So simple and easy, but oh so accurate. Using ordinary masking tape for lining up the holes for dowels is pretty much fool-proof. I used this method several times after I made this video and with the same results: perfectly lined up dowels. Now I should mention that the tape locates the centre point precisely, but it's up to you to drill the hole straight. Using a brad-point bit is mandatory and getting a feel for drilling at a 90 degree angle is also very important. However, you can use a block of wood with a hole drilled on the drill press to help guide the drill bit straight, if drilling freehand. Or just drill the holes on a drill press if you have one. But with that said, the holes don't need to be drilled at the exact angle - they just need to be close and the joint will go together without any problem. The important thing (and why the dowel centre pins failed) is that the holes are in perfectly lined up on both parts, and that's what the tape trick does. Try it out for yourself!
Can you talk about the glue you’re using (and why it’s not the common Titebond)? How well does it last in that tube? Do you puncture the rear seal? Thanks!
Please will someone tell me how you manage to drill holes with those wood drills. All my friends who work with wood like me find wood bits are useless at clearing the swarth and usually stop progressing into your workpiece. We always end up throwing them back in the box and use twist drills. I have bought expensive bits and even had the them sharpened- no use - any ideas ?
@@garypautard1069 Hmmm.. y'know, I have the same problem. I noted that John's using brad point bits. They look like they might have deeper flutes and some sort of steeper flute angle, which might help clear the swarth. I also admired how he used tiny pin marks... nice and accurate, unlike my clumsy, thick-pointed awl. Those brad points go right into the tiny marks with no hesitation about exact placement. This particular video has convinced me... I'm definitely going to switch out my everyday set of of conventional "either-metal-or-wood" bits and move to to brad points for my woodworking, since I rarely need to drill holes in metal.
Well I thought the best part of my day today would be easting lunch with friends then watching the Super Bowl but no. I was wrong. It was sipping coffee at 6am and watching one of the simplest and most elegant woodworking tips I've ever seen on UA-cam. 🤯
@@pathemep OOOOOHHH!! So I can have a family sized bowl of Fruit Loops cereal or Chunky Sirloin Burger soup!! Awesome, thanks. No need for a swimming pool now!
1:25 the whole idea is perfectly explained and demonstrated in the first 1:25. THANK YOU! I hate resorting to video instructions demonstrating how to complete a task (whatever it may be) because there’s usually a 30 second intro, and brief summary of why the person wants to do that thing, a minute or two explaining what they’re going to be doing in this “short” video, maybe an anecdote or two about their dog, then an ad spot, thanks to our sponsors, a whole 2-3 minutes outlining the safety procedures, what tools you’ll need, where to find them, how much you can expect to pay, another explanatory 2-3 minutes about the underlying theories involved, then FINALLY they begin. 15 minutes later I know how to remove my front fender to access my fog lights. You get straight to the point. The value of efficiency cannot be overstated. Thank you for a great video! I’ve tried this but I never thought to use an awl. Getting the actual holes to line up is too difficult, but using the awl is genius!
Hey john, a bit off topic but, it is always a joy watching your videos with ZERO sponsors or ads popping up every few minutes! one of the super rare few.
I like the "trick" very much but what I don't get it is how you drill the holes in the CORRECT ANGLE to make the dowels fit in BOTH sides of the workpieces? If you know what I mean.
Honestly, for a man who's been doing a lot of woodworking in the past 30 some years. Did thousands of dowel holes! Lots were perfect, lots were complete disasters. Even with top-notch jigs. Your idea? Your idea is so ridiculously idiotic that it's absolutely genius! Brilliant! I'll have to try that one on my next build that requires dowels. Thanks. Love your videos!
@@gsp911 Do you really and TRULY think that it makes any sort of difference???? Do you have any clue about how many methods and ideas there are when it comes to joinery??? Do you know how many tips & tricks I've shared in my 30 past years of woodworking that weren't mine & still been told how great it was thanks for the tip? It's a simple way of saying the way you did it, was a very good idea that i never thought of. Thanks for the tip, NOT WHO THE HELL CREATED IT or anything ridiculous like that! It's appreciating one's technic that many may not have thought of.
@@samking4179perhaps it's not HIS invention, but HE show it to them who don't know this trick ! Big difference, no ? I didn't know now I will use it for sure. Thank you for this video.
Hey John. Just have to say that I have watched so many of your videos , learned SO MUCH from you, and I think that this is the most genius idea you’ve ever had. You definitely are as they say smarter than the average bear. You make me proud to be Canadian. Hey Lol. But I SERIOUSLY hope that one of these ideas you come up with will make you a shit load of cash, you deserve it. I say that not as a suck up comment, because you could easily take your knowledge and teach it at a Trades School and make money teaching the future generation how to PROPERLY build. God knows they need all the help they can get . Anyway thanks for all your knowledge.
