Nice vid. Assuming a BT scar won't fit inside the front so it'd need a significantly longer barrel? Not a fan of the worker scars and it'd need something better if it was going to be accurate at 300fps.
The integral scar needs to be 3/4" / 19mm or smaller in diameter to fit. Worker scars, HSF Slurpee and Thanh Slurpee scars have all be tested and fit well.
if i wer to ask for a rapid strike with a black painting with blue fire starting at the front of the barrel going to the end of the jam dor y fang revamped motors with a proformens upgrade fly whells y normal mods to the blaster what wuld it cost
What have you done to improve durability of the catch 2 piece? Anytime I've tried to run a heavier springload in mine, the catch wears out super fast. Are you printing it in PETG?
![[REVIEW] LYNX by Orion Blasters (A 3-D printed Bullpup Powerhouse!)](http://i.ytimg.com/vi/y2YLtGR5Wek/mqdefault.jpg)
its so cool to see this hobby evolve over the last 15 years, we used to think crossbows and doomsayers was the pinnacle of evolution
I still have a RFS I need to do something with
@@ValTek_Armory I did a plunger tube expansion on mine back in the day, just gotta get a metal trigger for high loads
I think Northeast Designs is working on a kit
Rear facing plunger tubes are the new hotness! I'm curious to see that dartpulling system close up.
The way this blaster works is crazy cool!
Love your videos Valour!
Thanks Valour for the great video!
Glad you liked it!
Glad you covered it my friend
Silver fox industries doin' gods work out here
He has good color choices and great print quality. I printed this myself
@@ValTek_Armory for the printer-less consumer (me) their quality and price point is a blessing
Great video of a phenomenal blaster!
What is the longest barrel allowed from the volume of the cylinder? What spring you can use for 300+fps? Thanks!
There are a lot of variables with this. I used an 18kg turf Longshot spring with an extra right barrel for my high powered one
If I wasn’t currently building a TCB I’d be all over this. Excellent work as always Valour.
i'd have to make some shrouds to cover the bars on the TCB-U
Great video.Sick. I likes it I likes it allot. Keep up the great work man I appreciate it
Awesome blaster! I’ll look for pictures of yours on social media.
is there any thumbhole stocks that use the mounting of the normal airsoft type handles?
not to my knowledge
Yep, if your going to buy this thing you should look up Silverfox!
Still get the 3D prints from Silverfox, there quality is even higher then other very well-known sellers
worker makes even a 22kg spring for the longshot. i got it in my lynx. it hits like a truck!
Worker springs are okay, but they wear out too fast for my liking
Where do you get the springer sticker?
foamfreaks had them for a while
I cant wait to get a 3-d printer now
Does it need to have a rubber plunger head cover on it? I don’t want to break mine .
These have an airbrake built into the plunger
If you print this on a ender 5 pro would you us supports
I don't think any part needs support regardless of printer
Theres a version 2 already? They just did ordering for the first one.
That is the v2 that you'll be getting
Nice, and did not know about the thumb mag release, that is actually a huge deal for me lol also how long is this thing anything?
shorter than a longshot base blaster
21.5" not including however much the scar or barrel sticks out the end (in the case of Valour's lynx, none)
Gosh. I remember when my xbow was a competitive high end primary.
3d printing has really given the hobby a leg up
Got a link to the foregrip on the V2?
i'll have to go digging
Nice vid. Assuming a BT scar won't fit inside the front so it'd need a significantly longer barrel? Not a fan of the worker scars and it'd need something better if it was going to be accurate at 300fps.
The integral scar needs to be 3/4" / 19mm or smaller in diameter to fit. Worker scars, HSF Slurpee and Thanh Slurpee scars have all be tested and fit well.
@@orionblasters6342 Cheers. I could use one of Spectre's aluminium ones then.
How did you get the stl files
Nvm I found them
i have a question about comisions
if i wer to ask for a rapid strike with a black painting with blue fire starting at the front of the barrel going to the end of the jam dor y fang revamped motors with a proformens upgrade fly whells y normal mods to the blaster what wuld it cost
Best to drop me an email. It is on the about section of my page
So glad I ordered from SFI before it was sold out
you'll love it!
@@ValTek_Armory I fell in love with it last Ragnaroctoberfest. Where I was fortunate enough to try the v1 😁
awesome!
Are you doin commissions? I would love one of theses by valtek...
I do, but hardware kits are not easy to get right now. Dan will resume selling hardware after he's done moving
@@ValTek_Armory keep me in mind when hardware is more available. Love ur work and ur channel. Thank you... 🎯
I can be reached at my business email found in the About section of my channel
Can we have the thingiverse link for the grip?
Can I hit 300fps without barrel change
You'll need either a longer or tighter barrel to hit 300
@@ValTek_Armory such as the aluminium one on silver fox website. What’s the highest I can get it with just the 18.5 kg?
Can i get this fully built?
SilverFox is your man
@@ValTek_Armory on etsy
Very attractive platform!
it is great!
Sweetness
Hey, where can I download the files so I can print them myself?
he'll likely put them on thingiverse or host them on his own site
Thanks, can't wait for the hardware kit to be back in stock. I'll be placing an order than.
Very cool, 300 fps is just to much... most of my local games are 110fps max
Yeah, I need to nerf this to use it for competitive play
I look at 110fps and think "that's too low for a sidearm". Completely different game type though.
no dislikes
Wow🤦♂️
300fps is fuckin nuts
This was less of a review, more of you talking about your build.
What have you done to improve durability of the catch 2 piece? Anytime I've tried to run a heavier springload in mine, the catch wears out super fast. Are you printing it in PETG?
I printed the catch parts in PLA. I use 4 perimeters and print catch components solid
@@ValTek_Armory I figured it out thanks for the insight. Jacked up the perimeters and now I have a worker 22kg catching reliably.
Where u get the springer sticker
got it from foamfreaks at ragfest. I had a few