This tripod gets it done. You are so right it does have some limitations, but for the price you cannot beat it. It is held up for me for more than three years.
Agreed. I use this tripod in a dedicated interview studio where it never needs to move. It's fine for that but: 1. The leg latches are a cheap brittle plastic. I wouldn't expect them to survive a lot of handling. 2. The head is not smooth at all and can't counter balance much if any weight. PS. I have a Manfrotto combo that has lasted me over 20 years! The Sachtler FlowTec system sure looks sick, though.
I actually just picked up one of these because it wasn't in my budget to get more expensive legs for each of my setups. I would have to say that, in 2 years, the price has dropped significantly ($120 reg, $99 with coupon), so the price is absolutely impossible to beat for the value of what you get. The tripod head, seems to be upgraded too, as in your video the pan and tilt are of poor tension, and they clearly listen to their customers, because I am using a MUCH heavier ENG rig just shy of the max weight for this setup, and when i adjust the pan/tilt, they are smooth as butter, with the tension at about what I would normally set it too for cameras within that weight range. So for being a cheap system, it's impressive to say how well it works in a professional setting. As for a head replacement with tension controls, they now make a "professional" version of the head that can hold more weight and has both pan/tilt tension controls for $89. So if you get this tripod at the $99 mark when it comes up and the head doesn't work to you, at least spending another $89 isn't breaking the bank.
I bought this tripod a few weeks back with the same head, and gave it a go with tracking aircraft at about 800mm with a Nikon Coolpix P1000. I could not get a smooth pan on the X-axis due to the lack of damping. I'm going to bite the bullet and upgrade the head on it and see how it goes. I can't fault the rest of it however.
I bought the same tripod and the pan is very smooth, not loose at all and you can adjust the tightness. I love it!! I don’t know why anyone would not like it!! Maybe the one I bought was a newer model.
This will be perfect for shooting gigs at venues. Because it can get a bit rough at these places, so an expensive tripod is ruled out. And 200cm, looks over the crowds heads too. Thanks :)
A detailed and honest review of the Neewer Heavy Duty Video Tripod dear Nate's Film Tutorial! Thanks for sharing this information with us! Well, we have a Manfrotto professional tripod for our Panasonic HC-X1 camera and we are very satisfied with it! We joined your inspiring channel! Recently we uploaded a teaser of a very special short film, ( which is in progress ), we hope you will find it interesting! With friendly greetings and kind wishes, Alex and Alexandra
Thanks for the review. I recently saw someone with this tall tripod, and I had to find out if it could replace my Vinten Pro Touch ones, that I've had for over a decade... They are great but I need something really tall to get over the heads of crowds. This Newer one (pun) looks like it will fit the bill. I will just swap the heads over with my Vinten, so the weaknesses you found on the Newer head will not affect me. I also have that Manfrotto head that you showed in your video, and you can get an adapter to use it on your Newer legs, as it is a really smooth panning head… 🙏🏿
Thanks for this video bud, I was thinking of picking this one up as a cheap fluid head option for the time being, but might as well just save up and bite the bullet. I need some tension in the head and this video basically answered all my questions.
3:00 youre constantly trying to tilt the screen throughout the video but the cage is in the way. not every camera must have a cage on it. cool video tho
HOHOHO introducing "the professional....." was a big statement.... 😳 I kept looking for a professional tripod for 2 month & still hard to find even considering Sachtler in 2nd hand for "reasonable pricepoint"... My advise it to be more concise in details such as weight, bounce & other details. For sure it's not for me, as I'm sure you have the potential to create more informative content. Filmed alright, music too loud, need more information. But the effort is noted 😉 (sorry for the dushy comment it really isn't written with bad heart)
Personally, if I'm gonna have a tripod that's only useful for locked-off shots, I'd rather it at least be lighter and less bulky than this beast. There's no reason to haul around the weight of the crutch-style legs and the bulky head; something with photo-style single legs and a photo ballhead would be lighter, smaller, and simpler to get set up.
Nice video but... how can you compare a 1500$ manfrotto with a 130$ neweer tripod? it's like to say that a Ferrari performs "slightly" better than a Fiat 500.... :-)
want smooth pans on a basic tripod? put a rubber band on the grip arm of the tripod and pull the band with the tip of your finger. shots will be smooth as butter.
Video with massgae all India Subject facilites Method school bord cammunication photos massange all topic email to CST railway station educatioan dept mumbai city small requieast to massanger.
Video with massgae sure school bord Subject facilites bmc office Subject educatioan all topic email to USA priminister office USA nation all topic email to place small requieast to massanger.
This tripod gets it done. You are so right it does have some limitations, but for the price you cannot beat it. It is held up for me for more than three years.
Nice, I still keep mine in my car as a spare! Thanks for sharing Roberto!
I’m back! I’ve got more content in the works! If you are interested in this tripod you can check it out here geni.us/YI5LjWF
Agreed. I use this tripod in a dedicated interview studio where it never needs to move. It's fine for that but:
1. The leg latches are a cheap brittle plastic. I wouldn't expect them to survive a lot of handling.
2. The head is not smooth at all and can't counter balance much if any weight.
PS. I have a Manfrotto combo that has lasted me over 20 years! The Sachtler FlowTec system sure looks sick, though.
Thanks for sharing! Pretty much confirmed my theories lol. Maybe I’ll review the sachtler one day
I have had to tension the latches about 2 years into using it. A small allen wrench does the trick.
Great comparison and review! I appreciate getting right to the point and the brevity of the video!
