This video provides very good and useful information to import Mini DV Tapes for persons with an apple computer that only has thunderbolt ports. However, it would have been nice if, they had just left one Fire-wire 800 port and one standard USB port on the newer apple computers. What happen to the fun with apple computers? During the 2000's using iLife and iWorks, it was all about ease of use. Since, I am old school my newest desktop is a 2010 Mac Mini with a built-in DVD drive, one Fire-wire 800 port, four USB 2.0 ports, and a Mini Display port. Therefore, importing is a snap just one cable from video recorder to my computer.
Yes, but you'd need to use a DV camcorder or converter to first convert the analog video to digital. Here's a short article on this subject: lifeflix.zendesk.com/hc/en-us/articles/203125839-Does-LifeFlix-support-VHS-import-
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need! Apple Thunderbolt to FireWire Adapter Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
I have plugged in my Panasonic minidv camera via dv to firewire 400 then to firewire 800 then to thunderbolt then to USB-C and Lifeflix is not bringing up any video on my 2023 Mac. Any ideas of what I can do?
Hi if you are using the appropriate cables and adaptors (Firewire cable and Thunderbolt adaptors and not a USB cable because a USB cable/port will not work to connect the camcorder), your camcorder should be recognized by the software. You can give the following steps a try:
Confirm you are using Mac OSX 10.7 or later. Keep your camcorder powered on and in VCR mode (sometimes called VTR or Play mode) Unplug the FireWire cable and any adaptor you're using from both the camera and the computer Quit LifeFlix Plug the FireWire cable and any adaptor you're using back into both the camera and the computer Re-launch LifeFlix Click ""Import"" Hope this works, if it does not work either, please contact our support and we will guide you. lifeflix.zendesk.com/hc/en-us/requests/new
Hi there , so all I need is an AC adapter suitable for a Sony dvc hc19e and then a thunderbolt to FireWire ? Is there any specific type of thunderbolt to FireWire adapter or can I get any?
Hi! Yes, we are aware, thank you! My brother and I developed LifeFlix after initially using iMovie for our own MiniDV tapes. We wanted a dedicated capture app and we also noticed that iMovie started losing some support for capturing MiniDV tapes (audio capture with Canon camcorders is particularly problematic for some reason). Bottom line, if iMovie works for you then that's your solution. If not, we hope people will give LifeFlix a try. There's a free trial and even after purchasing, if you're not 100% guaranteed we'll refund your money.
Thank You. I have DV / mini firewire out from my old Sony DCR DV camcorder. My old iMac has both firewire and thunderbolt inputs. Can I just use the mini firewire to standard firewire to to do this (ie do I need the extra firewire to thunderbolt adopter - $50 for Apple!). Thanks
LifeFlix supports most DV camcorders. We offer a full refund if your camcorder is not supported. You can import your footage uncompressed if you're worried about quality. One hour of uncompressed DV will be about 13 GB.
Glad to inform you there is a better way to transfer your tapes to your Mac or to your hard drive. It's a Sony HVR- M15 au. All it does is play or record to your DV tapes. Very best way to play or record to Dv, HDV or DVCAM.
Anyone knows if you use the usb port connections instead would be the same process? as my jvc camera has both and like to use usb cable but does not show up like firewire connection!? any tip will be appreciated.
Hi! Thank you for the video it's really useful knowing that I've been searching the solution for a while now... Is it alright if the cable is mini firewire to USB?
Hi Leeloo, unfortunately the USB port from the camcorder cannot transfer data fast enough. Therefore you need to use the Firewire port from the camcorder.
it keeps cutting the recording even when theres no cut in the video. how can i turn off scene detecting and stop it from ending the recording until i choose to???
LifeFlix will detect segments in your tape depending on how your footage was recorded or how it may read breaks. At times these breaks may cause the footage to be dropped, causing the capture to end.
Please try the following.
Manually fast forward then rewind your tape. Use a head cleaner on your device. Once you reach the drop point during capture. fast forward past that part from your device.
LifeFlix DV Importer for Mac I connected my usb to FireWire that I purchased from the Apple store. Isn’t that what you did in the video as well? Sorry I’m not tech savvy
Hi Ivan, you'll need to daisy chain together a couple adaptors. First a Firewire to Thunderbolt (1 or 2). Then another one to Thunderbolt 3/USB C. It's clumsy but it works!
