Two years later, you inspired me to build my own welding table. But it's Will be fully from scrap... Congrats to your amazing project. You won one more follower. Cheers from Brazil.👏👏👏
It is absolutely incredible... There are lots of videos concerning welding and welding tables and stuff like that, but I found this one is the most interesting, detailed and practicle one of all. Thank you, I've got the inspiration needed.
U are extremely talented craftsmen, always puts a smile on my face when you upload a video you have shown how a UA-cam channel should be run, one of the best channels on UA-cam thank you very much for doing what u do.
Having searched and asked to the brink of impropriety for the dimensions of other builder's framework bars, I succeeded eventually. But You made it so much easier here by taking the time to just state it. I´ll even go a little smaller on my dimensions. Thank You!
thanks Greg! These upgrades were a long time coming... so glad to have them up and finished....just in time for some travel trailer projects (steps, tongue box, etc,. )
Excellent upgrades Joe. Part of the advantages of doing it yourself is that you can usually modify to better suit your needs down the line without too much hassle.
I had to get my hubby to watch our video, he's always building something for table to work on, so he watched and he said that awesome! So he wrote everything down, can't guarantee that will happen soon. Thanks sharing, your table is awesome, good job.
I don't usually write comments but it's not the first a saw a video from you and i just want to say that you have great idea et you're video are well made. Thumbs up. You give me good idea to my project.
Great table to begin with and interesting upgrades. The engineering, welds, fit and finish look great from where I'm sitting. The video quality and presentation top notch. With all that said I gotta tell you the first 4 seconds where you are smoking the pipe and mig welding without looking was like a boss.
Very cool. I've watched a dozen or so welding table videos, and this one is definitely the one for me, well thought out and functional. I just need to downsize it a bit for my 2 car garage shop.
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up ua-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
Great job explaining and showing the details on the materials and the dimentions of your build. Your editing skills are killer and keep getting better and better👍 I always enjoy your content and builds. Thank you so much for sharing and as always Keep Building👍
Joe, I will never build a welding table but the video and your ingenuity are a pure joy to watch. My only concern is that Snap On might be a subscriber and they will be selling it for $5000, so keep an eye on them (even if they try to disguise it by painting it red!). Take care and kindest regards from across the pond.
haha... I'd be okay with that Tony! ... assuming they'd be willing to name it the 'Joe' or 'the Homesteadonomics' model or something like that... as well as give me a commission on each sale :D
Oh Boy... Is my husband going to like your channel! Going to share this with him right now. He's retiring in a few years and wants to go back to welding.
I've been following your page for at least a year or two. I recently purchased a miller maxstar 161 and was looking to build a welding table... you have the coolest design for a welding table I've seen yet. Gonna try to build one myself thanks for the inspiration / direction.
Nice job on your welding cart....I couldn't figure out what was the 4 new things you added to it. And your logo looks very nice! You do detailed work.....All the things you build are well made Joe!!!!
Thanks Marc! I'll give you the run down... 1- table holes on top 2- tool cabinet 3- mini plasma table insert 4- front slide out 5 - rubber stops on the leveling feet (haha... very simple one, but still an upgrade ;)
Hey man. You need to put that design into mass production . That is a winning formula right there. .. That shit would retail at 4,000 bucks a unit. all day long.. Maybe more.. Kudos . Your engineering and fabrication skills are awesome.. I hope you get some thing from the time and effort you put into this design and build.. Absolutely world class...
Awesome table, thank you for the share.....any welder needs a solid/level table, and be as versatile as the one you built......I’ve welded in some hitch tube in order to slide in and out vises, grinders, and anything that can be mounted to a 2” tube and slide into a hitch tube, just a share...thank you✌🏻✌🏻
Awesome table Joe! I really like the drawers that are on the hinge! I’m hoping those winds die down so we can see that travel trailer! Great video as always man!
This is such a great build!! You are really very talented with design & fabrication :) The only thing I would add for myself would be a wheel-locking flat-bar against the fixed casters. It could be foot actuated with spring-steel assisted unlock that would keep the table immobile without having to use the screw-levelers.
thanks Gregory! that's actually something that I really want to do as well... the non locking casters are really heavy duty but lack the conveinence of locking ones... I think I got swooned by the cool green color of them...lol
Really a good idea to use that welding table like this instead of making a new one..very good job man..love to see you doing your job perfectly like this..keep it up..
yes, it would be but I'm planning on mounting a vise to a concreted post just off the shop awning so I can really use to crank on stuff if I need. keeping an eye out on CL for good older one :D
Great upgrade you made! I may have some comments, maybe you already figure it out, but I will share them with you. For the clamp maybe you could modify the clamp so you do not need to disassemble it and or use both hands to install it. You could also add some slots where the clamp may get in from the top without need to disassemble or take it into two parts. The idea of the circular hinge for later be able to setup stoppers or 90 degree angles it great! I love it! You may take something in considerations the female part may get stuff or filled with debris with the time. Maybe would be great to open the hole of the hinge all the way through so it never get obstructed or filled.