I’ve been a subscriber to your videos since long before you became a full time UA-camr, and videos like this are why. No BS, and clever original ideas that I don’t find anywhere else. You’re the best!
It’s insane the amount of knowledge that can be acquired on the internet. I didn’t have anyone to mentor me, so I’ve been soaking up all of these videos. Thanks for sharing all of your wisdom!
On the miter that you did, even the grain of the wood was almost perfectly aligned. That is a GREAT idea. No jigs, No expensive tools. Thanks for sharing, keep up the awesome work!
that's absolutely excellent. no messing with finding the centers, no measuring, no jigs required. certainly if one was doing many of these for a large project, or making multiples of something then perhaps a jig might be quicker overall, but if you're just assembling a handful of joints, that's a really excellent method. thanks!
Every time you think you seen it all, John pulls something like this out of his sleeve. Just brilliant, simple and effective ! Tape manufacturers are gonna make a killing 😅. Great little tutorial John 👌I hope this gets a lot of views it certainly deserves it.
This method saved my project. I tried a number of things that semi worked. After refilling the mistakes with dowels and redrilling, I finally got the holes to match up.
Simple and practical for anyone to use. Was very nice and thoughtful of you to demonstrate the process, and for different common joints too, and so reaffirming that it actually works in practice. I do have centering pins, but as you showed, one cannot hold the second workpiece flush with the first because of the pins protruding, and then accuracy depends on aligning the parts with finger feel or other flat surfaces for alignment. Your trick allows flush alignment. With a doweling jig, after drilling on the first workpiece, it can be tricky to figure out the right way to clamp the jig to the second workpiece. Your method works like a no-brainer. Thank you, John!
Awesome! Hardest part about this are the drill angles. Amazed you were able to do it freehand ... never would have thought that slight discrepancies are irrelevant.
The simplicity of this is just stunning, I have a not great dowl jig and honestly this actually looks about as quick, and a lot more accurate, thank you for your fantastic videos
I commented before, but had to refresh on this great idea. Without question, this is the simplest, cheapest, & ultra high quality dowel systemin the internet. The ONLY issue is drilling orthogonal holes which is simple to manage with a right angle drilling jig if you have terrible free handling it. Huzzah John Heisz!!!
When I saw you do this tape trick the first time, I immediately thought, "Why didn't I think of that!!??" Which makes this a brilliantly simple idea (it is brilliant in it simplicity). Thank you for sharing it!
It's so simple that it is genius. Thanks for sharing such a brilliant tip. See this is why I drop everything when a notification comes through for one of your videos.
Super tip and timing! I’m going to be working on a new project and lining up the dowels and getting tight joints was one of my stumbling blocks. Thank you!
It's good to know that this old dog can still learn a trick or two, how's the saying go John, upstairs for thinking and downstairs for dancing!!! Thanks John for sharing this one I never know when it's going to come in handy! As always buddy 💯% 👍 🇬🇧.
LOL, dowel pins, $2.25 for 8 (4 sizes x 2 ea.) delivered from Temu... His alignment issue is resolved by using a guide to align the boards to "set" the pins for the 2nd side drilling: use a square for anything right angle, straight edge for straight alignment. For your dowel "jig" use a scrap of wood drilled on a drill press (or at least dead accurate with a guide like a square) that is the right size to limit the drill hole depth perfectly for the dowels. Drill holes about 1/4" apart or so (more than you need) and mark them on the side of the board. Now just lay it down and using those marks on the side, line it up where you want the holes, clamp both boards down and drill away as many of the holes as you like. After transferring the first hole with the dowel pins, use the guide to drill the first hole, put a pin in it then will lock the drill guide in place, and drill the rest of the holes. His problem with the dowel pins came from drilling the holes at a bad angle, as geometry tells us about parallel holes...
This is awesome for lining up the hole positions. The next critical piece is ensuring you drill the holes accurately for the dowels to be aligned. Of course, the dowel pins suffer from the same problem.
Dowel pins at least cut the problem in half. With one side already drilled, its alignment is guaranteed to be perfect. Make those first holes in the mitered piece, and you're left drilling in a flat, level surface, maximizing your means of drilling those perfectly as well. Add in that you're not using up any consumable, and I'll happily stick with dowel pins.
