You need to press the black circle and then pull out the material tube. You can Facebook search Entina and follow our homepage and community, where you can contact us anytime. Here is the link to our homepage. facebook.com/OfficialEntina3d
I had the same problem. I ended up getting it out by pressing down on the black ring using both hands and having someone else pull out the tube. Afterwards, when I tried to put the tube back in we couldn't get it all the way back in as far as it had been.
Mines clogged to the max. Piece of crap printer. What does size socket to remove the damn nozzle ? Bought some printer spanner's off eBay and none of the fits :( better off buying easythreed K7 less hassle
Very bad instruction. Disable stepper motors first! If residue is left behind in the heat break with the tube out, next thing you get a heat creep that is unsolvable. Weedo should recall this poorly produced crap. It is bloody dangerous too. The heater cables runninto the Z-axel will cause power shortage on a bad day. Repairs are difficult without any further damage as you have to cut trough tight zip ties everywhere.
Just FYI, it's much easier to remove the tube if you heat the nozzle to 200 BEFORE trying to pull it out.
Thank you, that was exactly what i needed to do
what if we cant get the tubing out? ours is stuck in it
I cannot for the life of me get the tube to release from the nozzle! It is in there tight. Any tips on how to get it out?
You need to press the black circle and then pull out the material tube.
You can Facebook search Entina and follow our homepage and community, where you can contact us anytime.
Here is the link to our homepage.
facebook.com/OfficialEntina3d
I had the same problem. I ended up getting it out by pressing down on the black ring using both hands and having someone else pull out the tube. Afterwards, when I tried to put the tube back in we couldn't get it all the way back in as far as it had been.
Mines clogged to the max. Piece of crap printer. What does size socket to remove the damn nozzle ? Bought some printer spanner's off eBay and none of the fits :( better off buying easythreed K7 less hassle
Very bad instruction. Disable stepper motors first! If residue is left behind in the heat break with the tube out, next thing you get a heat creep that is unsolvable. Weedo should recall this poorly produced crap. It is bloody dangerous too. The heater cables runninto the Z-axel will cause power shortage on a bad day.
Repairs are difficult without any further damage as you have to cut trough tight zip ties everywhere.
Garbage