I just started to follow you and I can't stop watching your videos, you inspired me to build some projects at home, thanks for share your knowlege in the best clarity way possible.
Man my name is mark I'm from Guyana I started watching your project and man your work look solid like a rock you look like someone that I can look up to in building anything knowing that it will be strong you are my inspiration man yeah! Even thou they say that look are deceiving I will take my chances hit me up when you get this I need some strong guidance I love making stuff than buying it
Two years later, you inspired me to build my own welding table. But it's Will be fully from scrap... Congrats to your amazing project. You won one more follower. Cheers from Brazil.👏👏👏
It is absolutely incredible... There are lots of videos concerning welding and welding tables and stuff like that, but I found this one is the most interesting, detailed and practicle one of all. Thank you, I've got the inspiration needed.
Wow! That is some design! It is not only beautiful but 125% functional!! You put a LOT of thought into this build!!
U are extremely talented craftsmen, always puts a smile on my face when you upload a video you have shown how a UA-cam channel should be run, one of the best channels on UA-cam thank you very much for doing what u do.
man those are some really kind words Daniel! I try my best to improve with each one... thank you!!!
Exactly!!
Incredible work mate... RESPECT from Thailand/Tony
Dude.... as far as I'm concerned you are a mechanical genius. Thanks great creation/work.
Thanks! but way too kind...hahah... more of a mechanical trial and error guy until something works... and theres usually a lot of error ;)
Having searched and asked to the brink of impropriety for the dimensions of other builder's framework bars, I succeeded eventually. But You made it so much easier here by taking the time to just state it. I´ll even go a little smaller on my dimensions. Thank You!
SWEET upgrades, now that is a nice welding table!
thanks Greg! These upgrades were a long time coming... so glad to have them up and finished....just in time for some travel trailer projects (steps, tongue box, etc,. )
Best part is now you have a table you can do ALL sorts of things on after you have finished the trailer.
Love your comment about your design "inspiring" people to build their own tables. Thanks you did just that!!Great build!
Excellent upgrades Joe. Part of the advantages of doing it yourself is that you can usually modify to better suit your needs down the line without too much hassle.
Thanks Wayne! that's very true... I'm just excited to have this back in the 'making other things' stage versus making 'it' haha
The amount of features you have built into that table... I'm just in awe! VERY INSPIRATIONAL!
thanks so much Bob! I have had a lot of fun figuring this project out!! it's gotten a ton of use in the past several months!!
Every hobby welder features tables. All tables are clean, brand new, without a single scratch.
When I thought there couldn't possibly be a better work bench, you make it even better. Love your work!
Great job as always. I like the way you think outside the box and how you execute your plan.
Thanks Daniel! but i was thinking about this one while sitting inside the shipping container 'box' so I hope that still counts...lol jk :)
I had to get my hubby to watch our video, he's always building something for table to work on, so he watched and he said that awesome! So he wrote everything down, can't guarantee that will happen soon. Thanks sharing, your table is awesome, good job.
Awesome! It will be a super useful addition... let me know if he has any questions :)
Hi, this happens to me well. My wife used to say same thing. Lol
Congratulations my friend!!!
I admire your works and your skills!!!
May you always be well, I greet you from Greece!!!
I don't usually write comments but it's not the first a saw a video from you and i just want to say that you have great idea et you're video are well made. Thumbs up. You give me good idea to my project.
Great table to begin with and interesting upgrades. The engineering, welds, fit and finish look great from where I'm sitting. The video quality and presentation top notch. With all that said I gotta tell you the first 4 seconds where you are smoking the pipe and mig welding without looking was like a boss.
I used to watching your table welder many times love it. That I thinking for my work shop one day
I do love your self constructions. I also like how multi utilitarian this table is.
Thanks Myles!!
Definitely gonna need to make some plans for this build! Who’s with me?
I'm in.
Same
Pdf file
What’s the price for the material and fabrication? What’s the range ?
I'm in!
You are an AMAZING craftman!! Such quality to all of your work!! God bless!!
thanks so much BG! I appreciate it :)
Very cool. I've watched a dozen or so welding table videos, and this one is definitely the one for me, well thought out and functional. I just need to downsize it a bit for my 2 car garage shop.
Some nice upgrades.....especially the plasma cutting extension! Again, great video.
thanks Brian!!! I really like that one too :D
Best table and video ever!!! Well done!!! Thank you for the parts list.