Whilst I agree that the tape method is more accurate than the dowel pins, I did notice that your drill angle was off when you did the dowel pin demonstration. Your drill was not aligned to the dowel direction in the wood. So predictably, your joint was off. Having said that, I don't want to take away from this innovative idea. Sure is a great way to do tricky dowelling when a jig wont help. I'll absolutely use this method!
Thank you very much. I need to do exactly this to fix a broken chair. I though of using a dowel but was wondering how to line it up. This solution is perfect, much appreciated.
Hi John, one question, in minute 1:30 how do you make sure the angle of the holes matches? if I want to joint to pieces on a 45 degree angle, how to make sure the angle of the holes will match? I understand the method to ensure the holes position match on both pieces, but my concern is on the drilling, specially on 45 degrees. Thanks!
Thank you so much for this tip! Just ran into this angled dowel problem and your toe tip was so amazing and worked perfectly! Thanks so much for sharing
Clever idea! Thanks. In 2019 I managed to drill holes in the top and sides of a video cabinet I'd made in 1999 (and a removal guy had broken the top off it in 2013 and snapped it in half). In about 2015 a guy fixed it with figure 8 connectors but it was always loose. I'd never heard of dowel centre pins until 2024 and didn't see this video of yours with the wonderful tape method until 2024, but I removed the figure 8s and managed to line the dowels and the holes up without needing backup from a Sumo wrestler! Just a bit of gentle, female persuasion where the drill bit angle might have been slightly off square when I was drilling the holes. I used Titebond III to glue the dowels and top onto the sides and it's 100% successful, rock solid Tasmanian Oak!
Excellent!!! Another problem with those dowel marking thingamajiggers is that I would misplace them lose them under a workbench or something a lot easier than I would lose the role of masking tape.
Don't you just keep them in the same box/tray where you keep your shorty dowels? Plus it's easy to make replacement ones if you saw the head off a nail and cut it down to the appropriate length.
2/13/23; Green masking tape for Dowell joint perfection...! ..Yes ! Love your method. Will use it next time I need this. Much enjoy watching your channel. Your use of voice over, studio lighting, camera close ups & 'wide'shots are also on pro level. Keep up your good work! A+👍👍👍👏👏🪚🛠⚙️🍺😊
If you're going to be doing lots of the same holes on identical pieces, you can also use a scrap piece of wood. Just put the scrap over the work piece you're drilling into, and drill through the scrap and into your work piece. The scrap is your template now. Just lay it over the next work piece, lined up in the same way, and use the existing holes to drill into the second work piece. Rinse and repeat. You can even keep the template if you think you'll be making more of your project in the future.
I think the fit would also depend on the angle at which the holes were drilled. I was surprised that your freehand hole angles matched so well that the joint fit tight.
I believe the alignment of the holes is more important than the hole angles being the same. Wood is slightly flexible and compressible to allow for minor inaccuracies. As long as you're pretty close it should work.
Hello John, wow, so many great ideas to connect wood. Yes, these are simple wood connections that you can make even you don't have a workshop with lots of machines! This tricks are exactly that for what I was searching for. So thank you so much for sharing this very helpful Video! With greetings from Germany Matthias
That's a cool idea, John! I'm getting ready to build some lanterns and dowels are the solution I need for strength and to not have pocket holes involved. I don't mind pocket holes, but as a rank amateur, I want to stretch out and learn other joinery methods for upcoming projects.
Apart from the excellent idea and execution , the use of masking tape warrants a mention.Wonderful stuff. I can't live without it. Use a quality tape everywhere. I even use it to tape/ reinforce a band aid brand closure on my hand if injured.
Yesterday I was looking at a Wolfcraft doweling jig, at a Hornbach store. It was 13 euros. For these money, I can buy 3 rolls of 24mm x 55m 3M Scotchblue masking tape. And, probably I would have enough tape for hundreds of dowels. I'm glad I didn't get my hands on that Wolfcraft jig. Many thanks John!
Now *that's* a very clever idea. Never would have occurred to me and I've never seen it on any other channel. I think you may be the first, John. Thanks for sharing your great idea.
Man, this is amazing. I'm starting my first actual woodworking project - a coffee table with angled mitered legs. I have been struggling to find a way to fixture my doweling jig on the small mitered cross sections. You probably saved me from ruining my pieces and having to start over. Thanks!!
Wow. Thanks. Broke a chair leg and was hoping to mend it using a dowel jig. Came here looking for a tutorial and l think you just saved me 40 bucks. Just hope l can get the broken leg pieces far enough apart to not have to disassemble the whole chair.
