I'm soooo glad to see that EXPERT machinist are on deck. Can you imagine if they were just apprentices, WOW. Everything was machined to the 1/10th of an inch, the Snap-On calipers and micrometers were evident in the vid. The high amperage Lincoln 1000 series can be seeing from the super-duper cable bringing current to stick welding. In addition: the absolute usage of PPE's such as one-hand autonomous welding mask, open-toes steel sandals, Miller welding gloves, grinding goggles (squinter style) breathing mask to repel grinding rust, just to name a few. Good job boys!
What a plonker you are. These men achieve marvellous results with the most basic equipment and tools and all credit to them for doing so. Maybe you'd like to buy them a modern computer controlled lathe and some nice new tools andvthen judge their skills? They can achieve far more and quicker then most Western workshops and at a fraction of the cost. Judge by what you see not by what other wealthier countries can do with vastly superior workshop facilities.
As a retired tool-and-die Machinist I'm impressed without true that got this piece to run on such a primitive piece of machinery piece of Machinery looks about 1890 British to me
I'm surprised that the crusher wasn't assembled on site, but at the foundry. It would have been interesting to see it loaded and transported to it's work site. It was good to see a machinist smiling (the guy in the red hat😀)
Fascinating what these guys get done in these working conditions. Some of these shops are way better than others. It’s fricking crazy. So much is done outside and in the dirt.
Pakistan. The guys probably get $50 a week. No money for improvements so they make do as best they can. Westerners sneer at them but probbaly couldn't do the work.
To anyone making predictable comments about safety, please be quiet - men are working here.
I'm soooo glad to see that EXPERT machinist are on deck. Can you imagine if they were just apprentices, WOW. Everything was machined to the 1/10th of an inch, the Snap-On calipers and micrometers were evident in the vid. The high amperage Lincoln 1000 series can be seeing from the super-duper cable bringing current to stick welding. In addition: the absolute usage of PPE's such as one-hand autonomous welding mask, open-toes steel sandals, Miller welding gloves, grinding goggles (squinter style) breathing mask to repel grinding rust, just to name a few. Good job boys!
nov nov nuuu;;;;
What a plonker you are.
These men achieve marvellous results with the most basic equipment and tools and all credit to them for doing so.
Maybe you'd like to buy them a modern computer controlled lathe and some nice new tools andvthen judge their skills?
They can achieve far more and quicker then most Western workshops and at a fraction of the cost.
Judge by what you see not by what other wealthier countries can do with vastly superior workshop facilities.
Open toe steel sandals. Is that joke? I didn't see any PPE. What a liar.
You mean everything was machined to 2,54mm
@@Sam-ob4of Absolute🤣 precision work. Have a great day
I'm amazed about the lathe holding that heavy metal cylinder
А абразивная пыль на направляющих? Полный пиздец?
Fitting that heavy steel drum to the lathe machine was awesome!
Мужики на таком рванье умудряются работать. Уважуха.
В наших колхозах вообще без станков умудряются восстанавливать.
@@Cyclone_IV Колхоз - это коллективное хозяйство. Где ты сейчас этот пережиток прошлого увидел? 😁
As a retired tool-and-die Machinist I'm impressed without true that got this piece to run on such a primitive piece of machinery piece of Machinery looks about 1890 British to me
Takes me back 60 years.
POUCOS RECURSOS, POUCAS FERRAMENTAS, MAS A CRIATIVIDADE SUPERA TUDO ISSO, TORNEIRO RAIZ... TUDO NA RAÇA, PARABENS...
I'm surprised that the crusher wasn't assembled on site, but at the foundry. It would have been interesting to see it loaded and transported to it's work site. It was good to see a machinist smiling (the guy in the red hat😀)
Fascinating what these guys get done in these working conditions. Some of these shops are way better than others. It’s fricking crazy. So much is done outside and in the dirt.
Им бы еще и станки с продольной и поперечной автоподачей , а то руками крутить долго !
И не говори!
78yr old American mining mechanic. Total administration for these tradesmen under adverse conditions.
No matter how carefull, skillfull and accurate they fabricate the parts , first step is throw it in the dirt or give him a whack with the hammer !
песчаная буря самое время работы на открытом воздухе
It's good to see there's plenty of PPE (personel protective equipment) around there, must be health and safety's day off today 🤣🤣
That's why machinist is the most important in the world
Profissionalismo tem muito bom só está faltando E P Is, mesmo assim meus parabéns pelo trabalho bonito que fazem,
People have been working with heavy parts for many years and there is not a single lifting device, hoist above the machines. Laziness?
Барабан в конце другой ставили,он гладкий был в начале а в конце уже с зубьями 🤣🤣
Amazing!
Что, даже крыши нету? Дожди раз в год идут что-ли?
Пакистан в основном пустыня и полупустыни, там действительно редко бывает дождь
Точная точность - всё на глаз и на ощупь 😂
Этот токарный станок участвовал в постройке "Форт Стикин" ?
yeah I'm impressed. I had to hold tolerances to .003 in.
crazy work
That's nice machine
👍🌹🇩🇿 تابع
Кувалдой, со всей дури! Как эти станки, времён английского колониального ига, терпят?
Это современные станки. бюджетный вариант. Стоят около 4к зелени
@@user-uy8fo2dg9r дай ссылку?
можно сказать что они донашивают остатки высокоразвитой цивилизации
@@user-lw6qp2ep4v Сам погугли товарищ. К Нам в пту закупили таких по 4кзелени. аналоги китай полноценные, стоили по 7800.
времён английского колониального ига,- потому и терпят
Need a pair safety glass for the operator, at least.
Ya Kon c jaga ha bhai city name please
Я вижу что , там чут ли ни каждый сварщик.😅
Holy COW-OSHA.
May i ask you where is this place
Pakistan. The guys probably get $50 a week.
No money for improvements so they make do as best they can.
Westerners sneer at them but probbaly couldn't do the work.
Pakistan
小心危險安全第一。
Hell is ain`t a bad place to be !
👍
Ну теперь расскажите им про дип500 и про УЦИ 😂
👍🏻👍🏻👍🏻
Not one safety regulation in force here. No one sells steel toe sandals either...
boladi
well l am do it wass worked tumpa run
BY HECOUNSAA ARRIA HISKA NAM PLASE KA PATA DALETO HINKA ARDAR HOUR COBADEDA
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏
พวกแขก รุ่มล่าม
Эл сварщик сидит как орёл на горной вершине!??¡
unfinished work
Expert machinist🤣
They got the job done.
ТОЧНОСТЬ ВЕЖЛИВОСТЬ КОРОЛЕЙ )) НУ И КАК БЫ ЩАС Я СОВСЕМ НЕ О НИХ 😜👍☝️тех что на видео ))
Здравствуйте это Пакистан