure it out.
Thankyou for guiding.it helped alot
Thanks for this useful tips
Thank you! Going to go and try again now 😅
Best video on subject
I don’t even think I was born when he made this video
(hearted)
Somebody got saw dust in my new rails (King Slide Canada). What can I clean the mess with? Mineral Spirits, or some type of paint thinner? What's the grease used? Can I use care brake pin silicone paste? I have AGS sylglide, very nice silicone paste, looks yellow like that.
Saved my day, thank you
Glad it helped!
TY!! Just found a bunch of missing undergarments and leggings!
Thanks a lot
Do the bearing balls need to underneath the track ? Its not working for me
I agree with the other comments that state this video has been a great help! The details provided were the missing factors in all others. However with that being said I still can not get my drawer in and hope someone can give me a pointer. I hear it click and the drawer feels right and slides...but...stops abruptly about the exact same distance as far as the silver guide which holds the ball bearings stops (about 3 inches from being fully closed) . It works perfectly EXCEPT for the fact it is approximately 3 inches from being fully closed. I have been working 4 four hour and I think there must be something simple I am overlooking. Help..anyone! Thank you so much in advance!
Find the spot that stops the slide going in. Take out the drawer, look at ONE slide only as you would check it using a microscope (not a real microscope) and find what stops it. It is possibly the rim of a screw holding the slide in the cabinet gable that isn`t turned in deep enough. Don`t strip out the screw threads either, pre-drill & countersink as necessary.
Let us know what happened.
i have a steel filing cabinet and the lowest drawer is stuck closed. the drawer has a little tab that you slide with your thumb to open it, but that tab seems stuck. any advice?
Ayyayayay ... advice:no.
Idea: tap lightly around the button and sides with a hammer to unstuck sliding latch parts
If no success, rotate whole cabinet upside down or in some other position to unstuck latch bars. I know the contents spill everywhere at this point.
Maybe prying open with a flatbar? (finishing carpentry tool for moulding & baseboard installation)
Last resort: cut open sides with tin snips. Power grinder would dirty everything inside and sets papers on fire.
My problem was that the drawer had partially come out of the rail and was not closing smoothly. I took it out, I cleaned it and put 3-1 oil on it (though it probably needed something else). to re-assemble, i learned from the video to push the steel cage all the way up to the front of the drawer; I had to push hard using a screwdriver. After that, as I slid the drawer back in, it kind of stopped about 5 inches from being completely closed, like cherylanne mentioned. I forced the drawer back in place though it met with some resistance and it now rolls back and forth and shuts all the way. It doesn't seem absolutely perfect, but pretty close.
theoverengineer thanks. i banged and pulled and tipped until the damn thing opened
Thank you so much buddy😛
thank you! very helpful!
No worries!
Thanks for the video I'm going to try it now I'm having problems with the drawer on my travel trailer. It's not going all the way in on one side
Thank you:)
Thank you!
Very useful
Excellent.
Thank you so much bro
No problem
Thank you
thanks bro..👍🏻👍🏻👍🏻
Is there any way you can still slide the draw back in working normally if you lost a few of the tiny bearing balls?
Looks like I’m going to have to hunt down a whole bag of them just for a couple of lost ones
Yes it will with some fiddling. For less misery, you might want to re-distribute the balls evenly (move a few of them to fill in a gap in the line somewhat), until you find the size you need.
thank you sir
Tq this worked for me
In my case it requires to push down the right side and hold up side at left side so adust accordingly
Thanks
thanks
Great
شكرا
Ya right tear up the screws and end up loosening the rails.
What to do if ball bearings come out??
They do come out with some banging / forcing. Usually involves bending their retainer clip out-of-shape. So the balls go back in the round holes in it but look for deformation in the metal to keep the balls in place.
@@theoverengineer ty for d reply... But my work is done...
I can remove it but cant install it
Thank you, but I m stupid , just understand some :)
On WoodPrix you can find excellent plans for woodworking.
Cool, thanks for sharing.
just what i needed with good camera angles. the light wood also helped
Awesome to me Arcuri. Best plans
Omg it's Jean-Claude Van Damme
bonjour
@@theoverengineer 🤭🙋
J0998
Too much BS. Get to the point.
Thank you
You're welcome
Thanks