Thank you so much for this. I wanted one for Christmas and got it. I have a homeless ministry that I really wanted the sound to be more than it was for them.
The effects (LED number 1 - 16) is not "proportionate up the scale" as stated in the video. The LED number indicates the 16 different digital effects supported in the mixer (4 reverbs, 1 reverb combined with delay, and 11 different delays): 01 HALL1 02 HALL2 03 ROOM1 04 ROOM2 05 REVERB+DELAY 06 125MS DELAY 07 175MS DELAY 08 225MS DELAY 09 285MS DELAY 10 560MS DELAY 11 860MS DELAY 12 1000MS DELAY 13 1400MS DELAY 14 800MS PINGPONG DELAY 15 1000MS PINGPONG DELAY 16 1400MS PINGPONG DELAY
Thank you so much for this! I have been looking online to see which number corresponds with which effect and I came up with nothing. Which of these do you think would be the best for karaoke?
Something of note... When I purchased this unit I could have sworn that it said it could run off of USB power. It cannot. If plugged in only via USB the top half of the unit will function and you will be able to pair via BlueTooth, but there will be no sound output. You MUST connect the main power supply. Also I found that there's a significant amount of latency (~30-50ms) when using the bluetooth option. This may be fine if you are just streaming audio from a device, but for live performance you will need to plug in directly with a cable. I expect a bit of latency from using BlueTooth but this seems excessive. I was hoping to use MIDI Device -> PC for sound processing -> Mixer via BT -> Audio Out and cut out a cable, but the latency is just too high. I'm an audio hardware nubbin' so some of this may be obvious or expected from folks in the industry, but it was not obvious to me. Hope this information is helpful to someone.
I realize that I cannot record if I use 3/4 or USB for music input. So I have to connect one of the karaoke music input to Line 2 for Mic. Is there a quality difference of reception if I use mic input to feed musical instruments?
Great video! Bought this, setting up first time. I am using this for zoom Karaoke. I want to mix my music from a phone, and mic together to get right balance. I bought what was suggested by Amazon, so my phone plugs to main out left and main out right in the mixer and mic is plugged in. The phone plugs is to hear? Any suggestion for zoom Karaoke with this board?
Thanks for this video. Very helpful. I just purchased one from Amazon which will arrive Monday. Question if you don't mind; the purpose will be to plug in a keyboard with output to sound system so I can do some recording on the installed mp3. My keyboard is stereo; if I connect it to Ch1 and 2, from the keyboard's L&R output, will it come out the same way; Ch1 to output 1 and Ch2 to output so the stereo will work? Thanks for your time and feedback. Appreciate it.
hello... i have searching for a tutorial on how to use this system... your video came the closest to the complete set up... i am talking about how to get the sound to come out of speakers or head phones...i have this exact unit...i have my mic connected vis XLR...USB hooked up to y laptop... head phone plugged into the unit... & all powered up via the power supply included in the package... what am i doing wrong ??? questions that i are do i need to have powered speakers?? what does plugging in the PC do???how does this system connect with OBS??? vinny
Hi, I'm looking for an audio mixer to do voice recordings. I've seen some more basic mixers, the ones with colorful lights, ha, that have a 'de-noise' control to keep backgrounds noises out. Can this Pyle also be adjusted similarly? Thanks
I play live acoustic gigs and am trying to use the control out for monitors, but it clips SO bad... any quick suggestions to correct that on this mixer?
@@expertisland all through the usb interface or main out into sound card ? I should have clarified sorry! Also what’s your opinion on the built in interface combo ? Is this good enough or should I route mixer into a separate interface, then interface into pc ?
I have a question. I have Yamaha RX-V385 receiver. Can I connect this mixer to my receiver and use for karaoke music? If you can reply this question it is highly appreciated. Thank you!
Thanks for the video, however I was really hoping to try and figure out how to make the audio out from both microphones go to mono or both right and left. The only way I can make it work now is to plug the output 1/4 cable into ether the right or left and I lose the other channel.
