Extreme skill ! If you had the means of Western countries, you would do even better. But it is the genius of your workers that is the best. I wish you good health and great... great financial health. Good luck. (Algerian)
at 17 minutes no keyway, then they spin it at 18 minutes and magically there what looks to be four or more 4" x 20" keyways. Would have like to see how that was done....
Guys you are doing a good job with limited amount of resources; I guess the life must be cheap in Pakistan as safety gear is non existent - machinist working without safety glasses!!!!!!!!! Loose your eye and the owner gets a new worker - cheap.
At least these guys look like they take care of their equipment, most of the places are outdoors in the dirt and the equipment isn't taken care of very well.
You’re being a little sarcastic here methinks!? Right tho! Amazing is an overstatement, but they do well when you consider the infrastructure and open air conditions! Cheers
Một trục kim loại to lớn có chất liệu thép rất cao, để tiện được thành sản phẩm giá trị cao, thật sự là một thách thức trí tuệ,qua biểu tượng nâng niêu của các bạn cuối cùng bóng sáng,cho thấy các bạn phân kim rất giỏi và rất thông minh, đó mới là trí tuệ ánh sáng, cảm ơn video chia sẻ của bạn rất hay và ý nghĩa, chúc các bạn sức khỏe hạnh phúc thành công.
@@GamingStarslegends01 Do you know if there is a video that shows from the mining of the stones (raw material) to the finished product? It would be interesting to see from stone to steel (or whatever metal) product.
In this case and that goes for many steel products in Pakistan, it's mostly salvaged parts from oceangoing freighters/ cruiseschips etc. It says in the title something about a shaft from a ship so that would be the propellorshaft. So then you would have to back to the late '70's or the '80's to first see the ore being mined for this shaft, then being forged and hammered in (probably) a European shipyard and conclusively turned on an even bigger lathe then this😅. Then after 30/40 years sailing across the world the ship's a write off; gets beached on the Pakistani beach and scrapped. And there you have your shaft here in this movie...
yeah, it doesnt look like the chain is large enough to carry such an immensely heavy object...it also depends on the grade the chain has, if it is grade 100 or 120 , of course it will hold much heavier objects than a ordinary grade 80 chain, but if i had to guess, the Indians dont get to use such high grade chains due to the cost, a grade 120 chain, is just much much more expensive than 80 grade....to be able to lift a 15 ton object, i think at least the chain dia should be more than 16mm , preferable 20mm or more...its hard to tell wht diam., chain theyre using here....
I often would stack 1 inch carbide cutters when ruffing out pieces like these and spend the day on a grain shovel shoveling chips. Ahh, the good old days eh.
@@thepubliceye I think that the roof is full of holes as you can see that it's probably raining inside, you can clearly see the water splash on the part.
I hope people watching this will understand the cost of the steel material alone that the shop owner has invested in this part. Plus many hours of labor to have it machined correctly. It only take one wrong cut by the machinist to make this into a huge piece of scrap metal. Then the shop owner has to replace the steel and start machine work over again. If this was a 15 ton part to start with in the US thats around $30k or more worth of steel. More if its an alloy. This looked like mild steel forging.
These are Irish workers in the milling workshop in Youghal County Cork Ireland 🇮🇪. As you can see they have full Health and Safety protection. Half of the staff must be Females for a neutral gender balance.
Your comment said this work is done in Ireland, these men look and dress like middle Eastern, or Pakistan. I very dought that Ireland would have industrial working with such lacking safety rules.
@@jeromemuller962 Hi Jerome. Thanks for your reply. You are 1,000 % correct. In Ireland they would all be put in Jail because of the many many breaches of the Health & Safety at Work Acts.
@@taphhedrof1045 so your comment was a touge and cheek. Half of staff must be female, here in the USA, you don't find many females interested in precision machining, welding, casting metals, ie heavy industrial work that is dirty, hazardous and dangerous.