I bought this for my friend for his birthday as we just moved into a new house and he finally has room for a workshop. The bench was very easy to set up ua-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh They center support is a little difficult to snap in and out of place at first but at least then we know the bench is secure. It was a pleasant surprise when we saw it came with clamps. I apparently missed that in the description. My friend loves the versatility of the bench. Great starter bench for his workshop and easily transportable all over our property. I wish the bench was a little taller but the other features of the bench more than make up for that.
Really like this table. Great workmanship.
Great job explaining and showing the details on the materials and the dimentions of your build. Your editing skills are killer and keep getting better and better👍 I always enjoy your content and builds. Thank you so much for sharing and as always Keep Building👍
Thanks Todd! Yes, I try to get better with each video! this table has really been a nice addition to the shop :)
another great build Joe
thanks Jason! I appreciate that from another multi-interest craftsman!!!
Joe, I will never build a welding table but the video and your ingenuity are a pure joy to watch. My only concern is that Snap On might be a subscriber and they will be selling it for $5000, so keep an eye on them (even if they try to disguise it by painting it red!). Take care and kindest regards from across the pond.
haha... I'd be okay with that Tony! ... assuming they'd be willing to name it the 'Joe' or 'the Homesteadonomics' model or something like that... as well as give me a commission on each sale :D
Great video on the upgrades. I particularly like the hand model section of the video. Pretty much, keep up the awesome work!
haha... I need to start wearing oven mitts for my hands now;) (George costanza..lol)
Oh Boy... Is my husband going to like your channel! Going to share this with him right now. He's retiring in a few years and wants to go back to welding.
Well, I'd be happy to have him watching :D Welding will be a great way to use his time as well as make some useful things for you both!
He might be interested in master welder Jody. I learned a lot from him.
ua-cam.com/channels/qq70AnPkj4-UApS_m_6mPw.html
Good luck to him!
nice little functional shop.
thanks! It's still not finished but coming along little by little :)
Is it almost time to make the shop bigger?? haha
A brilliant concept and an ideal table. The detailed specs at the end are very appreciated. Look forward to your future projects!
Very helpful, I will make one but like you said I will do it to my needs. Thanks you do good work!
Very....very nice welding table...and inspiring me to build that soon
That is killer. Well thought through with all the features. Looking forward to figuring this out.
Really love your welding table. Looks very useful. Well thought out.
Thanks for the video! That table looks great!! I think it's just perfect!! Good work. 😎
I applied your Ikea cabinet to my Northern Tool weld table. Space only allowed for 4 drawers but it works great. Thanks
Thank you for sharing your amazing video Joe, I enjoyed as always. God bless you and your family
Thank you Carsten! God bless you guys too
Sweet table, looks like you have pretty much every use covered.
thanks Mike!!
ok this is getting very nice. I see your uppgrade fixed the only problem i could see. Nice work. Top norch
I've been following your page for at least a year or two. I recently purchased a miller maxstar 161 and was looking to build a welding table... you have the coolest design for a welding table I've seen yet. Gonna try to build one myself thanks for the inspiration / direction.
All of your projects are inspirational! Spot on upgrades. As always, thank you for posting.
thanks for checking it out Afonso!
Nice table, man. Well designed.
I’m inspired.
Nice job on your welding cart....I couldn't figure out what was the 4 new things you added to it. And your logo looks very nice! You do detailed work.....All the things you build are well made Joe!!!!
Thanks Marc! I'll give you the run down...
1- table holes on top
2- tool cabinet
3- mini plasma table insert
4- front slide out
5 - rubber stops on the leveling feet (haha... very simple one, but still an upgrade ;)
Awesome awesome 👏 job Joe !!!
thanks Lebron!!
Great post! Got lots of ideas to complete my welding table. Kudos!
it's a nice multi-purpose table.I congratulate you.
A work of art.
thanks Robert!!!
joe
Hey man. You need to put that design into mass production . That is a winning formula right there. .. That shit would retail at 4,000 bucks a unit. all day long.. Maybe more.. Kudos . Your engineering and fabrication skills are awesome.. I hope you get some thing from the time and effort you put into this design and build.. Absolutely world class...
You are a master craftsman.
haha... no, more like a master of trial and error... with some things that turn out well :D But thank you for the super kind words Tina!!
That is an AWESOME table!
Awesome table, thank you for the share.....any welder needs a solid/level table, and be as versatile as the one you built......I’ve welded in some hitch tube in order to slide in and out vises, grinders, and anything that can be mounted to a 2” tube and slide into a hitch tube, just a share...thank you✌🏻✌🏻
Like always Joe awesome video
thanks Dennis!!