Could this unit power two Peavey sp 2a speakers for just a 3 piece band maybe even one speaker?? I just got these speakers from my father. There all original and work amazingly. And just wanna find a nice unit to power them. Thanks
Could I use this mixer to bring audio from two sources (PC and Xbox) into one pair of headphones at the same time ("splice two audios and send to headphones)?
yes you can BUT xbox has software that automatically cancels out distortion. well it trys to. you could recieve audio from the tv audio out using adapters the red n white cord to 1/4''. plug it right into channel 1. than u can send you mic audio from another pair of headphones connected to your controller
make sure you turn on the power switch on the back. the red power light will then go on. *NOTE if you plug it in to the computer the lcd display on top will turn on but the mix will not work till you turn on the switch in the back.*
I connected my PMXU43BT to my computer USB to USB but when ever I connected the mixer it begins to messed up with the volume of my pc, the volume begins to go up by itself what can I do?
Hello sir✌️ Great video. I'm new to mixing boards and i have an idea but I don't know if is possible. I have a pair of Edifier s3000pro powered speakers with xlr balance inputs and I'm buying a pair of Kali in 8 powered monitors. My question is can I use a mixer board to make them play at the same time for my tv or streaming devices without breaking them? I would like to use my 2 different pairs of powered speakers as my home theater and music set up and listen to them at the same time. If this is possible can you recommend a board that would sound great and won't break the bank. I thank you in advanced sir. English is not main language so I hope I'm making myself coherent enough. 🙂✌️
dumb newbie here, can i run 2 wireless mics, and up to 2 guitars on the 4 channels? then connect this to home receiver and speakers? and is there any differences with model pmxu43bt.5?
I'm a singer and I purchase this mixer. I do online singing using Streamyard Online Service. I noticed that when I use the bluetooth, I'm still not hearing the music from my Iphone in streamyard service. I only hear my voice when I check the video. What I'm I doing wrong? I need help with the right setup.
My question is pretty simple, I have a small 10x10 studio at home where I do most of my online workshops as well as review and how-to videos. My walls are covered (mostly), table top is covered, and my floor is carpeted, but I still get quite a bit of echo from the ceiling is my guess. It’s pretty easy to remove the echo in post, but during my workshops I don’t edit and repost, so I’d like to be able to sweeten the audio before going into it in the cameras onboard audio interface/preamp. I’m wondering if this mixer (or something else) will help me sweeten the audio just a little bit more before going in camera. I have no problem with the levels, it’s just trying to remove some echo/room noise, maybe adjust bass or trouble a little bit. This would also save me quite a bit of time in post production. I’m not sure if there is a specific device for this would be. Strangely enough I’m having difficulty finding what the “gear” is that I need to actually do this. I hope this makes sense? I use either a Sennheiser MKE600 and/or Ride Go II w/ Rode Lav II lavs for audio into a Canon XA40. Thank you for your time!
Yes it does work on a Mac I have an iMac mid 2011 and I have a Teyun mixer as my interface and it work very well I was surprised 🙀😯 right now I'm running two subwoofer PC speaker powered with two speakers on each subwoofer to my main outs with a y cable 3.5 back to the computer and one to connect up the other subwoofer and the other subwoofers plugged directly into the to the other main speaker and I have stereo I can do stereo recordings actually it works and sounds very good plan on getting speakers and upgrading eventually but for right now I'm on a tight very tight budget so it works I'm not going to complain about it but I thought I'd share and you need phantom power to use and effects processor or a or to plug your guitar straight in you need phantom power or di box which I don't have so I make do with what I have hope this helps somebody
🌴 I have seen this before & Fixed the Problem, the Last time we learned the mixer will get power to run the mixer from the USB if plugged into a computer. But not power up the Digital media display Make Sure the Power switch is turned on in the back, even if the mixer looks on check the Switch. Hope tis helps.
Anyone have any idea to why my PC can detect my microphone plugged into this board without any issue but can not detect the board as an output device making me unable to route audio?