As you said, dowel jigs can be used for some applications, but not for all. If you don't have a dowel jig, if you don't want to make a dowel jig, or if the pieces you are joining are irregular, or are of very different sizes, then your approach will work well. I agree with you about using dowel pin markers; they work, after a fashion. Guiding them properly sometimes takes quite a bit of additional setup time and effort. Your approach is far better, which I can say from personal experience. It works like a charm. Great video and great advice! 👍👍
Great idea. As a dowel newbie I am going to take your masking tape technique and make it mine, my last experiment with a biscuit joiner was a sloppy mess.
Genius idea. Instant reason to subscribe right there. Do the long time John Subscribers want to show me which other John ideas are this good? Super fast video, really clear, instantly applicable. I'm off to the shed
You are a genius. This technique worked perfectly fine. Thanks a lot. I used transparent celo tape which helps to see the markings and used a marker pen over it before transferring (pasting). 👍
Without a doubt, the finest tip (For me) I’ve seen anywhere. I will definitely try this next time I’m in my shop. Only took a few seconds to decide to subscribe. THANK YOU!
You continuously amaze me with your skill and deductive reasoning,while simple in procedure,it is a VERY BIG IDEA John. There are those in specialty tape mfg. That could ,if awake, make a product. I appreciate all that you demonstrate. Thank You!
Wow, after struggling with various jigs and ending up frustrated beyond belief, this is pure genius! A simple solution is usually the best one isn’t it, thank you for sharing…can’t wait to try it!
So simple and easy, but oh so accurate. Using ordinary masking tape for lining up the holes for dowels is pretty much fool-proof. I used this method several times after I made this video and with the same results: perfectly lined up dowels.
Now I should mention that the tape locates the centre point precisely, but it's up to you to drill the hole straight. Using a brad-point bit is mandatory and getting a feel for drilling at a 90 degree angle is also very important. However, you can use a block of wood with a hole drilled on the drill press to help guide the drill bit straight, if drilling freehand. Or just drill the holes on a drill press if you have one.
But with that said, the holes don't need to be drilled at the exact angle - they just need to be close and the joint will go together without any problem. The important thing (and why the dowel centre pins failed) is that the holes are in perfectly lined up on both parts, and that's what the tape trick does.
Try it out for yourself!
@@snarkybuttcrack Have you tried brad point bits? They helped me with the same type problem.
Please warn your followers from false avatars using your name and channel logo.
@NICEFINENEWROBOT so I didn't win a major award?
@@jameyfark8877 What's the issue?
Can you talk about the glue you’re using (and why it’s not the common Titebond)? How well does it last in that tube? Do you puncture the rear seal? Thanks!
What is most impressive to me is how John can free-hand drill the holes straight and to a consistent depth
Me muttering under my breath: "oh so he just free hand drills the holes like some kinda lunatic?"
Please will someone tell me how you manage to drill holes with those wood drills. All my friends who work with wood like me find wood bits are useless at clearing the swarth and usually stop progressing into your workpiece. We always end up throwing them back in the box and use twist drills. I have bought expensive bits and even had the them sharpened- no use - any ideas ?
I got a set of Harbor Freight pilot bits, they’re pretty bad. Dewalt, Irwin or Bosch are pretty good.
@@garypautard1069 Hmmm.. y'know, I have the same problem. I noted that John's using brad point bits. They look like they might have deeper flutes and some sort of steeper flute angle, which might help clear the swarth. I also admired how he used tiny pin marks... nice and accurate, unlike my clumsy, thick-pointed awl. Those brad points go right into the tiny marks with no hesitation about exact placement. This particular video has convinced me... I'm definitely going to switch out my everyday set of of conventional "either-metal-or-wood" bits and move to to brad points for my woodworking, since I rarely need to drill holes in metal.
*swarf, not swarth.
Well I thought the best part of my day today would be easting lunch with friends then watching the Super Bowl but no. I was wrong. It was sipping coffee at 6am and watching one of the simplest and most elegant woodworking tips I've ever seen on UA-cam. 🤯
What's the "Super Bowl..?"...
@@YerBrwnDogAteMyRabit Oh did the AI part of the Google search engine crashed again!? 🤣👍
@@AmazonasBiotop I think it must have. I certainly hope I didn't miss it, it sounds important 🤣
@@YerBrwnDogAteMyRabit it's huge open top vessel for fluids, like super big one
@@pathemep OOOOOHHH!! So I can have a family sized bowl of Fruit Loops cereal or Chunky Sirloin Burger soup!! Awesome, thanks. No need for a swimming pool now!
