Turbine fire Protection-1&2 | Fire protection logic | Turbine Protection | Thermal power plant

Turbine fire Protection-1&2 | Fire protection logic | Turbine Protection | Thermal power plant
• Actions after Boiler t...
/ @kpatelbla
Power Plant technical Pratyush

[@manohardhaker423]

Very good topic.....also nice explan....

[@deepakkewat3547]

Nice sir

[@ujjalsonamukhi]

Thanks 🙏

[@deepakkewat3547]

Nice sir,

[@BhaskarGore-q4d]

Well explain sir....

[@kpatelbla]

Thanks for watching

[@Suman_shukla]

Thank you so much sir 😊

[@0503manoj]

Sir
Agar fire protection act hoga to HP/LP BYPASS valve open hoga ya nahi...?
Please explain sir

[@kpatelbla]

Actually in case of fire protection operated vacuum breaker open in protection so HP & LP Bypass must be closed means both not open in this case.

[@0503manoj]

Thanks you sir

[@0503manoj]

Sir
It will be followed in both conditions. As Fire protection 1 and fire protection 2
Means
If both protection acted then HP/LP by pass valve will be fast open ...?

[@ashutoshkumarpandey3099]

Sir, Please make a video for Mill fire , Aph fire and bunker fire 🔥

[@kpatelbla]

Ok

[@aegon5399]

Sir ji Agar HPCF line me leakage Hoti hai ya fir HPCF pump me leakage hoti hai To FIRE PROTECTION-1 Daba sakte hai kya??
FP-2 me MOT LEVEL pe Interlock hai but
FP-1 Me aisa Koi logic ni hai To kya HPCF Fluid ko behne de Ya fir FP-1 Daba sakte hai??

[@nitinbhonsle9534]

Sir.... What about operation of vacuum breaker in channel 1 and 2 for its opening?

[@kpatelbla]

In case of FP 1 vacuum breaker remains closed but in case of fire protection 2 operated vacuum breaker protection open as total lube oil system protection stopped so it is necessary to costing down down turbine as soon as possible.

[@motive0507]

Sir, I have doubt please clarify
Coal burner elevations like A,B,C,....J and oil burner elevations like AB,CD,...
sir,if we want to give some burner tilt like 30%,then tilt will occur in all coal and oil elevations or can we give the tilt to particular oil or coal elevation?

[@kpatelbla]

It is always common command to all elevations coal and oil burner, never for any individual burner otherwise it would create flame failure due to disturbance of fire ball consequently disturbance in flame intensity.

[@sandeepgajbhiye4913]

Why DC EOP, DC JOP ON in fire prot 2. in case of actual fire because fire may become heavy in case of oil supply

[@kpatelbla]

Exectly Total oil system protection off in case of FP 2