@@expertisland I was trying to get sound out of my Bose Sub2 paired with S1 and could not figure it out. This comment saved me. BT into the Pyle, 1/4” to XLR via SEND to sub2 line in, line out to S1 via XLR. Use the send knobs and channel 3 and you’re good to go!! Thanks!!!
Thank you so much for this. I wanted one for Christmas and got it. I have a homeless ministry that I really wanted the sound to be more than it was for them.
The effects (LED number 1 - 16) is not "proportionate up the scale" as stated in the video. The LED number indicates the 16 different digital effects supported in the mixer (4 reverbs, 1 reverb combined with delay, and 11 different delays):
01 HALL1
02 HALL2
03 ROOM1
04 ROOM2
05 REVERB+DELAY
06 125MS DELAY
07 175MS DELAY
08 225MS DELAY
09 285MS DELAY
10 560MS DELAY
11 860MS DELAY
12 1000MS DELAY
13 1400MS DELAY
14 800MS PINGPONG DELAY
15 1000MS PINGPONG DELAY
16 1400MS PINGPONG DELAY
Thank you so much for this! I have been looking online to see which number corresponds with which effect and I came up with nothing. Which of these do you think would be the best for karaoke?
@@djkevinkelly I would recommend # 01, 02, or 05.
Something of note... When I purchased this unit I could have sworn that it said it could run off of USB power. It cannot. If plugged in only via USB the top half of the unit will function and you will be able to pair via BlueTooth, but there will be no sound output. You MUST connect the main power supply.
Also I found that there's a significant amount of latency (~30-50ms) when using the bluetooth option. This may be fine if you are just streaming audio from a device, but for live performance you will need to plug in directly with a cable. I expect a bit of latency from using BlueTooth but this seems excessive. I was hoping to use MIDI Device -> PC for sound processing -> Mixer via BT -> Audio Out and cut out a cable, but the latency is just too high.
I'm an audio hardware nubbin' so some of this may be obvious or expected from folks in the industry, but it was not obvious to me. Hope this information is helpful to someone.
im having hte same delays even connected by USB. its extremely annoying. any ideas from anyone how to fix it. if I can;t the machine is useless to me
I realize that I cannot record if I use 3/4 or USB for music input. So I have to connect one of the karaoke music input to Line 2 for Mic. Is there a quality difference of reception if I use mic input to feed musical instruments?
Great video. When I plug in to this mixer I get this hissing sound. Any idea what might cause that? I have a cloud lifted+XLR mic rode podmic
Great video. If I were to connect 2 speakers, what 2 slots I would use with this mixer?
Great video! Bought this, setting up first time. I am using this for zoom Karaoke. I want to mix my music from a phone, and mic together to get right balance. I bought what was suggested by Amazon, so my phone plugs to main out left and main out right in the mixer and mic is plugged in.
The phone plugs is to hear? Any suggestion for zoom Karaoke with this board?
Is the usb an input !?
As in can I plug in my iPhone and have a Bluetooth connected and mix the pair !??
Thanks for this video. Very helpful. I just purchased one from Amazon which will arrive Monday. Question if you don't mind; the purpose will be to plug in a keyboard with output to sound system so I can do some recording on the installed mp3. My keyboard is stereo; if I connect it to Ch1 and 2, from the keyboard's L&R output, will it come out the same way; Ch1 to output 1 and Ch2 to output so the stereo will work? Thanks for your time and feedback. Appreciate it.
hello... i have searching for a tutorial on how to use this system... your video came the closest to the complete set up... i am talking about how to get the sound to come out of speakers or head phones...i have this exact unit...i have my mic connected vis XLR...USB hooked up to y laptop... head phone plugged into the unit... & all powered up via the power supply included in the package... what am i doing wrong ??? questions that i are do i need to have powered speakers?? what does plugging in the PC do???how does this system connect with OBS??? vinny
Hi, I'm looking for an audio mixer to do voice recordings. I've seen some more basic mixers, the ones with colorful lights, ha, that have a 'de-noise' control to keep backgrounds noises out. Can this Pyle also be adjusted similarly? Thanks
REALLY GOOD REVIEW AND EXPLANATIONS!!! Many thanks!!!