1:25 the whole idea is perfectly explained and demonstrated in the first 1:25. THANK YOU! I hate resorting to video instructions demonstrating how to complete a task (whatever it may be) because there’s usually a 30 second intro, and brief summary of why the person wants to do that thing, a minute or two explaining what they’re going to be doing in this “short” video, maybe an anecdote or two about their dog, then an ad spot, thanks to our sponsors, a whole 2-3 minutes outlining the safety procedures, what tools you’ll need, where to find them, how much you can expect to pay, another explanatory 2-3 minutes about the underlying theories involved, then FINALLY they begin.
15 minutes later I know how to remove my front fender to access my fog lights.
You get straight to the point. The value of efficiency cannot be overstated. Thank you for a great video! I’ve tried this but I never thought to use an awl. Getting the actual holes to line up is too difficult, but using the awl is genius!
Haha, true!
Hey john, a bit off topic but, it is always a joy watching your videos with ZERO sponsors or ads popping up every few minutes! one of the super rare few.
The "random" placement also ensures one cannot accidentally join the wrong pieces together.
good point!
Also you don’t have put some ¶ø#>% identifier on every single corner or edge of a box or frame. If it fits, it sits!
Ah. Thanks for that. I did wonder why someone who obviously knows their way around a set of tools, "couldn't" line them up properly.
I like the "trick" very much but what I don't get it is how you drill the holes in the CORRECT ANGLE to make the dowels fit in BOTH sides of the workpieces? If you know what I mean.
@@leonlionheart5927probably just takes practice
Honestly, for a man who's been doing a lot of woodworking in the past 30 some years. Did thousands of dowel holes! Lots were perfect, lots were complete disasters. Even with top-notch jigs. Your idea? Your idea is so ridiculously idiotic that it's absolutely genius! Brilliant! I'll have to try that one on my next build that requires dowels. Thanks. Love your videos!
idiotic? have I been using this word wrong my entire life?
It's not really his idea, that method has been used for decades.
@@gsp911 Do you really and TRULY think that it makes any sort of difference???? Do you have any clue about how many methods and ideas there are when it comes to joinery??? Do you know how many tips & tricks I've shared in my 30 past years of woodworking that weren't mine & still been told how great it was thanks for the tip?
It's a simple way of saying the way you did it, was a very good idea that i never thought of. Thanks for the tip, NOT WHO THE HELL CREATED IT or anything ridiculous like that! It's appreciating one's technic that many may not have thought of.
@@stephandelange1776 Amen
@@samking4179perhaps it's not HIS invention, but HE show it to them who don't know this trick ! Big difference, no ? I didn't know now I will use it for sure. Thank you for this video.
A great solution for those of us who don't dowel often, nice. The grain matched joint was a nice touch as well.
Hey John. Just have to say that I have watched so many of your videos , learned SO MUCH from you, and I think that this is the most genius idea you’ve ever had. You definitely are as they say smarter than the average bear. You make me proud to be Canadian. Hey Lol. But I SERIOUSLY hope that one of these ideas you come up with will make you a shit load of cash, you deserve it. I say that not as a suck up comment, because you could easily take your knowledge and teach it at a Trades School and make money teaching the future generation how to PROPERLY build. God knows they need all the help they can get . Anyway thanks for all your knowledge.
I’ve been a subscriber to your videos since long before you became a full time UA-camr, and videos like this are why. No BS, and clever original ideas that I don’t find anywhere else. You’re the best!
It’s insane the amount of knowledge that can be acquired on the internet. I didn’t have anyone to mentor me, so I’ve been soaking up all of these videos. Thanks for sharing all of your wisdom!
This man is clearly in the pay of Big Masking Tape.
I hope you’re joking…
They pay him with masking tape.
On the miter that you did, even the grain of the wood was almost perfectly aligned. That is a GREAT idea. No jigs, No expensive tools. Thanks for sharing, keep up the awesome work!
Absolutely BRILLIANT, ACCURATE, CHEAP and EASY. Can't wait to try it !
that's absolutely excellent. no messing with finding the centers, no measuring, no jigs required. certainly if one was doing many of these for a large project, or making multiples of something then perhaps a jig might be quicker overall, but if you're just assembling a handful of joints, that's a really excellent method. thanks!
Every time you think you seen it all, John pulls something like this out of his sleeve. Just brilliant, simple and effective ! Tape manufacturers are gonna make a killing 😅. Great little tutorial John 👌I hope this gets a lot of views it certainly deserves it.
Yeah you know someone is going to come out with tape that has little crosshairs printed along it just for this. "Dowel Alignment Tape"
Simple, effective, brilliant! Thanks John! :)
This method saved my project. I tried a number of things that semi worked. After refilling the mistakes with dowels and redrilling, I finally got the holes to match up.