Joe
That's a really cool idea. Also really nice video.
Thanks Joseph!
That's a really neat table!
I am stealing this design and adapting it for woodworking.
It looks fantastic! The finish is great too.
Thanks John! I've been really happy with this table..I use it for soooo much :)
Nice table Joe 👍🏻
thanks you Willie :)
Like the way you've dovetailed your metal saws into the working of the table.
Making good, square cuts is much easier with a larger working surface.
Well I loved the original build, but have blown me away with the up grades 👌.
UA-cam at its best. Good work!
Amazing!!!!! Congratulations my friend !!!!
thanks Panos!
Joe
Awesome table Joe! I really like the drawers that are on the hinge! I’m hoping those winds die down so we can see that travel trailer! Great video as always man!
Thanks Zac! yes, spring time is crazy around here... they cool it down some but it gets old...fast...lol
Один из самых продуманных столов что я видел, однозначно лайк.
Это факт!
a very nice table, use a chipping cleaning fluid, a nice thing will protect the top, greetings from Poland 😉
I just want to know where they make guys like you. Someone won the husband lottery😊 but seriously, your ambition is refreshing!
This is such a great build!! You are really very talented with design & fabrication :)
The only thing I would add for myself would be a wheel-locking flat-bar against the fixed casters.
It could be foot actuated with spring-steel assisted unlock that would keep the table immobile without having to use the screw-levelers.
thanks Gregory! that's actually something that I really want to do as well... the non locking casters are really heavy duty but lack the conveinence of locking ones... I think I got swooned by the cool green color of them...lol
Excellent video, brilliant welding table. Gave me plenty of ideas! Thank you very much!
Really a good idea to use that welding table like this instead of making a new one..very good job man..love to see you doing your job perfectly like this..keep it up..
Thanks so much Sounak! It's been a fun project that's been getting a lot of use recently :D
I loved it, something like that is what I need, thanks for sharing
welding is a skill everyone should know at least a little about it opens a whole new world of diy projects
yes, it does! since I started welding I've enjoyed it so much.... lots more you can do and it last forever (provided its weather proofed ;)
Awsome build!
very nice, beautiful idea
Awesome bench
Amazing!!! We love it!!!
Thanks so much Maria!
Great inspiration! I especially like how your logo turned out off of the plasma cutter (3:42). Fabulous!!
Lots of great details.thanks for the specifics they make it much easier to adapt to my needs and preferences
quite the nifty table!
thanks DW!
Job well done , strong enough to put a vise on if you want to.
yes, it would be but I'm planning on mounting a vise to a concreted post just off the shop awning so I can really use to crank on stuff if I need. keeping an eye out on CL for good older one :D
👍👍 great idea great build!!
thanks Bob!
Great upgrade you made! I may have some comments, maybe you already figure it out, but I will share them with you. For the clamp maybe you could modify the clamp so you do not need to disassemble it and or use both hands to install it. You could also add some slots where the clamp may get in from the top without need to disassemble or take it into two parts. The idea of the circular hinge for later be able to setup stoppers or 90 degree angles it great! I love it! You may take something in considerations the female part may get stuff or filled with debris with the time. Maybe would be great to open the hole of the hinge all the way through so it never get obstructed or filled.
Which plasma do you use or recomend? For hobby or house improvement proyects
I just started to follow you and I can't stop watching your videos, you inspired me to build some projects at home, thanks for share your knowlege in the best clarity way possible.
Man my name is mark I'm from Guyana I started watching your project and man your work look solid like a rock you look like someone that I can look up to in building anything knowing that it will be strong you are my inspiration man yeah! Even thou they say that look are deceiving I will take my chances hit me up when you get this I need some strong guidance I love making stuff than buying it
Thank you for sharing I was looking for some ideas and I love this one ☝🏼
Very creative...thanks for sharing
Looks good Joe... Sorry I am running behind... Very busy time of year here... Keep on keeping on...
Отличная идея !!! Классная работа. Обязательно повторю такой стол себе. Спасибо !!!
Excellent, many great ideas watching your build of this table. Clean, functional and well thought out. Thanks for sharing.
This is awesome build. Good one. Great idea.
Absolutely awesome! And thanks for the dimensions.
Great table. This is great. Good guy has hands of Gold ! Everything is well thought out . Hello you man from Kyrgyzstan !
Nice work!
thanks CD!
The best work Table I ever seen . I'm copping it and make one! Thank you for the inspiration.
I really liked the table. Your channel is great. One more subscribed from Brazil, Rio de Janeiro.
Great work I love what you did with the table
thanks!
Excellent design my friend...Thank so much...I like so much your work bench...God Bless you...
Nice job, great update👍👍👍Felix from Moscow