I play live acoustic gigs and am trying to use the control out for monitors, but it clips SO bad... any quick suggestions to correct that on this mixer?
TY for your expert advice and great videos. Def a help for a noob like me!
Im new to audio interfaces. Does this connect to usb to the computer? Im trying to use it for livestreaming
It will work from the mixer to your computer for recording and live stream.
Can you use this to stream on obs on pc just for mics ?
Yes, you can 1 channel in, 2 channels out.
@@expertisland all through the usb interface or main out into sound card ? I should have clarified sorry! Also what’s your opinion on the built in interface combo ? Is this good enough or should I route mixer into a separate interface, then interface into pc ?
does it have a foldover channel and fenten powers
I have a question. I have Yamaha RX-V385 receiver. Can I connect this mixer to my receiver and use for karaoke music?
If you can reply this question it is highly appreciated.
Thank you!
Those the unit comes with fx send or aux send to allow mix minus?
Thanks for the video, however I was really hoping to try and figure out how to make the audio out from both microphones go to mono or both right and left. The only way I can make it work now is to plug the output 1/4 cable into ether the right or left and I lose the other channel.
Could this unit power two Peavey sp 2a speakers for just a 3 piece band maybe even one speaker?? I just got these speakers from my father. There all original and work amazingly. And just wanna find a nice unit to power them. Thanks
Is Bluetooth for sending a signal or receiving a signal?
Thanks!
Hi...Is this bluetooth only...?? OR can I wire it somehow into my android smartphone for v-logging...Thanks...
Could I use this mixer to bring audio from two sources (PC and Xbox) into one pair of headphones at the same time ("splice two audios and send to headphones)?
you should techincally
No, because there is only 1 stereo input. You need 2 stereo inputs.
yes you can BUT xbox has software that automatically cancels out distortion. well it trys to. you could recieve audio from the tv audio out using adapters the red n white cord to 1/4''. plug it right into channel 1. than u can send you mic audio from another pair of headphones connected to your controller
Thinks for usefully video
Thanks!
I connected headphones onto the headphone Slot and Everything is connected to my pc and I cannot hear any Audio
did u try everything he said in the video?
u might have to click on the speakers symbol on the bottom right corner of your pc screen
Are [SEND] and [RETURN] stereo 1/4 jack?
Do you have the list of the Effects on this one.?
Will this output a Mic to a pair of Simmons 2112 amps?
it will connect to your Simmons 2112 and run mics on your system.
could you use a regular pair of head phones or does it have to be the one with the thicker plug
It would have to be 1/4” but you could buy an adapter if you’d like
Are the lights on the Pyle supposed to automatically turn on? I see the green light on the power outlet but none of the lights on the Pyle
make sure you turn on the power switch on the back. the red power light will then go on. *NOTE if you plug it in to the computer the lcd display on top will turn on but the mix will not work till you turn on the switch in the back.*
Can this be used without USB?
How do you connect to laptop? Does it need software driver?
I want to know this also
I connected my PMXU43BT to my computer USB to USB but when ever I connected the mixer it begins to messed up with the volume of my pc, the volume begins to go up by itself what can I do?
Hello sir✌️ Great video. I'm new to mixing boards and i have an idea but I don't know if is possible. I have a pair of Edifier s3000pro powered speakers with xlr balance inputs and I'm buying a pair of Kali in 8 powered monitors. My question is can I use a mixer board to make them play at the same time for my tv or streaming devices without breaking them? I would like to use my 2 different pairs of powered speakers as my home theater and music set up and listen to them at the same time. If this is possible can you recommend a board that would sound great and won't break the bank. I thank you in advanced sir. English is not main language so I hope I'm making myself coherent enough. 🙂✌️
Hello Brother! Question! What kind of software I can use in Windows 10??
dumb newbie here, can i run 2 wireless mics, and up to 2 guitars on the 4 channels? then connect this to home receiver and speakers? and is there any differences with model pmxu43bt.5?