That's a brilliant idea! Thanks for sharing, John! Keep up the good work! 👍
Simple and practical for anyone to use. Was very nice and thoughtful of you to demonstrate the process, and for different common joints too, and so reaffirming that it actually works in practice. I do have centering pins, but as you showed, one cannot hold the second workpiece flush with the first because of the pins protruding, and then accuracy depends on aligning the parts with finger feel or other flat surfaces for alignment. Your trick allows flush alignment. With a doweling jig, after drilling on the first workpiece, it can be tricky to figure out the right way to clamp the jig to the second workpiece. Your method works like a no-brainer. Thank you, John!
Awesome! Hardest part about this are the drill angles. Amazed you were able to do it freehand ... never would have thought that slight discrepancies are irrelevant.
An actual woodworking innovation. This is why John is the king of woodworking.
The simplicity of this is just stunning, I have a not great dowl jig and honestly this actually looks about as quick, and a lot more accurate, thank you for your fantastic videos
I commented before, but had to refresh on this great idea. Without question, this is the simplest, cheapest, & ultra high quality dowel systemin the internet. The ONLY issue is drilling orthogonal holes which is simple to manage with a right angle drilling jig if you have terrible free handling it. Huzzah John Heisz!!!
A nice trick for sure but us mortals are going to need to combine it with a drill guide to get strait holes.
When I saw you do this tape trick the first time, I immediately thought, "Why didn't I think of that!!??" Which makes this a brilliantly simple idea (it is brilliant in it simplicity). Thank you for sharing it!
It's so simple that it is genius. Thanks for sharing such a brilliant tip. See this is why I drop everything when a notification comes through for one of your videos.
Thanks :)
Have literally been scratching my head on how to strengthen a miter joint for a project and you give me this. God bless you.
Always the simplest way is the best way! Marvelous, appreciated!
Das ist die beste Art Dübel passgenau zu setzen, die ich bisher gesehen habe, werde ich ab sofort nur noch nutzen. Danke dir.
Super tip and timing! I’m going to be working on a new project and lining up the dowels and getting tight joints was one of my stumbling blocks. Thank you!
It's good to know that this old dog can still learn a trick or two, how's the saying go John, upstairs for thinking and downstairs for dancing!!! Thanks John for sharing this one I never know when it's going to come in handy! As always buddy 💯% 👍 🇬🇧.
"Simplicity is the ultimate sophistication" Very handy hack, thanks a lot for sharing man!! Cheers from Alberta- Canada!!
👏👏👏👏👏good for people starting out in carpentry who can’t afford these jig dowl tools, so simple
LOL, dowel pins, $2.25 for 8 (4 sizes x 2 ea.) delivered from Temu... His alignment issue is resolved by using a guide to align the boards to "set" the pins for the 2nd side drilling: use a square for anything right angle, straight edge for straight alignment.
For your dowel "jig" use a scrap of wood drilled on a drill press (or at least dead accurate with a guide like a square) that is the right size to limit the drill hole depth perfectly for the dowels. Drill holes about 1/4" apart or so (more than you need) and mark them on the side of the board. Now just lay it down and using those marks on the side, line it up where you want the holes, clamp both boards down and drill away as many of the holes as you like. After transferring the first hole with the dowel pins, use the guide to drill the first hole, put a pin in it then will lock the drill guide in place, and drill the rest of the holes.
His problem with the dowel pins came from drilling the holes at a bad angle, as geometry tells us about parallel holes...
Just getting into this craft as a hobby, I’ve struggled so much to get the dowels to match. Gonna try this method out! Thanks for the amazing video.
This is awesome for lining up the hole positions. The next critical piece is ensuring you drill the holes accurately for the dowels to be aligned. Of course, the dowel pins suffer from the same problem.
Dowel pins at least cut the problem in half. With one side already drilled, its alignment is guaranteed to be perfect. Make those first holes in the mitered piece, and you're left drilling in a flat, level surface, maximizing your means of drilling those perfectly as well. Add in that you're not using up any consumable, and I'll happily stick with dowel pins.
Lining up Holes Perfectly is the Bane of my Existance! Thanks John!!
That is awesome! I love the simple ideas that solve apparently tricky problems. Thank you John!
Hey bud, you made my life brighter with your no- nonsense, direct to the point video! Thank you!
Whilst I agree that the tape method is more accurate than the dowel pins, I did notice that your drill angle was off when you did the dowel pin demonstration. Your drill was not aligned to the dowel direction in the wood. So predictably, your joint was off. Having said that, I don't want to take away from this innovative idea. Sure is a great way to do tricky dowelling when a jig wont help. I'll absolutely use this method!