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need! Apple Thunderbolt to FireWire Adapter Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
I want to connect a Canon HV20 to a MacPro to import videos into iMovie. I'm not sure what firewire cable and thunderbolt adapter I need. any suggestions.
Hi Sandra, you'll need to daisy chain together a couple adaptors. First a Firewire to Thunderbolt (1 or 2). Then another one to Thunderbolt 3/USB C. It's clumsy but it works!
I have a firewire 400 from my camera to a firewire 800 adapter to a firewire - Thunderbolt adapter. But in the network settings it says "the Thunderbolt Ethernet cable is not connected or the device at the other end is not responding." The camera is in VCR mode, and all the cables are connected. does anyone know what could be the problem?
At 4:00 you say 'found the camera' ... but my Lifeflicks cannot detect the camera. What next? It would be good that you explain importing rather than sorting boxes for your tapes...
Hi Danny, can you try some of the things mention at help.lifeflix.com/hc/en-us/articles/203124889-Camera-is-not-connecting-. If none of these work please send us an email at support@lifeflix.com and we'll get it figured out. Thanks!
1. Confirm you are using Mac OSX 10.7 or later. 2. Keep your camcorder powered on and in VCR mode (sometimes called VTR or Play mode) 3. Unplug the FireWire cable and any adaptor you're using from both the camera and the computer 4. Quit LifeFlix 5. Plug the FireWire cable and any adaptor you're using back into both the camera and the computer 6. Re-launch LifeFlix 7. Click ""Import""
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need! Apple Thunderbolt to FireWire Adapter Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need! Apple Thunderbolt to FireWire Adapter Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
You'll need to daisy chain together a couple adaptors. First a Firewire to Thunderbolt (1 or 2). Then another one to Thunderbolt 3/USB C. It's clumsy but it works!
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need! Apple Thunderbolt to FireWire Adapter Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
This video provides very good and useful information to import Mini DV Tapes for persons with an apple computer that only has thunderbolt ports. However, it would have been nice if, they had just left one Fire-wire 800 port and one standard USB port on the newer apple computers. What happen to the fun with apple computers? During the 2000's using iLife and iWorks, it was all about ease of use.
Since, I am old school my newest desktop is a 2010 Mac Mini with a built-in DVD drive, one Fire-wire 800 port, four USB 2.0 ports, and a Mini Display port. Therefore, importing is a snap just one cable from video recorder to my computer.
is it possible to import using RCA (red white yellow) cables?
Yes, but you'd need to use a DV camcorder or converter to first convert the analog video to digital. Here's a short article on this subject: lifeflix.zendesk.com/hc/en-us/articles/203125839-Does-LifeFlix-support-VHS-import-
Still got my G5 iMac so no need for adapters..... old is better
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need!
Apple Thunderbolt to FireWire Adapter
Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
Not seeing a link. Could you please provide specifics? I seer there are multiple thunderbolts, etc.
@@colleenzurek2455 amzn.to/2RifNfp
amzn.to/2Ri3kZ3
thank you man this really helped today
Hi, Where do I find the driver for mac osx sierra? I have a "mini Fire wire" To usb only is that good? Thank you
Can you help me please can a firewire cable power the camcorder without battery and charger
Hi LeGameur, your best bet for this is eBay.
Panasonic Made a DV and Mini-DV deck, the PANASONIC AG-DV2500P
I have plugged in my Panasonic minidv camera via dv to firewire 400 then to firewire 800 then to thunderbolt then to USB-C and Lifeflix is not bringing up any video on my 2023 Mac. Any ideas of what I can do?
Hi if you are using the appropriate cables and adaptors (Firewire cable and Thunderbolt adaptors and not a USB cable because a USB cable/port will not work to connect the camcorder), your camcorder should be recognized by the software. You can give the following steps a try:
Confirm you are using Mac OSX 10.7 or later.
Keep your camcorder powered on and in VCR mode (sometimes called VTR or Play mode)
Unplug the FireWire cable and any adaptor you're using from both the camera and the computer
Quit LifeFlix
Plug the FireWire cable and any adaptor you're using back into both the camera and the computer
Re-launch LifeFlix
Click ""Import""
Hope this works, if it does not work either, please contact our support and we will guide you.
lifeflix.zendesk.com/hc/en-us/requests/new
Hi there , so all I need is an AC adapter suitable for a Sony dvc hc19e and then a thunderbolt to FireWire ? Is there any specific type of thunderbolt to FireWire adapter or can I get any?