Appreciate it Kevin! I know youtube likes longer videos, but I prefer the concise explanations
I actually just picked up one of these because it wasn't in my budget to get more expensive legs for each of my setups. I would have to say that, in 2 years, the price has dropped significantly ($120 reg, $99 with coupon), so the price is absolutely impossible to beat for the value of what you get. The tripod head, seems to be upgraded too, as in your video the pan and tilt are of poor tension, and they clearly listen to their customers, because I am using a MUCH heavier ENG rig just shy of the max weight for this setup, and when i adjust the pan/tilt, they are smooth as butter, with the tension at about what I would normally set it too for cameras within that weight range. So for being a cheap system, it's impressive to say how well it works in a professional setting.
As for a head replacement with tension controls, they now make a "professional" version of the head that can hold more weight and has both pan/tilt tension controls for $89. So if you get this tripod at the $99 mark when it comes up and the head doesn't work to you, at least spending another $89 isn't breaking the bank.
I bought this tripod a few weeks back with the same head, and gave it a go with tracking aircraft at about 800mm with a Nikon Coolpix P1000. I could not get a smooth pan on the X-axis due to the lack of damping. I'm going to bite the bullet and upgrade the head on it and see how it goes. I can't fault the rest of it however.
I bought the same tripod and the pan is very smooth, not loose at all and you can adjust the tightness. I love it!!
I don’t know why anyone would not like it!!
Maybe the one I bought was a newer model.
Huh, I guess that’s good!
This will be perfect for shooting gigs at venues. Because it can get a bit rough at these places, so an expensive tripod is ruled out. And 200cm, looks over the crowds heads too. Thanks :)
Great use! I still keep mine in my car… just in case!
A detailed and honest review of the Neewer Heavy Duty Video Tripod dear Nate's Film Tutorial! Thanks for sharing this information with us! Well, we have a Manfrotto professional tripod for our Panasonic HC-X1 camera and we are very satisfied with it! We joined your inspiring channel! Recently we uploaded a teaser of a very special short film, ( which is in progress ), we hope you will find it interesting! With friendly greetings and kind wishes, Alex and Alexandra
I added a bowl leveler to my Manfrotto to get the best of both worlds! Total game changer.
Thanks for the review. I recently saw someone with this tall tripod, and I had to find out if it could replace my Vinten Pro Touch ones, that I've had for over a decade... They are great but I need something really tall to get over the heads of crowds. This Newer one (pun) looks like it will fit the bill. I will just swap the heads over with my Vinten, so the weaknesses you found on the Newer head will not affect me. I also have that Manfrotto head that you showed in your video, and you can get an adapter to use it on your Newer legs, as it is a really smooth panning head… 🙏🏿
Sweet! Thanks for sharing
Thanks for this video bud, I was thinking of picking this one up as a cheap fluid head option for the time being, but might as well just save up and bite the bullet. I need some tension in the head and this video basically answered all my questions.
Glad it was helpful! Which tripod are you looking at saving up for?
Own this, I gotta say it’s a great price. However in my opinion it’s ridiculous that there’s no way to go lower.
This an awesome video I just got the meewer video tripod but I having trouble loosening the resistance knob
3:00 youre constantly trying to tilt the screen throughout the video but the cage is in the way. not every camera must have a cage on it. cool video tho
Thanks for the video. So glad I didn’t get it because I’m needing one for my URSA mini 4.6k and panning is VERY important
Glad it was helpful! I would say this tripod makes a decent backup solution but there are some limitations and better pro tripods out there!
Can you add a Manfrotto 502 head to this?
Hey! You’ll need a bowl tripod head or adapter
@@NatesFilmTutorials Much thanks.
Awesome video
Great video. By the way, Your 400$ Manfrotto set up is 700€ in Europe!
oof, I got fortunate I was able to pick it up for around $250 on sale, around 4 years back
HOHOHO introducing "the professional....." was a big statement.... 😳 I kept looking for a professional tripod for 2 month & still hard to find even considering Sachtler in 2nd hand for "reasonable pricepoint"... My advise it to be more concise in details such as weight, bounce & other details. For sure it's not for me, as I'm sure you have the potential to create more informative content. Filmed alright, music too loud, need more information.
But the effort is noted 😉 (sorry for the dushy comment it really isn't written with bad heart)
Boy bye.
@@bimadereq4070 good luck in your persuit
Personally, if I'm gonna have a tripod that's only useful for locked-off shots, I'd rather it at least be lighter and less bulky than this beast. There's no reason to haul around the weight of the crutch-style legs and the bulky head; something with photo-style single legs and a photo ballhead would be lighter, smaller, and simpler to get set up.
True! It does hold weight well and performs smooth tilts. But if you don’t need that their are definitely smaller options
Nice video but... how can you compare a 1500$ manfrotto with a 130$ neweer tripod? it's like to say that a Ferrari performs "slightly" better than a Fiat 500.... :-)
want smooth pans on a basic tripod? put a rubber band on the grip arm of the tripod and pull the band with the tip of your finger. shots will be smooth as butter.
Great tip! I tried it with the head on this tripod and it was still too loose
That poor panning is a deal breaker for me so thanks for making this video.
Thanks! Glad it was helpful!
The panning is awesome!
Thanks for sharing!
I'm glad I watched this video. I am tired of cheap tripods.
Glad to help Lonnie!
hi - whats that sexy rig you are using there? :)
Haha I got you - ua-cam.com/video/ChA60jKQOSo/v-deo.html
@@NatesFilmTutorials thx 😊
75mm bowl head or nothing.
Video with massgae all India Subject facilites Method school bord cammunication photos massange all topic email to CST railway station educatioan dept mumbai city small requieast to massanger.
Video with massgae sure school bord Subject facilites bmc office Subject educatioan all topic email to USA priminister office USA nation all topic email to place small requieast to massanger.