Where was it off they all looked good to me.
John, this is a sign of a wise man; thinking outside of the box. Excellent idea!
Only a man with experience, craftsmanship and a healthy mind can come up with a simple but effective solution like this. Bravo!
Thank you very much. I need to do exactly this to fix a broken chair. I though of using a dowel but was wondering how to line it up. This solution is perfect, much appreciated.
Hi John, one question, in minute 1:30 how do you make sure the angle of the holes matches? if I want to joint to pieces on a 45 degree angle, how to make sure the angle of the holes will match? I understand the method to ensure the holes position match on both pieces, but my concern is on the drilling, specially on 45 degrees. Thanks!
Thank you so much for this tip! Just ran into this angled dowel problem and your toe tip was so amazing and worked perfectly! Thanks so much for sharing
Absolutely brilliant! I will not be forgetting this one. Now I just need to figure out how to integrate dowels into my next project :)
Clever idea! Thanks. In 2019 I managed to drill holes in the top and sides of a video cabinet I'd made in 1999 (and a removal guy had broken the top off it in 2013 and snapped it in half). In about 2015 a guy fixed it with figure 8 connectors but it was always loose. I'd never heard of dowel centre pins until 2024 and didn't see this video of yours with the wonderful tape method until 2024, but I removed the figure 8s and managed to line the dowels and the holes up without needing backup from a Sumo wrestler! Just a bit of gentle, female persuasion where the drill bit angle might have been slightly off square when I was drilling the holes. I used Titebond III to glue the dowels and top onto the sides and it's 100% successful, rock solid Tasmanian Oak!
Excellent!!!
Another problem with those dowel marking thingamajiggers is that I would misplace them lose them under a workbench or something a lot easier than I would lose the role of masking tape.
Don't you just keep them in the same box/tray where you keep your shorty dowels? Plus it's easy to make replacement ones if you saw the head off a nail and cut it down to the appropriate length.
2/13/23; Green masking tape for Dowell joint perfection...! ..Yes ! Love your method. Will use it next time I need this. Much enjoy watching your channel. Your use of voice over, studio lighting, camera close ups & 'wide'shots are also on pro level. Keep up your good work! A+👍👍👍👏👏🪚🛠⚙️🍺😊
If you're going to be doing lots of the same holes on identical pieces, you can also use a scrap piece of wood. Just put the scrap over the work piece you're drilling into, and drill through the scrap and into your work piece.
The scrap is your template now. Just lay it over the next work piece, lined up in the same way, and use the existing holes to drill into the second work piece. Rinse and repeat.
You can even keep the template if you think you'll be making more of your project in the future.
That is also a good idea.
I think the fit would also depend on the angle at which the holes were drilled. I was surprised that your freehand hole angles matched so well that the joint fit tight.
I believe the alignment of the holes is more important than the hole angles being the same. Wood is slightly flexible and compressible to allow for minor inaccuracies. As long as you're pretty close it should work.
Hello John,
wow, so many great ideas to connect wood.
Yes, these are simple wood connections that you can make
even you don't have a workshop with lots of machines!
This tricks are exactly that for what I was searching for.
So thank you so much for sharing this very helpful Video!
With greetings from Germany
Matthias
Thank you for sharing, super "trick", The word "trick" actually demeans what is a very smart tip. So nice of you to share with the community.
A medieval man walks up to Leonardo, "Mr. Davinci, where did you learn all of your genius?" "John Heisz of course."
That's a cool idea, John! I'm getting ready to build some lanterns and dowels are the solution I need for strength and to not have pocket holes involved. I don't mind pocket holes, but as a rank amateur, I want to stretch out and learn other joinery methods for upcoming projects.
Genius idea.
I despise center pins, they never work.
Have a JessEm dowel jig that works superbly but tape is cheaper :^)
This a genius idea, I have previously tried to use dowels to fix joints and failed, this is a game changer. Thanks
One of those delightfully obvious things that it takes a special mind to make obvious to we more mundane types. Thank you, John. Again.
Unbelievable! I went right out to my shop and tried it! worked perfectly! Thanks John
Apart from the excellent idea and execution , the use of masking tape warrants a mention.Wonderful stuff. I can't live without it. Use a quality tape everywhere. I even use it to tape/ reinforce a band aid brand closure on my hand if injured.
Yesterday I was looking at a Wolfcraft doweling jig, at a Hornbach store. It was 13 euros. For these money, I can buy 3 rolls of 24mm x 55m 3M Scotchblue masking tape. And, probably I would have enough tape for hundreds of dowels. I'm glad I didn't get my hands on that Wolfcraft jig. Many thanks John!