@@shagrov1 а тут работа на станке сто летней давности и измерение сто летними методами и инструментами + все одним резцом. Вот это и восхищает. Чпу это пшик, а ручная работа это самая суть нашего дела.
Extreme skill ! If you had the means of Western countries, you would do even better. But it is the genius of your workers that is the best. I wish you good health and great... great financial health. Good luck. (Algerian)
It's great to see something productive without the restrictions of Aerospace/Nadcap, Brilliant work
My thanks, from Canada.
at 17 minutes no keyway, then they spin it at 18 minutes and magically there what looks to be four or more 4" x 20" keyways. Would have like to see how that was done....
good job brothers🇵🇰 pakistan from 🇸🇴 somalia insha alaaah
Darn- I was waiting for them to load it on one of those 3 wheel scooter trucks.
Instead, a lorry with bald tyres!
That’s funny
Thats just a big three wheel scooter. Pulled by four donkeys that were ready to go.
Guys you are doing a good job with limited amount of resources; I guess the life must be cheap in Pakistan as safety gear is non existent - machinist working without safety glasses!!!!!!!!! Loose your eye and the owner gets a new worker - cheap.
Greetings from Turkey to my Pakistani brothers.
Me too from Egypt to my pakstani brothers
اليوم فهمت كيف صنع هؤلاء الناس القنبلة النووية رغم فقرهم. !
A steady rest or maybe even two might be useful for the usual reasons.
Yea....I was feeling bad for that live center.
This is probably the cleanest machine shop I’ve seen from India! And organized!
Haa
Beat guess is India but not necessarily.
These are brilliant people. I am fond of watching such videos whenever I get time. They only need support of government to produce wonderful things.
what machine is that for, this is huge
At least these guys look like they take care of their equipment, most of the places are outdoors in the dirt and the equipment isn't taken care of very well.
Brilliant n magical. When they turned the shaft around, suddenly, there were 2 key slots already machined off. So magical.
You’re being a little sarcastic here methinks!? Right tho! Amazing is an overstatement, but they do well when you consider the infrastructure and open air conditions! Cheers
@@nigelparker5886 1
@@atticuspip1481finding faults in videos and criticising them.
big lathe, good work!
Chao may ban nhe thanks ky thuat cua ban con tho so qua thanks nhin thay cau nang nguy hiểm quá
The keyway is automatically generated, which is awesome!
English is horrible!
lol
Classified manufacturing process.😄
Amazing how they got that square with a 4 jaw chuck. That's some skill!!
Beautiful machining. Enjoyed this video
I really enjoy this really heavy work, thanks!
I think this shop has the only Live Center in all of PK
Rolling dead center
The joke is great.....thats my thing!
It's dead.....see the end...welded in
Exlentent job paji
why not use the coolant love from EAST PUNJAB🇮🇳 INDIA❤❤❤thank you for your upload videos🙏🙏🙏
Colent use for grinding
Impressive skill…..Quite amazing👏💪
impressionnant 💪👍👍
I love these videos! Nothing is impossible. 💪💪👍👍
Một trục kim loại to lớn có chất liệu thép rất cao, để tiện được thành sản phẩm giá trị cao, thật sự là một thách thức trí tuệ,qua biểu tượng nâng niêu của các bạn cuối cùng bóng sáng,cho thấy các bạn phân kim rất giỏi và rất thông minh, đó mới là trí tuệ ánh sáng, cảm ơn video chia sẻ của bạn rất hay và ý nghĩa, chúc các bạn sức khỏe hạnh phúc thành công.
I could watch those lathes peel metal all day.
Olá amigo!! Aonde será usado essa peça?????
Great stuff regardless of the so called professional comments.....good work guys
It is a splendid show!
You guys are amazing ! Great work of art !
Salam to the hardworking Pakistanis, look the working place , no safety
How much cast would it be to refine such a huge saft?