This short article explains which adaptors you'll need: lifeflix.zendesk.com/hc/en-us/articles/211628426-Mac-Camera-Connection-Guide
iMovie imports DV just fine + is already installed on every mac. No need to buy.
Hi! Yes, we are aware, thank you! My brother and I developed LifeFlix after initially using iMovie for our own MiniDV tapes. We wanted a dedicated capture app and we also noticed that iMovie started losing some support for capturing MiniDV tapes (audio capture with Canon camcorders is particularly problematic for some reason). Bottom line, if iMovie works for you then that's your solution. If not, we hope people will give LifeFlix a try. There's a free trial and even after purchasing, if you're not 100% guaranteed we'll refund your money.
@@lifeflix.videos Ah, you are the developers, did not check YT username.Good luck with your product, seems to be good!
This was very helpful. Thank you!
What other program can import DV? In my Mac Bock Pro LifeFlix it is blocked, does not open.
Hi Irina, you could try iMovie. Some older camcorders will not be detected though. Good luck!
Can OBS Studio be used as the software?
Thank You. I have DV / mini firewire out from my old Sony DCR DV camcorder. My old iMac has both firewire and thunderbolt inputs. Can I just use the mini firewire to standard firewire to to do this (ie do I need the extra firewire to thunderbolt adopter - $50 for Apple!). Thanks
Hi Peter, if you have an old iMac with a firewire input you don't need an extra adaptor.
Please link what cable the firewire is, the 9pin to 4 pin i bought does not fit the camera which is the same as yours.
Hi, could you let me know which brand and device model you are attempting to use?
Best explanation on the internet this.
Why iMovie does not see my Samsung VP-D453i?
iMovie is losing support for some camcorders. If you send an email to help@lifeflix.com we can help get LifeFlix working for you.
Software is too expensive plus there is no microMV import, which is something lacking in modern software.
Can you put a link for where to buy the firewire cable? I can't find one anywhere.
Please see the following listings: Apple Thunderbolt to Firewire Adaptor: www.ebay.com/p/1730373590 DV to Firewire 800: a.co/d/7iq70x1
hello! thanks for the video. does it matter what camera I use? Don't know if I can compromise quality like that. thanks!
LifeFlix supports most DV camcorders. We offer a full refund if your camcorder is not supported. You can import your footage uncompressed if you're worried about quality. One hour of uncompressed DV will be about 13 GB.
Wgat about transfering the audio?
Yes, the audio is transferred also!
Mine is producing video but no audio. Any ideas?
Can you send an email to help@lifeflix.com? We'll get right on it! Thanks!
Glad to inform you there is a better way to transfer your tapes to your
Mac or to your hard drive. It's a Sony HVR- M15 au. All it does is play
or record to your DV tapes. Very best way to play or record to Dv, HDV or DVCAM.
wonderful explanation, thanks
Anyone knows if you use the usb port connections instead would be the same process? as my jvc camera has both and like to use usb cable but does not show up like firewire connection!? any tip will be appreciated.
The USB port will only transfer images, not video. It doesn't have enough bandwidth for video so only the Firewire port can be used for that.
I have a Sony DVR TRV 18 Handycam. But it has a cable that you said but the other end is a USB PORT.
Hi! The DVR TRV has a USB and Firewire port. You'll need to use the Firewire port to transfer video from the MiniDV tape. Thanks!
Hi! Thank you for the video it's really useful knowing that I've been searching the solution for a while now... Is it alright if the cable is mini firewire to USB?
Hi Leeloo, unfortunately the USB port from the camcorder cannot transfer data fast enough. Therefore you need to use the Firewire port from the camcorder.
@@lifeflix.videos okay thank you so much !
What happens if the only connections on the camcorder is audio+tv?
Usually there is a VCR or VTR setting to play the video.
What about importing HD mini DV tapes from and old Sony HVR-A1J camera into Mac OSX Mojave??
Hi Moe, we support HDV tapes and camcorders. In fact I personally was importing some HDV tapes from circa 2006 a few weeks ago.
it keeps cutting the recording even when theres no cut in the video. how can i turn off scene detecting and stop it from ending the recording until i choose to???