I'm a singer and I purchase this mixer. I do online singing using Streamyard Online Service. I noticed that when I use the bluetooth, I'm still not hearing the music from my Iphone in streamyard service. I only hear my voice when I check the video. What I'm I doing wrong? I need help with the right setup.
the effects dont work on mine? is there something i need to download?
does this have multiple outputs?
Headphone monitor that use in this review please?
Shure SRH240A
Can I pair this with my bluetooth speaker
What about the Bluetooth? You don't have the BT mixer in your video.
Is there an easy way to tell on these units if the 1/4" outputs are balanced or unbalanced? Both?
they are and when you push the cable down the ring connect before it locks the tip.
Good Job
So you can't plug an electric guitar into this without a direct box?
*I Replied to you question in my Q&A Video here is the link **ua-cam.com/video/G5ECEgf_oAY/v-deo.html*
How can I connect one EV ZLX 15 to an alto TS315 subwoofer to the mixer?
My question is pretty simple, I have a small 10x10 studio at home where I do most of my online workshops as well as review and how-to videos. My walls are covered (mostly), table top is covered, and my floor is carpeted, but I still get quite a bit of echo from the ceiling is my guess. It’s pretty easy to remove the echo in post, but during my workshops I don’t edit and repost, so I’d like to be able to sweeten the audio before going into it in the cameras onboard audio interface/preamp.
I’m wondering if this mixer (or something else) will help me sweeten the audio just a little bit more before going in camera. I have no problem with the levels, it’s just trying to remove some echo/room noise, maybe adjust bass or trouble a little bit. This would also save me quite a bit of time in post production. I’m not sure if there is a specific device for this would be.
Strangely enough I’m having difficulty finding what the “gear” is that I need to actually do this. I hope this makes sense?
I use either a Sennheiser MKE600 and/or Ride Go II w/ Rode Lav II lavs for audio into a Canon XA40.
Thank you for your time!
How do you "get rid" of echo in post? Wow!
I can connect a xlr mic right?
Yes
Yes it does work on a Mac I have an iMac mid 2011 and I have a Teyun mixer as my interface and it work very well I was surprised 🙀😯 right now I'm running two subwoofer PC speaker powered with two speakers on each subwoofer to my main outs with a y cable 3.5 back to the computer and one to connect up the other subwoofer and the other subwoofers plugged directly into the to the other main speaker and I have stereo I can do stereo recordings actually it works and sounds very good plan on getting speakers and upgrading eventually but for right now I'm on a tight very tight budget so it works I'm not going to complain about it but I thought I'd share and you need phantom power to use and effects processor or a or to plug your guitar straight in you need phantom power or di box which I don't have so I make do with what I have hope this helps somebody
The USB function never worked for me, the LEDs on it wouldn't even activate. Good thing that wasn't critical to my needs.
🌴 I have seen this before & Fixed the Problem, the Last time we learned the mixer will get power to run the mixer from the USB if plugged into a computer. But not power up the Digital media display Make Sure the Power switch is turned on in the back, even if the mixer looks on check the Switch. Hope tis helps.
👍
Anyone have any idea to why my PC can detect my microphone plugged into this board without any issue but can not detect the board as an output device making me unable to route audio?
Try it on a second computer to test. Normally if the input works the output should as well.
Has anyone been able to successfully play the bluetooth? I have been able to connect my phone, but there's no audio output
push in the button that says 3/4 - USB to hear the Bluetooth
@@expertisland I was trying to get sound out of my Bose Sub2 paired with S1 and could not figure it out. This comment saved me. BT into the Pyle, 1/4” to XLR via SEND to sub2 line in, line out to S1 via XLR. Use the send knobs and channel 3 and you’re good to go!! Thanks!!!
👍♥️🇺🇸
Bro what mine didn’t work
pure advertising he doesn't even plug a speaker into it so you can hear terrible digital noise and hiss and feedback
i would assume everyone doesnt have this issue. i brought the mids down and it sounds fine
Can you run channels 3 and 4 if you have it connected to the computer?