Skills of man those are limitless
i have seen live centers made with the abilites and craftman ship why do you run without one
ENJOYED THAT LADS , WELL DONE!👍
I am amazed that the lathe bearings handle the weight. Steel is amazing material.
I would be interested in a video that starts from mining the rocks , raw material , to the finished product. That would be cool to see.
Raw. Material comes from russia china
@@GamingStarslegends01 Do you know if there is a video that shows from the mining of the stones (raw material) to the finished product? It would be interesting to see from stone to steel (or whatever metal) product.
In this case and that goes for many steel products in Pakistan, it's mostly salvaged parts from oceangoing freighters/ cruiseschips etc. It says in the title something about a shaft from a ship so that would be the propellorshaft. So then you would have to back to the late '70's or the '80's to first see the ore being mined for this shaft, then being forged and hammered in (probably) a European shipyard and conclusively turned on an even bigger lathe then this😅. Then after 30/40 years sailing across the world the ship's a write off; gets beached on the Pakistani beach and scrapped. And there you have your shaft here in this movie...
If I had such a gadget production factory, I would be rich from Elon Musk 😅
Amazing what can be done ….quite scary
I'm worried about the CHAIN to carry a15 ton of metal roller😱
yeah, it doesnt look like the chain is large enough to carry such an immensely heavy object...it also depends on the grade the chain has, if it is grade 100 or 120 , of course it will hold much heavier objects than a ordinary grade 80 chain, but if i had to guess, the Indians dont get to use such high grade chains due to the cost, a grade 120 chain, is just much much more expensive than 80 grade....to be able to lift a 15 ton object, i think at least the chain dia should be more than 16mm , preferable 20mm or more...its hard to tell wht diam., chain theyre using here....
Scares me
from where we can get these shaft?
I bet Curtis would be impressed.
No…the boy would have used a collar around that to support it instead of using timbers
بسیار بسیار عالی جدآ لذت بردم با این ماشین تراش یک چنین شفت کشتی را درست میسازند کار یک ماشین پرفشار را با یک تراس قدیمی و معمولی .
I often would stack 1 inch carbide cutters when ruffing out pieces like these and spend the day on a grain shovel shoveling chips. Ahh, the good old days eh.
I hope that they will install this shaft in the car and it will never break
"In a car"..... what kind of car is that??? An Abrams tank?
exselente labor por favor graven todo el video el final en donde colocaron esa enorme pieza y para que muchas gracias muy profesional mi respecto
Por lo regular esas enormes piezas son para la industria minera, o barcos, saludos cordiales atte Jesús Gómez torreón coahuila México
How many days it tooks🤔🤔
작업복이 사고나기 딱 좋은 옷 입니다.
특히 선반 작업은 옷을 깔끔하게 입어야 합니다.
옷자락이 감기면 즉사 하기 때문이죠..
What was the total time for this piece to be finished it must of been a week
Months would be my guess as it rusted a few times in the making, and we never seen the milling part.
@@thepubliceye I think that the roof is full of holes as you can see that it's probably raining inside, you can clearly see the water splash on the part.
They are making ROCKET'S CASING. .
Where in this, is the piece of material, shown in the thumbnail? More clickbait.
I was waiting to see the slot milling!
Mesmerizing ❤
I hope people watching this will understand the cost of the steel material alone that the shop owner has invested in this part. Plus many hours of labor to have it machined correctly. It only take one wrong cut by the machinist to make this into a huge piece of scrap metal. Then the shop owner has to replace the steel and start machine work over again. If this was a 15 ton part to start with in the US thats around $30k or more worth of steel. More if its an alloy. This looked like mild steel forging.
Amazing, good job
Heavy and semi heavy engineering is now becoming very prevalent in Pakistan
The great thing is that it is being driven primarily by the private sector
by george you do have a live center
Can only laugh these nimrods. First thing we're taught in a machinist workshop is you NEVER wear long sleeves or loose clothing
they must be very lucky that no accident has occurred it is very heavy, the axle should have had other bases and I should have taken safety measures
Excellent,but I dont belive that shaft smooth due to the slag in the middle which is supported by means of woods.Again good job.