LifeFlix will detect segments in your tape depending on how your footage was recorded or how it may read breaks. At times these breaks may cause the footage to be dropped, causing the capture to end.
Please try the following.
Manually fast forward then rewind your tape.
Use a head cleaner on your device.
Once you reach the drop point during capture. fast forward past that part from your device.
HELP!! For some reason my camera isn't connecting...not sure what I did wrong. My camera is saying to change mode to use usb???
Hi SheCoop, you can only transfer video from a DV or Digital8 camcorder via Firewire, not USB. I hope that helps!
LifeFlix DV Importer for Mac I connected my usb to FireWire that I purchased from the Apple store. Isn’t that what you did in the video as well? Sorry I’m not tech savvy
@@shecoop6633 Can you send an email to help@lifeflix.com and we'll help you troubleshoot this?
Hi. How I transfer my mini dv cam tape. Cam has firewire but new laptop doesnt have thunderbolt, only usb C and hdmi port. Thanks.
Hi Ivan, you'll need to daisy chain together a couple adaptors. First a Firewire to Thunderbolt (1 or 2). Then another one to Thunderbolt 3/USB C. It's clumsy but it works!
@@lifeflix.videos thank you very much
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need!
Apple Thunderbolt to FireWire Adapter
Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
I want to connect a Canon HV20 to a MacPro to import videos into iMovie. I'm not sure what firewire cable and thunderbolt adapter I need. any suggestions.
Hi Sandra, you'll need to daisy chain together a couple adaptors. First a Firewire to Thunderbolt (1 or 2). Then another one to Thunderbolt 3/USB C. It's clumsy but it works!
You can buy the dv cameras from £30
I have a firewire 400 from my camera to a firewire 800 adapter to a firewire - Thunderbolt adapter. But in the network settings it says "the Thunderbolt Ethernet cable is not connected or the device at the other end is not responding."
The camera is in VCR mode, and all the cables are connected. does anyone know what could be the problem?
You seem to need a few more adapters to complete the chain.
Krank is de Eerste no?
At 4:00 you say 'found the camera' ... but my Lifeflicks cannot detect the camera. What next? It would be good that you explain importing rather than sorting boxes for your tapes...
Hi Danny, can you try some of the things mention at help.lifeflix.com/hc/en-us/articles/203124889-Camera-is-not-connecting-. If none of these work please send us an email at support@lifeflix.com and we'll get it figured out. Thanks!
Hey, it says "no camcorder detected" I have a panasonic nv-gs11 and a macbok high sierra, pls help me thanks
1. Confirm you are using Mac OSX 10.7 or later.
2. Keep your camcorder powered on and in VCR mode (sometimes called VTR or Play mode)
3. Unplug the FireWire cable and any adaptor you're using from both the camera and the computer
4. Quit LifeFlix
5. Plug the FireWire cable and any adaptor you're using back into both the camera and the computer
6. Re-launch LifeFlix
7. Click ""Import""
what kind of camera is that?
Great video! Helped my exact problem.
Thank U
Denis
Do you have to have an apple computer to , this? What Other Computer I can use ? Can you list some of them, please ?
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need!
Apple Thunderbolt to FireWire Adapter
Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
Will this work if I buy a firewire that connects to the USB port of the Macbook instead of the thunderbolt? Thanks!
Unfortunately you'll need to use the Thunderbolt port, USB isn't fast enough to transfer DV video. Thanks!
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need!
Apple Thunderbolt to FireWire Adapter
Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter
@@Yoncena thank u
yim
so if i use a USB-C then what to do now? :)
You'll need to daisy chain together a couple adaptors. First a Firewire to Thunderbolt (1 or 2). Then another one to Thunderbolt 3/USB C. It's clumsy but it works!
@@lifeflix.videos so if i have a USB-C to USB plug and then plug the Firewire to USB won't work? Only when you have the Thunderbolt?
@@safrantommy2075 Yes, that is correct. The video from old DV camcorders cannot be transferred via USB. Only Firewire or Thunderbolt.
To do this on a new Mac with usb-c you would need to buy two cable connecters which are the firewire- thunderbolt and then thunderbolt to USB-C which I will link below. Thats all you need!
Apple Thunderbolt to FireWire Adapter
Apple Thunderbolt 3 (USB-C) to Thunderbolt 2 Adapter