Fabulous! I have a need for this RIGHT NOW!
Thank you!
This is what is fabulous about the Internet.
Now *that's* a very clever idea. Never would have occurred to me and I've never seen it on any other channel. I think you may be the first, John. Thanks for sharing your great idea.
Man, this is amazing. I'm starting my first actual woodworking project - a coffee table with angled mitered legs. I have been struggling to find a way to fixture my doweling jig on the small mitered cross sections.
You probably saved me from ruining my pieces and having to start over.
Thanks!!
Wow. Thanks. Broke a chair leg and was hoping to mend it using a dowel jig. Came here looking for a tutorial and l think you just saved me 40 bucks. Just hope l can get the broken leg pieces far enough apart to not have to disassemble the whole chair.
Thank you for that tip! This will save me hours of hardship! May you blessed for sharing this tip! 😀
I JUST bought an [expensive] Jessem dowel kit and now that I see this, I feel like a complete tool 😂 This is so simple; brilliant!
I hope you are making a lot of money with your channel because you deserve it in a serious way! Thanks for this GREAT tip!
Brilliant! Genius! I came looking for way to match dowel holes for two planks. I searched. I found this. Thanks!
John, In the last one, you even got the grain to line up. Now that is magic!
As you said, dowel jigs can be used for some applications, but not for all. If you don't have a dowel jig, if you don't want to make a dowel jig, or if the pieces you are joining are irregular, or are of very different sizes, then your approach will work well.
I agree with you about using dowel pin markers; they work, after a fashion. Guiding them properly sometimes takes quite a bit of additional setup time and effort. Your approach is far better, which I can say from personal experience. It works like a charm.
Great video and great advice! 👍👍
Great idea. As a dowel newbie I am going to take your masking tape technique and make it mine, my last experiment with a biscuit joiner was a sloppy mess.
Genius idea. Instant reason to subscribe right there. Do the long time John Subscribers want to show me which other John ideas are this good? Super fast video, really clear, instantly applicable. I'm off to the shed
Better than any diy jig that i have seen so far
Brilliant!
Thanks David :)
Gotta hand it to ya John, this is as great an idea as the screw-in-table-saw-plate for scribbing a line off the table saw fence.
If there were a Nobel prize for woodworking-I would nominate you! Great tip.
You are a genius. This technique worked perfectly fine. Thanks a lot.
I used transparent celo tape which helps to see the markings and used a marker pen over it before transferring (pasting). 👍
Without a doubt, the finest tip (For me) I’ve
seen anywhere. I will definitely try this next time I’m in my shop. Only took a few seconds to decide to subscribe. THANK YOU!
This is the best new technique I've seen all year!
Brilliant! This is one of those "why the heck didn't I think of that" kind of things. Well done sir.
I just built some bookcases and used this trick. It works perfectly! Thanks for the tip.
Going to try this on my next project utilizing dowels...great technique!
Alignment challenges is the reason why I stayed away from dowels.
Well, that's a pretty agricultural solution, and like many such things that you'd use in the field, damned clever! Bravo, John!
John I tried your technique on my project to make some pantry doors taller by joining an 8” section to the bottoms. It worked FANTASTICALLY!
AWESOME! one of the MANY reasons I been subbed for 10yrs u da man john!
You continuously amaze me with your skill and deductive reasoning,while simple in procedure,it is a VERY BIG IDEA John. There are those in specialty tape mfg. That could ,if awake, make a product. I appreciate all that you demonstrate. Thank You!
What a great, simple, and accurate method! Thank you!
thanks much for the info, i used it today and worked like a dream, i also drilled the holes straight which is a strange thing, thanks again John
Wow, after struggling with various jigs and ending up frustrated beyond belief, this is pure genius! A simple solution is usually the best one isn’t it, thank you for sharing…can’t wait to try it!
Thanks for the tip 👍
Just what I needed to see for my diy desk project and adding a 2nd tier shelf! Thanks John!!
Thanks. First dowel joints I'd made (attaching a bench seat panel to the tops of two side panels) and everything aligned perfectly. Much appreciated.
Mr Heisz always has something to offer. Thank you.
Clever idea and one that actually works!! Congratulations.
The best days of all are when you learn something new, great technique !
Love it. Once in a while a very simple but effective idea comes along that is very useful. This is one of those ideas. Thanks
Hi from England, fantastic tip John, I'll definitely be trying this next time.
First time doing dowels today, so many marks on my wood. Thanks for the save.
Amazing! Loved the idea. Can't find a good dowel jig my region. You just saved me a lot of hassle! subbed