How many man hours would there be in that project
Quanta produtividade!!!!....
A FERRAMENTA COME BONITO O AÇO , É RELAXANTE DE SE VER
молодцы, будет турбина для южного потока,
это очень низкоуглеродистая сталь для чего он (вал) нужен? На месте газореза не прикалился!
En dat allemaal op Engels machinebouw 😅😊🎉
Amazing skills
Do you mean 15 Tons. Metric I suppose. Dictionary available ? Spell check on Computer ?
جزاک اللہ
Did not see them cut key ways in
Kind of spoils the vid, showing the finished product first.
I bet they make the shaft first and then the ship to fit it.
That job must have taken weeks to complete.
Sorry boss I forgot I was holding the tape on one foot so i could be more,accurate.
good job
Excelente trabajo amigos saludos de Torreón Coahuila mexico 👍👍
Hola Rodrigo que TAL amigo?
Pues dar un gran salud a todos Los amigos mexicanos, de Algeria,
Wonderful
This day innovation and people “who now how to “ will prevail
BU PARÇA NE İÇİN YAPILDI,NE İŞE YARAR TÜRKİYE DEN SELAMLAR
I hope they secured it before driving away!
These are Irish workers in the milling workshop in Youghal County Cork Ireland 🇮🇪. As you can see they have full Health and Safety protection. Half of the staff must be Females for a neutral gender balance.
Your comment said this work is done in Ireland, these men look and dress like middle Eastern, or Pakistan. I very dought that Ireland would have industrial working with such lacking safety rules.
@@jeromemuller962 Hi Jerome. Thanks for your reply. You are 1,000 % correct. In Ireland they would all be put in Jail because of the many many breaches of the Health & Safety at Work Acts.
@@taphhedrof1045 so your comment was a touge and cheek. Half of staff must be female, here in the USA, you don't find many females interested in precision machining, welding, casting metals, ie heavy industrial work that is dirty, hazardous and dangerous.
Pakistani zidabad❤❤
As long as it looks good right...
Donde están los elementos de protección personal, trabajadores: muy buenos, empresa: horrible, falta líquido de corte,
Откуда они взяли такую болванку?
Красивая штука получилась.
А для чего она?
Корабельный вал.
@@user-rd1xd7rh1w корабельный вал был, или его сделали?
You are not allowed to call the shaft a SHE. You must refer to it as THEY.
I love 💘 💗
Excelente work😉
Great workmen
not 1 pair of safety glasses in sight?????
Where are the safety glasses! And what’s with the loose clothing? Jeez.
Show💯💯👏👏🇧🇷🇧🇷
👍 machinists
Lesson in how to strip bolts!
Safety? No eye protection, no safety boots, shirts and clothes lose fitting can get snagged and person(s) pulled into the turning works,
canını çöpte mi buldun
No shortage of labor there.
Next video, on the shop/s Safety for the tradespeople.
Fingers, eyes, toes seem to be intact. My guess is that they pay attention to their surroundings.
Got too love the high paying yellers, Their Job is too YELL
Шикарная железяка, молодцы ребята! А почему не показали как пазы делали?
Этот вал и так точили несколько дней. Не все успели заснять.
@@ruslans8033 Вот так всегда, на самом интересном месте... (с)
Ну не знаю, ребята на видео конечно прикольные, но восхищаться чёт не получается. Россия уже 60 лет газовые центрифуги делает, а тут чего?
@@shagrov1 а тут работа на станке сто летней давности и измерение сто летними методами и инструментами + все одним резцом. Вот это и восхищает. Чпу это пшик, а ручная работа это самая суть нашего дела.
Пазы - это закрытые технологии, а у нас допуска нет....
How do they cut the metal, using no lubricating oil? How do the cutting blades stay sharp and cool enough?
Carbide cutting tips.