I purchased a used one as the piece is a bit pricey, but the machine ua-cam.com/users/postUgkxG6fbm3cHBd7CNTjk5D-dwYe9c9tCB9ZN has surpassed my expectations. We sand small parts by hand often, sized around 1"x1/2," and specifically look for a piece that's designed to be vertical. The motor has plenty of torque and great speed settings. The only inconvenience I had is that the disk measures 5" where we trim 6" stick-and-sand disks down easily by mounting it then cutting with a box cutter.
Edd. Never use body filler over paint. The correct way is to sand off the paint to bare metal and leave a feather edge to the paint, fill the dented area but don't overlap onto the feathered paint edge. Body filler is designed to use on metal only.
Chubbies swim trunks? The mind boggles! Unfortunately UA-cam is investigating ways of disabling ad blockers as UA-cam prime is coming away from subscription and is heading towards a more terrestrial TV based platform with ad's. There's a few sites that won't even allow access unless the ad blocker is disabled. But on saying this, I will forgive UA-cam simply because Cobra Kai is going ad based and its a small price to pay. I watch TV and put up with the ad's so it's no biggie.
Yeah, no kidding. Also, I love how he just happens to gloss over the fact that apparently, this was possibly originally a Blue Alfa, not red. If it had been me, I would've stripped it completely and resprayed it in its supposedly original Blue.
Jesus 1,000 dollars to paint that little bit you guys are getting ripped off. I'm painting my entire jeep for under 400 dollars using a high end paint brand.
I purchased a used one as the piece is a bit pricey, but the machine ua-cam.com/users/postUgkxG6fbm3cHBd7CNTjk5D-dwYe9c9tCB9ZN has surpassed my expectations. We sand small parts by hand often, sized around 1"x1/2," and specifically look for a piece that's designed to be vertical. The motor has plenty of torque and great speed settings. The only inconvenience I had is that the disk measures 5" where we trim 6" stick-and-sand disks down easily by mounting it then cutting with a box cutter.
This guy went from body work to mechanic work hahaha
Edd. Never use body filler over paint. The correct way is to sand off the paint to bare metal and leave a feather edge to the paint, fill the dented area but don't overlap onto the feathered paint edge. Body filler is designed to use on metal only.
this is incorrect. It is actually recommended modern body filler not be placed over bare metal but epoxy primer instead.
You can use filler over paint if its prepped.
Bullshit
I thought the video was about how to remove paint not mechanical
Thanx Edd, for your super video !!
Thank you so much Edd 👍🏻
I have a big hole on the roof what can I use to fill it up
Im guessing this is before paintless dent removal was around.
Im guessing this comment was before you had a brain.
@@funkyUA-camhandel Have you counted how many skeletons you've got in the closet?
The bonnet was all micro blisters any way no point paying some one to remove a dent on a bonnet you are painting anyway
Wow ed! I didn't think you would ever come back to wheeler dealers. I'll be the first to say......GOOD TO HAVE YOU BACK SIR!
He didn't come back. This episode is over a decade old.
Once you remove the paint and rust from a vehicle, do you have to automictically have to place paint on it or can it be put on at anytime?
Sooner the better to stop the bare metal from rusting again
@@ShadowIYI would covering up in plastic in the garage stop the rusting or is that worse?
@@88bitcube50 should be ok assuming you don't get any water on it. I'd recommend at least priming it for now
@@ShadowIYI got it hey thank you so much.
I love how he just glosses over the fact that the car was apparently possibly originally Blue not Red.
So does it work with any sand paper ??? To remove the paint from the car ??
40 or 80 grit yes. thats what im using its rough an u wanna get down to the metal..im recording videos too
We miss you where is your new show?
Wouldn't it have helped if he poured some boiling water on the dent before trying to pop it out, at the start of the video?
Wouldn't it have helped if you made some sandwiches before coming in the comment section?
@@funkyUA-camhandel 🤣🤣🤣
He would have needed to ffollow up with ice cold water to have any hope of it contracting it to it's original memory.
Do you have a video on restoring the time on this car?
This isn't back to the future kid.
@@funkyUA-camhandel lol
why no PDR???
Bring back Edd!
No disposable gloves :O This must have been before he found out that he had high levels of hydrocarbons in his blood
Absolute cowboy 😂😂 I wouldn't let him paint a wheelbarrow
MY GOD HES FROM MANCHESTER
A little unsettling that I had to watch an ad for Chubbies swimtrunks before I got to the Edd China video.
just get adblock on your browser
Just get the Extension Adblock Plus for Your Browser it works flawlessly without any issues and i haven't had to get a replacement Adblock Extension
Chubbies swim trunks? The mind boggles!
Unfortunately UA-cam is investigating ways of disabling ad blockers as UA-cam prime is coming away from subscription and is heading towards a more terrestrial TV based platform with ad's. There's a few sites that won't even allow access unless the ad blocker is disabled. But on saying this, I will forgive UA-cam simply because Cobra Kai is going ad based and its a small price to pay. I watch TV and put up with the ad's so it's no biggie.
This guy is like the Gordon Ramsay of cars
Too much going on just strip the paint.
Duh
Yeah, no kidding. Also, I love how he just happens to gloss over the fact that apparently, this was possibly originally a Blue Alfa, not red. If it had been me, I would've stripped it completely and resprayed it in its supposedly original Blue.
Filler over paint?!?
Also, I love how he just negates to mention that this car was apparently supposedly originally a BLUE Alfa, not red.
C O O L !
En español q no entiendo
X2
0
119
Cm
Jesus 1,000 dollars to paint that little bit you guys are getting ripped off. I'm painting my entire jeep for under 400 dollars using a high end paint brand.
Do tell what brand?
@@JoseContreras-mv5yz The Custom shop/Restoration shop brand
@@JoseContreras-mv5yz tcpglobal
@@JoseContreras-mv5yz Apparently I can't link the links to you
Title misleading
#edd easy 👉 👕 !!!!!!!!!!!!!😊😏😁👄👅👍
Please don’t do what this guy did.
This is so dumb! Why would anyone stop bodywork and paint to do mechanics? That’s how you got fish eyes in the first place 🤨